Bluetooth+ for Blackmagic Взлом 2.3.3 + Чит Коды
Разработчик: We Are Empire PTY LTD
Категория: Фото и видео
Цена: 499,00 ₽ (Скачать бесплатно)
Версия: 2.3.3
ID: com.weareempire.BMDBluetoothControl
Скриншоты
Описание
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control supported on Pocket 4K only.
This is part of the new Pro feature set, which also includes Multi-Cam mode.
-- MULTI-CAM MODE --
Multi-Cam Mode is now part of the Pro feature set, and includes these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group, or control everything straight from Bluetooth+
• Give your cameras Nicknames to quick, easy control
Multi-Cam gives you control over the following features synced across an entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group
And of course, everyone has access to all of these amazing features:
• Follow Focus (limited support for EF Mount cameras). See below for more info
• Zoom Control on supported lenses
• Trigger Stills capture
• Record Start/Stop
• White Balance + Tint, including 5 helpful presets and Auto White Balance
• Audio Controls
• Trigger Autofocus (for supported electronic lenses with autofocus enabled on lens)
• Off-speed frame rates
• Aperture (for supported electronic lenses)
• Shutter Angle
• ISO
• Auto-Exposure Control
• Active Card
• Power On/Off
• Monitor Overlays
• Codec & Resolution
• Enter metadata in the Digital Slate (including location data from your iPhone or iPad if you give permission)
• Control Lock - locks critical controls while recording, preventing accidental settings changes during takes
-- Follow Focus --
You can now pull focus wirelessly right from your iPhone or iPad. There are some limitations outlined below.
• Currently only fully supports Pocket 4K, but as of v1.4 we now have limited support for EF mount cameras - Pocket 6K, Ursa Mini Pro G1 & G2
• The camera does not supply the app with any information on the lenses current focus distance, so the app will not update in real time if you pull focus manually on the lens
• Due to the nature of bluetooth, focus pulls may not be 100% smooth. It works well for nice slow pulls, but fast pulls my not feel entirely natural and organic. Unfortunately this is a limitation of the available technology.
• On EF mount cameras, we can only offset focus from its current position, with no broader knowledge of where the lens is in its focus range. This means that focus marks are not possible. In addition, focus pulls on EF mount cameras can be quite jerky depending on the lens in use.
-- Playback Control --
With Bluetooth+ you can control the playback of clips right from your iOS device. There are some notable limitations at this point. Currently you can:
• Start playing a clip, either forwards or backwards
• Navigate between clips, either forwards or backwards
For now, you will not be able to:
• Pause a clip that is already playing
• Change the speed of a clip that is already playing
• Control clip looping
-- Zoom Control --
Control the zoom level on supported lenses. For the most part, this will only work on MFT lenses with electronic zoom. We are currently unaware of EF lenses that support this feature
-- Slate-Only Mode --
As the name suggests, this feature locks the app into Slate-Only mode, without the ability to change critical camera settings or start/stop recording. This means you can let an assistant keep metadata up to date without the fear of interfering with important camera settings.
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control supported on Pocket 4K only.
This is part of the new Pro feature set, which also includes Multi-Cam mode.
-- MULTI-CAM MODE --
Multi-Cam Mode is now part of the Pro feature set, and includes these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group, or control everything straight from Bluetooth+
• Give your cameras Nicknames to quick, easy control
Multi-Cam gives you control over the following features synced across an entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group
And of course, everyone has access to all of these amazing features:
• Follow Focus (limited support for EF Mount cameras). See below for more info
• Zoom Control on supported lenses
• Trigger Stills capture
• Record Start/Stop
• White Balance + Tint, including 5 helpful presets and Auto White Balance
• Audio Controls
• Trigger Autofocus (for supported electronic lenses with autofocus enabled on lens)
• Off-speed frame rates
• Aperture (for supported electronic lenses)
• Shutter Angle
• ISO
• Auto-Exposure Control
• Active Card
• Power On/Off
• Monitor Overlays
• Codec & Resolution
• Enter metadata in the Digital Slate (including location data from your iPhone or iPad if you give permission)
• Control Lock - locks critical controls while recording, preventing accidental settings changes during takes
-- Follow Focus --
You can now pull focus wirelessly right from your iPhone or iPad. There are some limitations outlined below.
