FlockEye Взлом 2.05 + Чит Коды
Разработчик: UMIT CELEN
Категория: Фото и видео
Цена: 99,00 ₽ (Скачать бесплатно)
Версия: 2.05
ID: info.celen.flock
Скриншоты
Описание
FlockEye makes several iOS devices to take pictures or videos at the same time in instant take mode.
In that mode taken contents collected by host then host user can review and save the contents to photo library.
In auto take mode FlockEye takes photos indefinitely.
In that mode picture are being kept in FlockEye' s folder as long as there is a space in iPhone's disk.
While using this mode pictures could be taken via trigger chosen by user before start take.
Host can take pictures without any guest.
If there are guest iPhones connected to host, all flock members take pictures independently via a trigger.
Taken pictures stored in host with time and date and could be seen in a list to be saved to photo library or erased. If guest flock members lost connection with host, they keep taking pictures and save them theirs own storage. If disk becomes full when auto take was continuing, oldest picture is erased and recording goes on.
Date and time could be stamped on pictures if user choose that option.
To start using FlockEye as an instant taker.
Open FlockEye on the devices you would like to take picture with. Make sure bluetooth and Wifi is active on these devices. Choose one of devices as master and wait for the connections were established. When you saw red dot touch it to take pictures. But you might want to wait till all the slaves are connected. Now, wait while all the pictures are being received by master and that is it.
In that mode taken contents collected by host then host user can review and save the contents to photo library.
In auto take mode FlockEye takes photos indefinitely.
In that mode picture are being kept in FlockEye' s folder as long as there is a space in iPhone's disk.
While using this mode pictures could be taken via trigger chosen by user before start take.
Host can take pictures without any guest.
If there are guest iPhones connected to host, all flock members take pictures independently via a trigger.
Taken pictures stored in host with time and date and could be seen in a list to be saved to photo library or erased. If guest flock members lost connection with host, they keep taking pictures and save them theirs own storage. If disk becomes full when auto take was continuing, oldest picture is erased and recording goes on.
Date and time could be stamped on pictures if user choose that option.
To start using FlockEye as an instant taker.
Open FlockEye on the devices you would like to take picture with. Make sure bluetooth and Wifi is active on these devices. Choose one of devices as master and wait for the connections were established. When you saw red dot touch it to take pictures. But you might want to wait till all the slaves are connected. Now, wait while all the pictures are being received by master and that is it.
История обновлений
2.05
2021-09-09
We removed group photo ID option because of changes of Apple's programming features. It was causing errors because of changes.
We added ability sending taken images to photo albume automatically.
We added ability sending taken images to photo albume automatically.
2.04
2019-11-22
A bug has been removed causing a crash instead of warning the user for different versions of FlockEye connections.
2.03
2019-11-16
We made some user interface adjustments.
Also, we extended remote control ability.
Also, we extended remote control ability.
2.02
2019-07-22
What is new in this version?
Time trigger.
You can enter up to 10 times and at that times it takes a picture.
It works with instant take but could be more interesting with auto take.
Always bright option added for auto take.
In default mode, when auto take is activated screen dims to save energy.
If a picture has been taken it is gets bright briefly.
In case it is wanted, you can keep screen bright with this selection.
User can see that option when auto take selected.
Video recording with audio ability for instant take is added.
Now you can record video with audio if you would like to do so.
When user selects video this option will be presented.
We added an eagle button on the interface to make in app purchases.
Time trigger.
You can enter up to 10 times and at that times it takes a picture.
It works with instant take but could be more interesting with auto take.
Always bright option added for auto take.
In default mode, when auto take is activated screen dims to save energy.
If a picture has been taken it is gets bright briefly.
In case it is wanted, you can keep screen bright with this selection.
User can see that option when auto take selected.
Video recording with audio ability for instant take is added.
Now you can record video with audio if you would like to do so.
When user selects video this option will be presented.
We added an eagle button on the interface to make in app purchases.
2.01
2019-06-26
We added new trigger to take picture or video.
New trigger activates taking with audio noise level.
Also, we made some animations to show waiting time after every auto take, video recording progress and trigger readiness progress.
New trigger activates taking with audio noise level.
Also, we made some animations to show waiting time after every auto take, video recording progress and trigger readiness progress.
2.00
2019-06-02
We added, auto picture taking ability.
If you activate this option your device start to take pictures automatically after take command given with connected guest devices or as stand alone.
Auto take will be triggered by one of three triggers.
Timer.
Seen human face number.
Or motion in a selected area.
Unlike instant taking in this mode every device in flock will take picture independently and send the picture to host.
After auto take has been given by host to guest, if connection has been lost, guests continue taking pictures and save the taken picture their own disk.
