Foscam Pro: Multi IP Camera Viewer Читы

Foscam Pro: Multi IP Camera Viewer Взлом 3.911 + Чит Коды

Разработчик: Synaptic Edge LLC
Категория: Утилиты
Цена: 449,00 ₽ (Скачать бесплатно)
Версия: 3.911
ID: net.logicapplications.foscamprowaudio

Скриншоты

Game screenshot Foscam Pro: Multi IP Camera Viewer mod apkGame screenshot Foscam Pro: Multi IP Camera Viewer apkGame screenshot Foscam Pro: Multi IP Camera Viewer hack

Описание

The app Foscam Pro is the most feature rich Foscam iPhone app and iPad app to take advantage of your Foscam IP cameras both HD and SD, as well as other MJPEG cameras. Alll the features you want and need are in one place. For almost all Foscam HD and SD cameras there is two-way audio, video recording, and image capture.

Note: Foscam Pro is not made by or affiliated with Shenzhen Foscam Intelligent Technology. Please do not contact us with camera hardware problems. Thank you.

Compatible cameras WITH two-way audio where supported: FI8905W, FI8908W, FI8909W, FI8910W, FI8916W, FI8918W, C1, FI9803P V2, FI9804P, FI9805, FI9805W, FI9816P, FI9821P, FI9821P V2, FI9821W, FI9821W V2, FI9821W V2.1, FI9826P V2, FI9826W, FI9828P, FI9828W, FI9831P+V2, FI9853EP, FI9900P, FosBaby, FosBaby P1 , C2, R2, and Insteon 2864-232.

Compatible cameras WITHOUT audio: Foscam FI9821V1, FI8620, FI8608, Cis-co WVC-80N, D-Link DCS-942L, Agassio 522, Panasonic CL0230, and the WowWee Rovio robot.

Other cameras might work but it is not guaranteed; choose a camera in the settings that looks similar. If you find cameras that are compatible, please let us know and we will add them to this list.

To view your cameras remotely, you will have to setup dynamic DNS and/or port forwarding on your home router. Get your camera working with your browser first. Then setup the app.
See this page for help: http://synapticedge.com/setupfoscam

Need help? Tap the info button to contact us.
Please contact your camera reseller for support with your initial setup.

Current Feature Summary:
▶Preset camera position control
▶Two-way Audio on compatible models (see list above)
▶Listen to multiple cameras at the same time
▶Listen to camera audio while the app is in the background
▶Adjustable camera arrangement
▶Up to four camera groups
▶Live settings feedback
▶2 Control Methods ("No look" Joystick or Screen Drag)
▶Control of your camera's motion detection, ftp upload, and email and SD features (as applicable based on camera models)
▶Pan and Tilt Speed Control
▶In App motion and face detection (with automatic image/video capture) for SD model cameras.
▶Video Recording to camera roll (with audio on compatible models)
▶Optional Passcode Lock
▶Fast multiple camera setup
▶Save/e-mail your camera settings to other users/devices

The "no look" joystick allows you to look at the camera image while positioning the camera instead of needing to look at some tiny arrow buttons. Simple tap and hold anywhere near the joystick. The joystick will center on your finger. Then just drag in the direction you want to go.

Push to talk makes talking through your camera easy. Simply hold the microphone button to talk and release to stop.

Take pictures and videos with ease. Videos and images are captured instantly without interference, popups, or waiting. Images and videos are sent directly to your camera roll. You can email or upload them to YouTube from there.

Fast, easy setup: Most people with multiple cameras have them setup with similar network settings, often only the port number is different. With Foscam Pro’s duplicate feature, setting up multiple cameras takes only a few seconds. Username and passwords can now be set up as defaults for new cameras.

Setting up the same cameras on multiple devices? Foscam Pro allows you to e-mail your camera settings to yourself, coworkers, family or friends. Passwords are no longer included in the configuration file.

Additionally, Foscam Pro allows you to use local addresses for when you are on the same network as the cameras, and remote addresses for when you are away from the home location. This allows you to get the best connection no matter where you are.

Want to save bandwidth? Foscam Pro has three bandwidth saving modes to choose from for 89xx series models.