• Currently only fully supports Pocket 4K, but as of v1.4 we now have limited support for EF mount cameras - Pocket 6K, Ursa Mini Pro G1 & G2
• The camera does not supply the app with any information on the lenses current focus distance, so the app will not update in real time if you pull focus manually on the lens
• Due to the nature of bluetooth, focus pulls may not be 100% smooth. It works well for nice slow pulls, but fast pulls my not feel entirely natural and organic. Unfortunately this is a limitation of the available technology.
• On EF mount cameras, we can only offset focus from its current position, with no broader knowledge of where the lens is in its focus range. This means that focus marks are not possible. In addition, focus pulls on EF mount cameras can be quite jerky depending on the lens in use.
-- Playback Control --
With Bluetooth+ you can control the playback of clips right from your iOS device. There are some notable limitations at this point. Currently you can:
• Start playing a clip, either forwards or backwards
• Navigate between clips, either forwards or backwards
For now, you will not be able to:
• Pause a clip that is already playing
• Change the speed of a clip that is already playing
• Control clip looping
-- Zoom Control --
Control the zoom level on supported lenses. For the most part, this will only work on MFT lenses with electronic zoom. We are currently unaware of EF lenses that support this feature
-- Slate-Only Mode --
As the name suggests, this feature locks the app into Slate-Only mode, without the ability to change critical camera settings or start/stop recording. This means you can let an assistant keep metadata up to date without the fear of interfering with important camera settings.
История обновлений
2.3.3
2022-07-30
- Fixes an issue introduced in firmware v7.9 where the app can't stop recording
- Fixes focus direction being swapped on firmware v7.9 for Pocket 4K users
- For Ursa Mini Pro users, fixes an issue where the app can cause the camera to power back on after walking away and coming back in range of the camera
- Fixes focus direction being swapped on firmware v7.9 for Pocket 4K users
- For Ursa Mini Pro users, fixes an issue where the app can cause the camera to power back on after walking away and coming back in range of the camera
2.3.1
2021-06-08
Fixes an issue where certain Nucleus-M models would not be found by Bluetooth+
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control are only supported on Pocket 4K.
This is part of the new Pro feature set, which also includes Multi-Cam mode. Anyone that has already purchased Multi-Cam automatically gets access to all Pro features. More features will continue to be added to Pro over time.
Aaaaannd, you can now give nicknames to your cameras. Hooray.
More good things on the way!
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control are only supported on Pocket 4K.
This is part of the new Pro feature set, which also includes Multi-Cam mode. Anyone that has already purchased Multi-Cam automatically gets access to all Pro features. More features will continue to be added to Pro over time.
Aaaaannd, you can now give nicknames to your cameras. Hooray.
More good things on the way!
2.3
2021-05-27
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control are only supported on Pocket 4K.
This is part of the new Pro feature set, which also includes Multi-Cam mode. Anyone that has already purchased Multi-Cam automatically gets access to all Pro features. More features will continue to be added to Pro over time.
Aaaaannd, you can now give nicknames to your cameras. Hooray.
More good things on the way!
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control are only supported on Pocket 4K.
This is part of the new Pro feature set, which also includes Multi-Cam mode. Anyone that has already purchased Multi-Cam automatically gets access to all Pro features. More features will continue to be added to Pro over time.
Aaaaannd, you can now give nicknames to your cameras. Hooray.
More good things on the way!
2.2
2021-04-17
-- BRAND NEW Apple Watch App --
Completely revamped Apple Watch app. You can now control almost all camera settings right from your wrist. You still need to connect via your iPhone, but once connected, you can start/stop recording, change presets , do almost anything you could want.
-- Camera Presets --
You can now save and recall camera settings at the tap of a button.
Moving from an interior to exterior shot? Have different settings for high-speed recording? Just save your presets and switch between almost any/all camera settings in just a second.
-- Pocket 6K Pro Support --
Control the built-in NDs on the Pocket 6K Pro, as well as full codec & resolution support.
Stay tuned for some more exciting updates soon!
Completely revamped Apple Watch app. You can now control almost all camera settings right from your wrist. You still need to connect via your iPhone, but once connected, you can start/stop recording, change presets , do almost anything you could want.
-- Camera Presets --
You can now save and recall camera settings at the tap of a button.
Moving from an interior to exterior shot? Have different settings for high-speed recording? Just save your presets and switch between almost any/all camera settings in just a second.
-- Pocket 6K Pro Support --
Control the built-in NDs on the Pocket 6K Pro, as well as full codec & resolution support.
Stay tuned for some more exciting updates soon!
