Garmin GTN Trainer Взлом 6.72.0 + Чит Коды

Updated to align with v6.72 airborne software. Minor simulation bug fixes.

Added FliteCharts for all of North America.

Bug fixes and improvements.

Updated to software version 6.62
Added support for:
• Enroute Vertical Navigation
• Along-track offsets in the flight plan
• New coordinate systems
• QWERTY and ABC keyboard formats
• Additional FIS-B products

Updated NEXRAD "No Coverage" overlay to be semi-transparent.
Updated the Fuel Planning and Trip Planning utility pages to use present position along the active leg.

The GTN 650/750 iOS Trainer has been updated to GTN 650/750 software version 6.41. This new software update includes the following new capabilities:


Visual approach guidance

Visual approach guidance is now available within the GTN 650/750, which provides advisory vertical guidance in visual flight conditions based on a published glide path angle or a three-degree glideslope from the threshold of the runway, while considering terrain and obstacle clearance. When selecting a visual approach, pilots can choose the runway of intended landing and select vectors for the final approach intercept to assist them in flying a stabilized approach. When a flight plan is loaded, the GTN will also provide a shortcut to optionally load and activate a visual approach when the aircraft is within 5 miles of the destination airport if an approach is not already selected. By utilizing visual approach guidance within the GTN, pilots are provided a more stable descent and precise flight path throughout the approach and landing phases of flight while operating in visual conditions.


LNAV+V approaches without WAAS/SBAS

Pilots operating into airports throughout the world that are not served by WAAS/SBAS can now receive advisory vertical guidance (LNAV+V) while flying LNAV approaches with the GTN 650/750. By taking advantage of the advisory glideslope offered by the GTN, pilots can more easily fly a stabilized descent while flying LNAV approaches.


On-screen flight controls

On-screen flight controls are now available for the GTN 650/750 iOS Trainer, providing easy access to the most commonly used flight controls of airspeed, altitude and heading. These controls supplement the existing demo menu options and offer an intuitive way to “fly” the simulated aircraft. Pilots can change between manual and flight plan track modes on the fly, simulating either manual flight or an autopilot-like experience, respectively.


New configuration options

The GTN 650/750 iOS Trainer now allows pilots to select between fixed-wing and rotorcraft airframe simulations. Additionally, the GTN 650/750 iOS Trainer’s terrain configuration has been upgraded to enable TAWS-B and HTAWS demonstrations based on which airframe the pilot has selected.

· Adds support for Garmin Navigation Database (North America) as new default. Jeppesen Worldwide database still available from the Trainer settings menu.
· Provides “Show Touches” setting to enhance presentations on a separate display.

Airway exits can now be selected on 64bit devices.
Phase of Flight indicator now follows the rules.
Simulated satellites have returned to the GPS Status page.
Fixed some issues with nearest airspaces appearing incorrectly.
Fixed some issues with the nearest FSS list.

Updated to GTN software version 6.01, added new training data and much more!

Fixes intermittent issue where app may crash on start-up

Support for free 30-day trial

** Important Release - Please update in order to ensure your license is valid for future releases. **

- Support for upcoming releases
- Bug Fixes
- Optimizations

Trainer now uses GTN 3.0 software.

Note: To switch between 650 and 750, go into your iPad Settings -> GTN Trainer.

Version 1.1.1 includes support for the GTN 650.

To change devices, go into iPad Settings->GTN Trainer.