Foscam Pro is a universal app. This means it is a Foscam iPhone app, a Foscam iPad app, and a Foscam iPod app. You only have to buy it once.

История обновлений

3.911
2015-11-12
This app has been updated by Apple to display the Apple Watch app icon.

-Increased image processing speed for HD Foscam cameras.
-Fixed zoom for HD Foscam cameras.
-Fixed audio transmit for SD Foscam cameras.
-Fixed button overlapping problem for effecting some models of iPads.

If you enjoy Foscam Pro, please help set us apart amongst the Foscam iPhone apps and Foscam iPad apps by leaving a review after each update. Thank you.
3.910
2015-11-03
Our biggest update in a while. Big thank you to our many beta testers for their support over the last few weeks.

Added full auto-detected support (pan, tilt, zoom, two-way audio, multi camera audio for audio capable cameras) for Foscam C1, FI9803P V2, FI9804P, FI9805, FI9805W, FI9816P, FI9821P, FI9821P V2, FI9821W, FI9821W V2, FI9821W V2.1, FI9826P V2, FI9826W, FI9828P, FI9828W, FI9831P+V2, FI9853EP, FI9900P, FosBaby, FosBaby P1 , C2, R2, and Insteon 2864-232.

Just use the single "HD Foscams" model selection from the edit camera menu for all the listed cameras above.

If you have it working with other models, please let us know so we can add them to the list.

-Allows other app audio to run while viewing Foscam Pro.

-Allows audio from other apps to run in background while you monitor your cameras.

-QRCode Scanning (iOS7 and above) and setup for compatible FI98xx, FI99xx, and C1,C2,and R2 cameras.
(WARNING: P2P connections from the QRCode are dependent on servers outside of our control and can be slow at times. We recommend manually configuring remote connections.)
3.8
2015-08-19
In preparation for iOS 9 and the 3.910 version of Foscam Pro.
-Increased image processing speed.
-Moved Camera Log button away from contrast slider to prevent inadvertent contact.
-Increased password length acceptance.

Sorry for the delay in the updates. We have been restructuring our company.

Next version will offer increased camera compatibility for 98xx series Foscam cameras. Should have two way audio and full HD support. We are working as fast as we can. Thank you for your patience.
3.7
2015-08-18
In preparation for iOS 9 and the 4.0 version of Foscam Pro.
-Increased image processing speed.
-Moved Camera Log button away from contrast slider to prevent inadvertent contact.
-Increased password length acceptance.

Sorry for the delay in the updates. We have been restructuring our company.

Next version will offer increased camera compatibility for 98xx series Foscam cameras. Should have two way audio and full HD support. We are working as fast as we can. Thank you for your patience.
3.6
2013-12-02
-Fixed problem where the Live Camera Settings (Brightness, Contrast, etc) settings were disabled on Foscam MJPEG models.
—Live Camera Settings, now are updated live if another camera user changes the settings
—Live Camera Settings now show has settings for flicker reduction (50Hz, 60Hz, and Outdoor)
—Live Camera Settings can now show camera activity log if you are an administrator
-Added customer requested zoom control option for MJPEG models with optical zoom (Thanks Maurice)
-Activity Flasher now starts gray
-Improved audio handling
-Added audio buffer setting. A smaller buffer setting will decrease the audio delay, but can possibly have more pops, clicks, or silence depending on the quality of the camera and device connections. A larger buffer increases the audio delay, but will have less or no pops, clicks, or silence.
-Changed bandwidth saver settings. All preset modes use 640x480 and only change the FPS. Custom modes can still be used to change the resolution. Had to do this because not everyone read the pop-up messages explaining the bandwidth saver and some thought the app was causing their resolution to be low. It was. They just didn’t know they could change it.
-Bandwidth saver off mode now doesn’t set any any resolution or fps settings. Previously it was forcing max framerate and max resolution. If another user changes the resolution, it will change for you too.
-Increased stability and error handling.
-Shake to refresh added to group thumbnail view. Shaking the device will cause all cameras in the group to refresh their connection.
-Added customer requested url schema to open the app from other apps . (foscampro://) Follow it with a,b,c,d, or x to open specific groups. (Thanks Travis)
-When resumed while listening to audio in the background, bandwidth saver settings are applied on re-opening
3.5
2013-11-20
-Fixed connection problems and crashes with some cameras
-Fixed e-mail camera settings file action not sending settings file.
-Fixed problem on various devices where the app settings were not saving
-Increased audio stability
-Fixed problem where audio was played back late when reselecting the speaker
-Fixed talk audio volume variability
-Fixed problem with audio backgrounding setting not taking effect
-Fixed problem with bluetooth option not taking effect
-Now reconnects after camera power failure and attempts to restore audio if audio was playing
-Now reconnects after network outages and attempts to restore audio if audio was playing
-Now has activity flasher showing connectivity status (if its not blinking, its not working)
-Now remembers audio state of single camera, if returning to camera it will be where you left it
-Audio turns off when returning to the main mosaic thumbnail view
3.4
2013-11-09
Sorry for the continued problems and thank you for your patience in sticking with us while we get the problems resolved. Currently there is a problem where the app will not connect to cameras that don't respond within the app's current timeouts. An update has been submitted to Apple, and we hope it is approved soon.
-Thanks for the good reviews from those who the app is working well for. They support continued development.
-Leaving bad reviews before contacting us will not help get the problems fixed, please contact us with any issues via the in-app contact button. Many of the bad reviews have contained problems that can be fixed with setting changes. Like resolution problems and remote addresses that don't work.