2.1
2020-10-27
• Audio Level Controls, with some limitations:
- Levels can be set from Bluetooth+, but changes made on camera are not sent to the app, so we recommend validating settings before recording
- Input source selection is limited to either Internal Mics, or XLR
- Changing the Input Source setting on Ursa Mini Pro will change the setting for both audio channels, on Pocket Cameras it can only change Channel 1 input
• Added False Color control (currently supported on Pocket cams only)
• iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
• Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays (Zebras, Frame Guides, Grids, Focus Assist)
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
- Levels can be set from Bluetooth+, but changes made on camera are not sent to the app, so we recommend validating settings before recording
- Input source selection is limited to either Internal Mics, or XLR
- Changing the Input Source setting on Ursa Mini Pro will change the setting for both audio channels, on Pocket Cameras it can only change Channel 1 input
• Added False Color control (currently supported on Pocket cams only)
• iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
• Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays (Zebras, Frame Guides, Grids, Focus Assist)
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
2.0.2
2020-10-26
• Adds False Color control (currently supported on Pocket cams only)
• iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
• Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays (Zebras, Frame Guides, Grids, Focus Assist)
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
• iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
• Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays (Zebras, Frame Guides, Grids, Focus Assist)
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
2.0.1
2020-10-20
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase (get in quick for special launch price). With Multi-Cam Mode, you'll get these fantastic features:
- Control up to 12 Blackmagic cameras at once
- Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
- You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
- Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
- Start/Stop Recording
- White Balance + Tint
- Project frame rate (off-speed frame rates not supported)
- Shutter Angle/Speed
- ISO
- Overlays (Zebras, Frame Guides, Grids, Focus Assist)
- Slate
- Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
- Trigger stills capture
- Iris control
- Focus + Zoom (on supported lenses)
- Codec + Resolution
- Playback control
- You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
--Other changes--
- Adds dedicated Autofocus button to Focus screen
- Fixes a bug where app could crash when accessing settings in Multi-Cam mode
- Fixes a bug where app could crash when tapping a camera in Multi-Cam mode on iPad
- Minor bug fixes
- Minor UI tweaks
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase (get in quick for special launch price). With Multi-Cam Mode, you'll get these fantastic features:
- Control up to 12 Blackmagic cameras at once
- Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
- You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
- Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
- Start/Stop Recording
- White Balance + Tint
- Project frame rate (off-speed frame rates not supported)
- Shutter Angle/Speed
- ISO
- Overlays (Zebras, Frame Guides, Grids, Focus Assist)
- Slate
- Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
- Trigger stills capture
- Iris control
- Focus + Zoom (on supported lenses)
- Codec + Resolution
- Playback control
- You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
--Other changes--
- Adds dedicated Autofocus button to Focus screen
- Fixes a bug where app could crash when accessing settings in Multi-Cam mode
- Fixes a bug where app could crash when tapping a camera in Multi-Cam mode on iPad
- Minor bug fixes
- Minor UI tweaks
2.0
2020-10-17
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase (get in quick for special launch price). With Multi-Cam Mode, you'll get these fantastic features:
- Control up to 12 Blackmagic cameras at once
- Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
- You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
- Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
- Start/Stop Recording
- White Balance + Tint
- Project frame rate (off-speed frame rates not supported)
- Shutter Angle/Speed
- ISO
- Overlays (Zebras, Frame Guides, Grids, Focus Assist)
- Slate
- Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
- Trigger stills capture
- Iris control
- Focus + Zoom (on supported lenses)
- Codec + Resolution
- Playback control
- You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
--Other changes--
- Fixed Slate-only mode
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase (get in quick for special launch price). With Multi-Cam Mode, you'll get these fantastic features:
- Control up to 12 Blackmagic cameras at once
- Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
- You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
- Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
- Start/Stop Recording
- White Balance + Tint
- Project frame rate (off-speed frame rates not supported)
- Shutter Angle/Speed
- ISO
- Overlays (Zebras, Frame Guides, Grids, Focus Assist)
- Slate
- Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
- Trigger stills capture
- Iris control
- Focus + Zoom (on supported lenses)
- Codec + Resolution
- Playback control
- You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
--Other changes--
- Fixed Slate-only mode
1.5
2020-09-27
Thanks everyone for your feedback and input. A good few things new in this update. It is strongly recommended that you are running the latest firmware from Blackmagic to enjoy the most reliable Bluetooth+ experience.