Devices continue to record till application is closed or record stoped by user. If there is no free space in phone disk FlockEye erased oldest picture and keeps taking ne pictures.
Recorded pictures can be seen in a list by user later and copied or erase by user.
If you choose motion detection as trigger you would see a square on live video window.
That square where the motion detection will be done.
Pan your finger on live window to change its place on screen.
If you double tap on screen and pan you can change the size of the detection square.
Double tap again to change the placement.
When red frame of square is green it is ready for detection.
On graph window you can change sensitivity of detection if you pan your finger vertically.
If you activate this option your device start to take pictures automatically after take command given with connected guest devices or as stand alone.
Auto take will be triggered by one of three triggers.
Timer.
Seen human face number.
Or motion in a selected area.
Unlike instant taking in this mode every device in flock will take picture independently and send the picture to host.
After auto take has been given by host to guest, if connection has been lost, guests continue taking pictures and save the taken picture their own disk.
Devices continue to record till application is closed or record stoped by user. If there is no free space in phone disk FlockEye erased oldest picture and keeps taking ne pictures.
Recorded pictures can be seen in a list by user later and copied or erase by user.
If you choose motion detection as trigger you would see a square on live video window.
That square where the motion detection will be done.
Pan your finger on live window to change its place on screen.
If you double tap on screen and pan you can change the size of the detection square.
Double tap again to change the placement.
When red frame of square is green it is ready for detection.
On graph window you can change sensitivity of detection if you pan your finger vertically.
1.11
2019-01-17
We added two new things;
You can stream live video from one of guests to host.
Streaming guest's camera can be change from host.
Just touch connected guest button (blue dot with name under it) on host.
Then select what you want opened menu.
You can stream live video from one of guests to host.
Streaming guest's camera can be change from host.
Just touch connected guest button (blue dot with name under it) on host.
Then select what you want opened menu.
1.10
2018-11-06
A problem is making application unstable if user touch countdown has been removed.
1.9
2018-11-02
Flock name selection has been added. You can use default one or you can chose an other flock to take a video or picture with in case there are too many flockEye user around.
You can change flock name by touching ID button.
An animation consuming unnecessarily high energy while flockEye waiting to connect to a peer is replaced.
You can change flock name by touching ID button.
An animation consuming unnecessarily high energy while flockEye waiting to connect to a peer is replaced.
1.8
2018-10-09
Some minor interface adjustments have been done and a discovered bug has been removed.
Just to remind, you need at least two iPhones to use this application.
Just to remind, you need at least two iPhones to use this application.
1.7
2018-07-09
Please use the same version on all devices.
We added two functions to start take action.
Timer and face counting on master's camera.
You can set timer and face numbers to start those functions.
You set them 0 to disable to disable those functions.
Now you can start taking with four ways.
By touching take button directly.
Touching button and waiting timer to expire.
Waiting faces which numbers has been set appear on master camera.
Or wait timer after faces has been reached to set number.
For all those options to start just touch red button.
We added two functions to start take action.
Timer and face counting on master's camera.
You can set timer and face numbers to start those functions.
You set them 0 to disable to disable those functions.
Now you can start taking with four ways.
By touching take button directly.
Touching button and waiting timer to expire.
Waiting faces which numbers has been set appear on master camera.
Or wait timer after faces has been reached to set number.
For all those options to start just touch red button.
1.6
2018-05-29
A better picture taking resolution option is added.
Video taking feature is created. Now, you can take simultaneous video with flock.
In video setup you can select how long the video would be.
Focus type and torch control is included.
Some improvements has been done for interface.
All the FlockEye applications used must be the same version.
Video taking feature is created. Now, you can take simultaneous video with flock.
In video setup you can select how long the video would be.
Focus type and torch control is included.
Some improvements has been done for interface.
All the FlockEye applications used must be the same version.
1.5
2017-10-24
It is able to select any camera on your device and can work on iOS11.
1.4
2017-05-11
Higher resolution option has been added.
Discovered bugs are cleaned.
Discovered bugs are cleaned.
1.3
2016-12-22
Slave torch control via master. When slave dot is blue touch it to turn on or off the slave's torch.
Connected slave name showing.
New iOS version compatibility.
Connected slave name showing.
New iOS version compatibility.
1.2
2016-04-30
We made needed adjustments to make it run on new iOS versions.
1.0
2015-02-26
Чит Коды на бесплатные встроенные покупки
| Покупка | Цена | iPhone/iPad | Андроид |
|---|---|---|---|
| FlockEye AutoTake (Lets your phone takes photos own its own.) |
Free |
CI047826710✱✱✱✱✱ | 614F0F7✱✱✱✱✱ |
Способы взлома FlockEye
- Промо коды и коды погашений (Получить коды)
Скачать взломанный APK файл
Скачать FlockEye MOD APK
Запросить взлом