-Remote addresses should connect again.
-Multi-camera views should connect again… let us know if it’s not working for you.
-Fixed bug in the Camera Settings that was showing “Bad username/password” for lower level (non-administrator) accounts.
-Fixed reverse horizontal/vertical control settings.
-Latent images now removed when app is shut down.
-Fixed send button not showing up on support e-mail on some devices.
-App Settings pane is now three panes… swipe left right for more settings.
-Added camera discovery. You can now select camera’s from a list of discovered camera’s on the local network.
-Added custom bandwidth saver mode.
-Bandwidth saver now has two modes, WiFi and Cellular
—The app will now automatically switch between bandwidth saver settings based on the connection you are currently on.
-Changed Bandwidth Saver so that it change camera FPS. This greatly reduces bandwidth usage without too much visual change. FPS has more of an effect on bandwidth than resolution.
-Added instructions to Camera Settings.
-Added instructions to App Settings.
3.3
2013-11-06
-Bluetooth now disabled by default, go to app settings to turn back on.
-Connections to multiple cameras should work better now.
-Single cameras that weren’t displaying video, should work now.
-Added option for extending timeout for cameras with poor connections.
-Fixed option for screen drag controls where the control had no effect.
-Live connection checker in camera settings now works properly for 89XX cameras with MD5 authentication.
-Audio now turns off when moving from single camera view to multi camera view.
3.1
2013-10-28
We sincerely apologize for the bugs in the last update. We hope we have eliminated them.

If you find any bugs in this version, please let us know through the contact support button in the app and we will fix them as soon as possible.
Also please update your reviews if you left a bad one. If you like the app and want further updates, please leave us a great review if you like the app.

Massive bug fixes.
-Swipe to patrol has been removed after mass outrage.
-Local Address IP verification removed. You can now put a URL in the local address field as well such as a Bonjour address.
-Fixed problem that may have prevented bluetooth headsets from connecting.
-

Re-ADDED:
Image drag to control camera.
Mute camera audio when using microphone.

ADDED:
MD5 authentication for new 89XX firmware.
Increased Microphone Gain
Option to sync audio with video. Turning off sync will makes audio near real time. It will arrive before the images.
Refresh button restores audio state.

CHANGED:
89XX series Bandwidth Saver now adjusts resolution only. Higher setting can increase battery life as well.

UPDATED:
Connection checker/switcher error handling.
Camera reconnection methods.
All audio handling.
3.0
2013-10-24
READ: There is a bug in the current update where your camera may show connected but with a gray screen. As a temporary fix, go to the app settings and turn on low, medium or high bandwidth saver mode. We will fix the bug soon.

Thank you for your patience. Future updates should happen at a much faster rate.
Please leave us a 5 star review if you enjoy the app. Great reviews help our sales and keep us motivated.
If you find a problem with the app, please contact us via the app and let us know what to improve.