NEW FEATURES
• Ursa Mini Pro 12K support
• Zoom feature for supported lenses (generally MFT lenses + Pocket 4K)
• Stills capture button - requires latest firmware. Ursa Mini Pro G2 currently unsupported
• Playback control - requires latest firmware, there are some notable limitations listed in full app description
• Auto-Exposure control
• Zebra and Focus Assist toggling from app - Pocket Cameras only
• Improved Slate input - you can now manually type Scene and Take values, instead of having to use the directional arrows
FIXES
• Fixed an issue on the latest firmware where the app would not know which camera model was connected, and present ISO, Resolution and Codec choices for the Ursa Mini Pro regardless of camera model.
• Improved Bluetooth connection when app enters background
NEW FEATURES
• Ursa Mini Pro 12K support
• Zoom feature for supported lenses (generally MFT lenses + Pocket 4K)
• Stills capture button - requires latest firmware. Ursa Mini Pro G2 currently unsupported
• Playback control - requires latest firmware, there are some notable limitations listed in full app description
• Auto-Exposure control
• Zebra and Focus Assist toggling from app - Pocket Cameras only
• Improved Slate input - you can now manually type Scene and Take values, instead of having to use the directional arrows
FIXES
• Fixed an issue on the latest firmware where the app would not know which camera model was connected, and present ISO, Resolution and Codec choices for the Ursa Mini Pro regardless of camera model.
• Improved Bluetooth connection when app enters background
1.4
2020-02-21
As always, a big thanks to all our users, and for those providing feedback. This update has some key improvements, including:
- Limited Focus support for EF mount cameras
- Due to hardware limitations, it is only possible to offset focus relative to its current position, so setting focus marks is not possible
- Smoothness of the focus will depend on the lens in use. Some EF lenses can be quite jerky
- This feature is primarily useful setting focus before shooting, and may not be smooth enough to pull focus during a take
- Much improved UI, with tabbed navigation and…
- Mini Menu
- See key settings all in one place
- Tap a setting to jump its page
- Just swipe to hide/show the menu
- A new setting to lock controls while recording
- A number of bug fixes and improvements
- Limited Focus support for EF mount cameras
- Due to hardware limitations, it is only possible to offset focus relative to its current position, so setting focus marks is not possible
- Smoothness of the focus will depend on the lens in use. Some EF lenses can be quite jerky
- This feature is primarily useful setting focus before shooting, and may not be smooth enough to pull focus during a take
- Much improved UI, with tabbed navigation and…
- Mini Menu
- See key settings all in one place
- Tap a setting to jump its page
- Just swipe to hide/show the menu
- A new setting to lock controls while recording
- A number of bug fixes and improvements
1.3.2
2019-11-29
A big thank you to everyone that uses Bluetooth+
A quick note to all the Pocket 6K and Ursa Mini Pro users out there - sadly Follow Focus mode is only supported on the Pocket 4K - this is an issue on Blackmagic's end, not with the app. If that changes in the future, we will be sure to extend support to all possible cameras.
This update is somewhat minor in terms of functionality, but has laid the groundwork for some big improvements coming soon.
Changes include:
- Fixes a bug where new frame guides introduced in firmware v6.6 would cause the app to crash
- Introduces support for firmware v6.6 new frame guides, frame rates and resolutions
- Fixes issue where iris could not be set on some camera models and firmware versions
- Adds autofocus button to focus page (Pocket 4K only)
- There seems to be a bug in the Pocket 6K firmware that means changing codec from the app is only half possible. You can change between codec variants - e.g. ProRes 422 -> ProRes HQ, but not from ProRes -> BRAW. Hoping Blackmagic fix this in their next firmware release
Updating your cameras to the latest firmware is strongly recommended for most reliable app support.
Thanks and happy shooting!
A quick note to all the Pocket 6K and Ursa Mini Pro users out there - sadly Follow Focus mode is only supported on the Pocket 4K - this is an issue on Blackmagic's end, not with the app. If that changes in the future, we will be sure to extend support to all possible cameras.
This update is somewhat minor in terms of functionality, but has laid the groundwork for some big improvements coming soon.
Changes include:
- Fixes a bug where new frame guides introduced in firmware v6.6 would cause the app to crash
- Introduces support for firmware v6.6 new frame guides, frame rates and resolutions
- Fixes issue where iris could not be set on some camera models and firmware versions
- Adds autofocus button to focus page (Pocket 4K only)
- There seems to be a bug in the Pocket 6K firmware that means changing codec from the app is only half possible. You can change between codec variants - e.g. ProRes 422 -> ProRes HQ, but not from ProRes -> BRAW. Hoping Blackmagic fix this in their next firmware release
Updating your cameras to the latest firmware is strongly recommended for most reliable app support.
Thanks and happy shooting!
