Display0183M Взлом 1.3 + Чит Коды
Разработчик: Pekka Leppanen
Категория: Навигация
Цена: Бесплатно
Версия: 1.3
ID: com.pekkaleppanen.Display0183M
Скриншоты
Описание
Display0813M is a customisable app for sailors for NMEA information on iWatches, iPhones, iPads and Macs. It provides up to 27 configurable displays with a selection of over 30 sailing measurements from the boat’s NMEA network and polar tables.
For each measurement the minimum and maximum values and a time series graph are available. The polars data is interpolated: instead of just the tabulated data points also intermediate wind and boat speed data is available based on (bi)linear interpolation. The Wind Display has all key sailing information in context aware analog format. It provides comprehensive wind and heading information in both analog and digital format. It is based on the sailing context: going upwind, downwind or towards a waypoint and enhanced by the polars data.
Display 0813 connects to a NMEA 0813 Wi-Fi gateway such as B&G Vulcan, Zeus, GoFree or Yacht Devices NMEA 2000 Wi-Fi Gateway.
The supported NMEA 0183 sentences are:
BWR: Bearing and distance to waypoint
DBS: Depth below surface
DBT: Depth below transducer.
DPT: depth of water. Note: the Settings/Install sensor offset is added to the value given unless it is received in the NMEA0183 sentence.
CGA: Global Positioning System Fix data
GLL: Geographic position - Latitude / Longitude
HDG: Heading magnetic
HDM: Heading magnetic
HDT: Heading true
MWD: undocumented, based on Vulcan 7FS data, wind direction, wind speed (both magnetic and true)
MTW: water temperature (Note: value is red as it is, the Unit is always displayed °C)
MWV: Wind speed and angle (both relative and apparent)
RMB: XTE, range to destination, bearing to destination, destination closing velocity .
RMC: Speed over ground
RSA: Rudder sensor angle
VHW: Water speed and heading
VLW: Distance travelled through water
VPW: Speed - measured parallel to wind
VTG: Course over ground (T or M), speed over ground
VWR: Wind direction (A), wind speed (A)
WCV: Waypoint closure velocity
XDR: air temperature (°C), water temperature (°C) and barometric pressure (mbar).
XTE: Cross track error
The following data items ("measurements") are read from the NMEA data stream or derived from these and the boat's polar data..
Waypoint direction (WP dir, °M)
Waypoint distance (WP dst, distance unit)
VMG waypoint (WP VMG, boat speed unit)
Cross track error (XTE, distance unit )
Depth (Depth, depth unit)
Heading (Heading, °M)
Heading (Heading, °T)
Course (Course, °M)
Course (Course, °T)
Water speed (Speed, boat speed unit)
Speed over ground (SOG, boat speed unit)
Water temperature1 (Water tmp, °C)
Air temperature1 (Air tmp, °C)
Air pressure1 (Air pre, hPa)
Wind speed apparent (Wind Spd A, wind speed unit)
Wind angle apparent (Wind ang A, °)
Wind speed true (Wind Spd T, °)
Wind direction (Wind dir, °M)
Wind direction (Wind dir, °T)
VMG Wind (calculated)
Latitude (Latitude, DD°MM.mm’)
Longitude (Latitude, DD°MM.mm’)
Water Distance after reset (Wtr dst, distance unit )
Total water distance (Wtr dst T, distance unit )
Ground distance after reset (Grnd dst, distance unit)
Total ground distance (Grnd dst T, distance unit)
Velocity made good towards wind (Wind WMG, boat speed unit)
Heel (Heel, °)
Rudder (Rudder, °)
Boat target speed through the water (based on current polar table)
Boat speed of target speed (%)
Beat VMG boat target speed through the water
Run VMG boat target speed through the water3
Leeway (Leeway. °). Calculated difference Course °T - Heading °T
See user's guide at https://pbase.com/pekkal/display0183m
For each measurement the minimum and maximum values and a time series graph are available. The polars data is interpolated: instead of just the tabulated data points also intermediate wind and boat speed data is available based on (bi)linear interpolation. The Wind Display has all key sailing information in context aware analog format. It provides comprehensive wind and heading information in both analog and digital format. It is based on the sailing context: going upwind, downwind or towards a waypoint and enhanced by the polars data.