-Preliminary (no audio) support for FI9805W, FI9821W, FI8620, Cis-co , D-Link, Agassio 522, Panasonic CL0230, and the WowWee Rovio robot.
-Swipe Up/Down or Left/Right to patrol if camera supports patrol
-Added low pass filter on audio that removes some noise.
-Presets and joystick now visible at same time.
-When returning to app after closing it no longer restarts at multi-camera view. It comes back where you left it.
-New app icon and updated look.
-Multi camera audio. Listen to two+ cameras at once.
-Video recordings now have audio.
-You can now separate cameras in up to four groups. Edit the individual camera and select group A,B,C or D.
-Audio backgrounding is now optional.
-Live connection feedback when setting up camera addresses.
-Fixed bug that may have muted system sounds after closing app.
-Fixed bug that might have been causing video recordings to not save on certain devices.
-Fixed bug where presets were one off where they should have been.
-Fixed bug that was causing app to crash when using remote port 80.
-Increased camera audio stability and buffering.
-Added support for bluetooth headsets.
-Added ability to refresh camera images.
-Added ability to re-arrange cameras. Just tap and hold, then drag camera to new location.
-Added alerts for iPhone/iPad privacy settings that impede audio or image capture functions.
-If Joystick used during "In App motion or face detection" will prevent triggering events.
-Reduced memory usage
-Reduced CPU usage
2.0
2012-05-03
Hi,

Summary: Stability, presets, camera motion detection, audio backgrounding, In app motion and face detection (iOS 5+), motion and face following, pan and tilt speed, automatic image/video capture on face/motion detection, and more.

Thanks for reading about our update. If you like the app and the update, please leave us a glowing, ecstatic 5 star review. Great reviews help sales and increase our motivation to improve the app even more. I also don't want to include that annoying popup that asks for reviews. If you have any problems setting up, please contact us through the "Contact Support" button in the info menu.

Camera setup now allows blank passwords.
In multi camera view, cameras no longer time out, they just keep trying to connect.

Improved app stability.
Enhanced audio reception. (less pops and clicks)
Decreased bandwidth usage.
Increased initial connection speed.
Remembers audio on/off state per camera.

Added a screwdriver button...
-Added ability to turn on and off Foscam camera motion detection, e-mail alerts, ftp upload and upload rate, motion compensation, and scheduler usage.
-Added ability to turn on and off that annoying blinking green LED light.
-Added ability to adjust pan and tilt speed for capable cameras.
-Added ability to background the audio. Just press the home button while listening to audio. This pauses the video stream and saves tons of bandwidth, running at about 17 megabytes per hour.
-Added ability to turn preset position capability on and off.
-Added better error messages.
-Prevented crash when connected to something other than camera.

We added "In App" motion detection while viewing single cameras.
Also added "In App" face detection (for iOS 5.0 and above).

With both the in-app motion and face detection, you can set it to sound an alarm, take a picture, take a 10 second video, or take a 60 second video.

Just for fun we added a motion or face following feature for cameras with Pan and Tilt capability. We recommend using this feature with your pan and tilt speed set to less than half of full speed. When something is moving in front of the camera, the camera will attempt to center on it.

Added a preset button
-Added ability to use preset positions, just press the location (preset) icon. Tap to go, Hold to set. (like car radio presets).

Thanks for using Foscam Pro.

-John
1.0
2012-03-26

Скачать Foscam Pro: Multi IP Camera Viewer на iPhone и Андроид бесплатно

Скачать на Андроид

Способы взлома Foscam Pro: Multi IP Camera Viewer

Скачать взломанный APK файл

Скачать Foscam Pro: Multi IP Camera Viewer MOD APK
Запросить взлом

Рейтинг

4.5 из 5
2 Голосов

Отзывы

Gelota,
No sound
Please fix the sound support.
Санёк 1,
👍
Прграмма 👍 . Только где звук с камеры? 😉
Serhio 25,
Ip cam
Приложение не поддерживает камеры видеопотока H264 :((
Т. Ч. Пришлось перейти на другое приложение... Можно было бы и сделать доработку!