1.3.1
2019-06-03
This minor update fixes an issue where the app could crash when using the focus marks, as well as adds a help screen to explain focus marks usage. For other new features, read on below…
Thanks for your feedback! We've done our best to include as many requested features in this update as possible, including:
- Rack focus - set up to 3 focus marks and timings to rack between them (Pocket 4K only)
- Focus distance readout on supported lenses (Pocket 4K only)
- Resolution and codec support, including Windowed Sensor toggle
- Set focus peaking and zebra levels
- Improved frame-rate support
- Battery levels (can be temperamental on Pocket 4K due to firmware issues)
- Improved ISO support on Ursa Mini Pro
Please keep sending through your feedback, we do read it and do our best to implement what we can. Do keep in mind that there are some things that Blackmagic do not support. If there's something you'd like to see that's not in the app at this point, there is a good chance it's because it's not supported by Blackmagic's API, so do feel free to get in touch with them as well with your feature requests.
Thanks for your feedback! We've done our best to include as many requested features in this update as possible, including:
- Rack focus - set up to 3 focus marks and timings to rack between them (Pocket 4K only)
- Focus distance readout on supported lenses (Pocket 4K only)
- Resolution and codec support, including Windowed Sensor toggle
- Set focus peaking and zebra levels
- Improved frame-rate support
- Battery levels (can be temperamental on Pocket 4K due to firmware issues)
- Improved ISO support on Ursa Mini Pro
Please keep sending through your feedback, we do read it and do our best to implement what we can. Do keep in mind that there are some things that Blackmagic do not support. If there's something you'd like to see that's not in the app at this point, there is a good chance it's because it's not supported by Blackmagic's API, so do feel free to get in touch with them as well with your feature requests.
1.3
2019-05-21
Thanks for your feedback! We've done our best to include as many requested features in this update as possible, including:
- Rack focus - set up to 3 focus marks and timings to rack between them (Pocket 4K only)
- Focus distance readout on supported lenses (Pocket 4K only)
- Resolution and codec support, including Windowed Sensor toggle
- Set focus peaking and zebra levels
- Improved frame-rate support
- Battery levels (can be temperamental on Pocket 4K due to firmware issues)
- Improved ISO support on Ursa Mini Pro
Please keep sending through your feedback, we do read it and do our best to implement what we can. Do keep in mind that there are some things that Blackmagic do not support. If there's something you'd like to see that's not in the app at this point, there is a good chance it's because it's not supported by Blackmagic's API, so do feel free to get in touch with them as well with your feature requests.
- Rack focus - set up to 3 focus marks and timings to rack between them (Pocket 4K only)
- Focus distance readout on supported lenses (Pocket 4K only)
- Resolution and codec support, including Windowed Sensor toggle
- Set focus peaking and zebra levels
- Improved frame-rate support
- Battery levels (can be temperamental on Pocket 4K due to firmware issues)
- Improved ISO support on Ursa Mini Pro
Please keep sending through your feedback, we do read it and do our best to implement what we can. Do keep in mind that there are some things that Blackmagic do not support. If there's something you'd like to see that's not in the app at this point, there is a good chance it's because it's not supported by Blackmagic's API, so do feel free to get in touch with them as well with your feature requests.
1.2
2018-11-12
Introducing Follow Focus - wirelessly pull focus on your Pocket 4K with supported focus-by-wire lenses.
Also fixes a bug where users would not be able to stop recording when recording to an SSD on the Pocket 4K.
Also fixes a bug where users would not be able to stop recording when recording to an SSD on the Pocket 4K.