Display 0813 connects to a NMEA 0813 Wi-Fi gateway such as B&G Vulcan, Zeus, GoFree or Yacht Devices NMEA 2000 Wi-Fi Gateway.
The supported NMEA 0183 sentences are:
BWR: Bearing and distance to waypoint
DBS: Depth below surface
DBT: Depth below transducer.
DPT: depth of water. Note: the Settings/Install sensor offset is added to the value given unless it is received in the NMEA0183 sentence.
CGA: Global Positioning System Fix data
GLL: Geographic position - Latitude / Longitude
HDG: Heading magnetic
HDM: Heading magnetic
HDT: Heading true
MWD: undocumented, based on Vulcan 7FS data, wind direction, wind speed (both magnetic and true)
MTW: water temperature (Note: value is red as it is, the Unit is always displayed °C)
MWV: Wind speed and angle (both relative and apparent)
RMB: XTE, range to destination, bearing to destination, destination closing velocity .
RMC: Speed over ground
RSA: Rudder sensor angle
VHW: Water speed and heading
VLW: Distance travelled through water
VPW: Speed - measured parallel to wind
VTG: Course over ground (T or M), speed over ground
VWR: Wind direction (A), wind speed (A)
WCV: Waypoint closure velocity
XDR: air temperature (°C), water temperature (°C) and barometric pressure (mbar).
XTE: Cross track error
The following data items ("measurements") are read from the NMEA data stream or derived from these and the boat's polar data..
Waypoint direction (WP dir, °M)
Waypoint distance (WP dst, distance unit)
VMG waypoint (WP VMG, boat speed unit)
Cross track error (XTE, distance unit )
Depth (Depth, depth unit)
Heading (Heading, °M)
Heading (Heading, °T)
Course (Course, °M)
Course (Course, °T)
Water speed (Speed, boat speed unit)
Speed over ground (SOG, boat speed unit)
Water temperature1 (Water tmp, °C)
Air temperature1 (Air tmp, °C)
Air pressure1 (Air pre, hPa)
Wind speed apparent (Wind Spd A, wind speed unit)
Wind angle apparent (Wind ang A, °)
Wind speed true (Wind Spd T, °)
Wind direction (Wind dir, °M)
Wind direction (Wind dir, °T)
VMG Wind (calculated)
Latitude (Latitude, DD°MM.mm’)
Longitude (Latitude, DD°MM.mm’)
Water Distance after reset (Wtr dst, distance unit )
Total water distance (Wtr dst T, distance unit )
Ground distance after reset (Grnd dst, distance unit)
Total ground distance (Grnd dst T, distance unit)
Velocity made good towards wind (Wind WMG, boat speed unit)
Heel (Heel, °)
Rudder (Rudder, °)
Boat target speed through the water (based on current polar table)
Boat speed of target speed (%)
Beat VMG boat target speed through the water
Run VMG boat target speed through the water3
Leeway (Leeway. °). Calculated difference Course °T - Heading °T
See user's guide at https://pbase.com/pekkal/display0183m
История обновлений
1.3
2023-05-04
Logging definitions through a file:
- Edit the provided example file “D0183M-DefinitionExample.txt” in the app directory and rename it to “D0183M-Definition.txt”. Editing is most easily done in the iCloud.
- The logging definitions are then read and activated every time the app starts.
- Stop using the definitions file by first stopping the logs manually (Settings > Log&Filter > Selective log: Stop) and then deleting or renaming the file.
Using the definitions file is an alternative to user interface (Settings > Log&Filter).
Upgrading
- From version 1.3.0: after the app upgrade activate the naming changes by resetting reset logging & filtering settings (before starting click. Settings“ > “Log&Filter”>”Reset selective logging & filtering”)
- From 1.3.1 or later: no action needed after the app upgrade.
- Earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
- Edit the provided example file “D0183M-DefinitionExample.txt” in the app directory and rename it to “D0183M-Definition.txt”. Editing is most easily done in the iCloud.
- The logging definitions are then read and activated every time the app starts.
- Stop using the definitions file by first stopping the logs manually (Settings > Log&Filter > Selective log: Stop) and then deleting or renaming the file.
Using the definitions file is an alternative to user interface (Settings > Log&Filter).
Upgrading
- From version 1.3.0: after the app upgrade activate the naming changes by resetting reset logging & filtering settings (before starting click. Settings“ > “Log&Filter”>”Reset selective logging & filtering”)
- From 1.3.1 or later: no action needed after the app upgrade.
- Earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
1.3.4
2023-04-20
New in version 1.3:
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Version 1.3.4: Error correction: initializing wind speed preference
Upgrading from 1.3.1, 1.3.2 or 1.3.3: no action needed after the app upgrade.
From 1.3.0: after the app upgrade activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
From earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Version 1.3.4: Error correction: initializing wind speed preference
Upgrading from 1.3.1, 1.3.2 or 1.3.3: no action needed after the app upgrade.
From 1.3.0: after the app upgrade activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
From earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
1.3.3
2023-01-19
New in version 1.3:
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Version 1.3.3: Watch data synchronisation optimised
Upgrading from 1.3.1 or 1.3.2: no action needed after the app upgrade.
From 1.3.0: after the app upgrade activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
From earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Version 1.3.3: Watch data synchronisation optimised
Upgrading from 1.3.1 or 1.3.2: no action needed after the app upgrade.
From 1.3.0: after the app upgrade activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
From earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
1.3.2
2023-01-16
Error corrections:
- Corrected the typo in Wind Display's compass rose (10° degrees to port)
- Changed restoring the connection between the phone and the watch after the the watch app wakes up from sleep
Upgrading from earlier versions
- 1.3.1: no actions needed after the app upgrade
- 1.3.0: after the app upgrade activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
- Earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
New in version 1.3.0:
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
- Corrected the typo in Wind Display's compass rose (10° degrees to port)
- Changed restoring the connection between the phone and the watch after the the watch app wakes up from sleep
Upgrading from earlier versions
- 1.3.1: no actions needed after the app upgrade
- 1.3.0: after the app upgrade activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
- Earlier versions: the app closes itself after updating configuration file in first start after the upgrade. Restart the app.
New in version 1.3.0:
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
1.3.1
2023-01-09
Version 1.3.1: Error corrections
- Measurement name changed: “Heading GPS (M°|T°)” is renamed “Course (M°|T°)”.
- The calculated measurement “Course (°T)” is removed. Use the renamed “Course (°T)” measurement instead.
- The calculated measurement “Leeway” is changed to Course (°T) - Heading (°T).
Version 1.3.0:
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Upgrading from previous versions:
- Upgrading from version 1.3.0: To activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
- From earlier versions: The measurements configuration file has changed. In the first app start after upgrade an updated configuration file is recreated and the app needs to be restarted after it has closed itself. Selective logging and NMEA source filters are reset: if you have any measurements being logged or NMEA sources filtered re-enter these after the upgrade.
- Measurement name changed: “Heading GPS (M°|T°)” is renamed “Course (M°|T°)”.
- The calculated measurement “Course (°T)” is removed. Use the renamed “Course (°T)” measurement instead.
- The calculated measurement “Leeway” is changed to Course (°T) - Heading (°T).
Version 1.3.0:
- Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
- Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
- Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Upgrading from previous versions:
- Upgrading from version 1.3.0: To activate naming changes reset logging & filtering settings (before starting click Settings“ > “Log&Filter”>”Reset selective logging & filtering”).
- From earlier versions: The measurements configuration file has changed. In the first app start after upgrade an updated configuration file is recreated and the app needs to be restarted after it has closed itself. Selective logging and NMEA source filters are reset: if you have any measurements being logged or NMEA sources filtered re-enter these after the upgrade.