1.1.3
2018-10-06
Minor improvements for Pocket 4K users
1.1.2
2018-10-03
- Improved ISO support with the new Pocket Cinema Camera 4K
- Fixed bug where shutter speed would momentarily change on app connection
- Fixed bug where shutter speed would momentarily change on app connection
1.1.1
2018-08-22
NEW FEATURES
- Apple Watch Beta
- Redesign
- Autofocus trigger
- Better frame rate control, including off-speed switch
- Prevent Sleep option to keep screen on at all times
BUG FIXES
- Fixed issue where connect screen would not show
- Fixed bug where shutter would incorrectly show as speed instead of angle
- Apple Watch Beta
- Redesign
- Autofocus trigger
- Better frame rate control, including off-speed switch
- Prevent Sleep option to keep screen on at all times
BUG FIXES
- Fixed issue where connect screen would not show
- Fixed bug where shutter would incorrectly show as speed instead of angle
1.1
2018-08-21
NEW FEATURES
- Apple Watch Beta
- Redesign
- Autofocus trigger
- Better frame rate control, including off-speed switch
- Prevent Sleep option to keep screen on at all times
BUG FIXES
- Fixed bug where shutter would incorrectly show as speed instead of angle
- Apple Watch Beta
- Redesign
- Autofocus trigger
- Better frame rate control, including off-speed switch
- Prevent Sleep option to keep screen on at all times
BUG FIXES
- Fixed bug where shutter would incorrectly show as speed instead of angle
1.0
2018-05-01
Чит Коды на бесплатные встроенные покупки
| Покупка | Цена | iPhone/iPad | Андроид |
|---|---|---|---|
| Pro (Unlock all Pro features of Bluetooth+) |
Free |
HH191256338✱✱✱✱✱ | EB796EB✱✱✱✱✱ |
| Multi-Cam Control (Control multiple Blackmagic cameras at once) |
Free |
HH415280754✱✱✱✱✱ | DDAB053✱✱✱✱✱ |
Способы взлома Bluetooth+ for Blackmagic
- Промо коды и коды погашений (Получить коды)
Скачать взломанный APK файл
Скачать Bluetooth+ for Blackmagic MOD APK
Запросить взлом
Рейтинг
4.4 из 5
56 Голосов
Отзывы
Roman Rzh,
6k support
Hi guys! Thanks for the app! I love it! But Please add a focus support for 6k model! This is pretty much the only reason people buy this app. To use it as a substitution of FF
НикРонин,
LiDAR for autofocus support
Hello
the app is great
I beg you to make support for lidar for autofocusing with calibration, then there will be no price for your application, so that with the help of an iPhone that I install next to the lens, autofocus can work!
ps
suddenly you will make autofocus be smooth, and not abrupt jumps from one value to another, as it works in another similar application
the app is great
I beg you to make support for lidar for autofocusing with calibration, then there will be no price for your application, so that with the help of an iPhone that I install next to the lens, autofocus can work!
ps
suddenly you will make autofocus be smooth, and not abrupt jumps from one value to another, as it works in another similar application
Алекс лел,
add photo start stop
please add start -stop photo shot, need for stopmotion
4els,
disconnect
Dear developers, why are there problems with the disconnect? Already at two meters from the camera there is a break in communication. Tried both on ursa g2 and pocket 6k pro. The application was bought to control the camera that hangs on the black arm, but it cannot perform its function. Will this problem be solved? iPhone 12 Pro
pterodak,
Пультик ДУ
Приложение с версией Про стоит 1400р - работает на расстоянии 4-5 метров максимум. Нет функции видоискателя/плейбэка. Просто тупо пультик ДУ с настроечками бб и эксп. Мультикам тож глючной.
Покупать стоит только если камеру ставите где-то недоступно чтобы нажимать лапкой рек.
Покупать стоит только если камеру ставите где-то недоступно чтобы нажимать лапкой рек.
515051,
Thank you for reply
a clear answer to the questions and suggestions was given!
l34rner,
Режим multicam в pro вне работает как надо!
Купил данное приложение и расширеннный функционал ради съёмки на 3 камеры покет 4к. В итоге если до камеры больше 3х метров, связь якобы теряется. При этом работает синхростарт , но нет возможности подстроить что либо еще. Но самое главное, что даже когда все камеры видны, настройки не отрабатывают на всех камерах. Либо ползунки начинают хаотично прыгать и менять параметры от балды, или на двух срабатывает, а на третей нет. При этом часто меняются параметры, которые не надо было менять. Полностью неработающий pro режим считаю. Ipad 8 2020.
Stepakki12,
does not connect
iphone 11 to bmpcc 4k
support did not respond
so 1 star
support did not respond
so 1 star
ROTAX99,
Нет функции видоискателя
Приложение стоит 449рублей!
Вы можете только изменять настройки камеры,
регулировать фокус, но не имеет возможности использовать телефон как видеоискатель, очень печально! Конкуренты же почему-то имеют такую функцию...
Вы можете только изменять настройки камеры,
регулировать фокус, но не имеет возможности использовать телефон как видеоискатель, очень печально! Конкуренты же почему-то имеют такую функцию...
Kuzen.ru,
Не соединяется с камерой
«отличное» приложение, которое только находит камеру bmpcc 4k, ну а дальше просто пишет Connecting на чём собственно вся работа приложения и заканчивается!!! При этом аналогичные приложения других разработчиков и платные и бесплатные работают нормально! Не вздумайте это Г покупать