1.3.0
2023-01-02
(1) New data: Added new calculated measurement Course (°T - bearing from the location 10 seconds ago to current location) and new calculated measurement Leeway (° - the difference between actual Course and current true GPS heading °T)
(2) Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Upgrading from previous version: Due to adding the new measurements Course °T and Leeway ° the related configuration file has changed. In the first app start after version upgrade an updated configuration file is recreated and the app needs to be restarted after it has closed itself. Selective logging and NMEA source filters are reset: if you have any measurements being logged or NMEA sources filtered re-enter these after the upgrade.
(2) Connectivity: Support for UDP broadcast connectivity and watch connectivity via phone as Apple watchOS version 9 and later no longer allow connectivity between a watch app and external data source, such as NMEA Wi-Fi hotspot.
Usability: Enhanced Wind Widget compass rose: while more compact it contains more information and allows more space for digital data, especially on small displays. Watch’s units and other preferences are replaced by using data based on phone app’s preferences. Page information and command buttons remain always visible at the bottom of the screen. Minimum text size in Wind Display limited to 10 points regardless of device. Night mode background colour coverage extended to entire screen.
Robustness: Diagnostic logging option provides detailed app log files for addressing possible connectivity or data interpretation issues. Watch log file is available though the paired phone.
Upgrading from previous version: Due to adding the new measurements Course °T and Leeway ° the related configuration file has changed. In the first app start after version upgrade an updated configuration file is recreated and the app needs to be restarted after it has closed itself. Selective logging and NMEA source filters are reset: if you have any measurements being logged or NMEA sources filtered re-enter these after the upgrade.
1.2.2
2022-08-01
Support for ShipModul MiniPlex-3 series devices: receive and decode NMEA0183 sentences mixed with other data in incoming data packets. The non-NMEA0183 data is ignored.
1.2.1
2022-06-02
1.2.1:
- Faster user interface refresh: doubled from once per second to twice per second
- Corrected Raw Logging error: NMEA sentence checksum was missing from the raw log
- Faster user interface refresh: doubled from once per second to twice per second
- Corrected Raw Logging error: NMEA sentence checksum was missing from the raw log
1.2.0
2022-05-04
Enhanced time series display: adjustable size, time and value scales, support for negative series, such as XTE and apparent from from left and right, and settings persistency across sessions.
Short distances can use different units: for instance meters or feet instead on nautical miles.
Usability improvements.
Additional supported NMEA sentences.
Short distances can use different units: for instance meters or feet instead on nautical miles.
Usability improvements.
Additional supported NMEA sentences.
1.1.0
2022-01-08
Support for polars
- Polar tables management, including OCR Extended polar data, with support for multiple tables/sail configurations,
- Boat target speed for current wind angle and wind speed
- Current boat speed as percentage of Boat target speed
- Beat Angle: optimal wind angle for maximal VMG upwind at current true wind speed
- Gybe Angle: optimal wind angle for maximal VMG downwind at current true wind speed
- Beat VMG: target speed to wind at current wind speed
- Run VMG: target speed from wind at current wind speed
- Intermediate data for current wind and boat speeds are calculated through (bi)linear interpolation
Night mode
Settings user interface simplified
Synchronise install preferences from iPhone to paired iWatch
- Polar tables management, including OCR Extended polar data, with support for multiple tables/sail configurations,
- Boat target speed for current wind angle and wind speed
- Current boat speed as percentage of Boat target speed
- Beat Angle: optimal wind angle for maximal VMG upwind at current true wind speed
- Gybe Angle: optimal wind angle for maximal VMG downwind at current true wind speed
- Beat VMG: target speed to wind at current wind speed
- Run VMG: target speed from wind at current wind speed
- Intermediate data for current wind and boat speeds are calculated through (bi)linear interpolation
Night mode
Settings user interface simplified
Synchronise install preferences from iPhone to paired iWatch
1.0.1
2021-10-31
Error correction: data sharing between views.
1.0
2021-10-07
Способы взлома Display0183M
- Промо коды и коды погашений (Получить коды)
Скачать взломанный APK файл
Скачать Display0183M MOD APK
Запросить взлом
