iFMS Взлом 3.0.3

Скриншоты

Описание

Make your Flight Simulator experience a more realistic one.
iFMS will provide you with a nearly fully functional "Boeing style" Flight Management System, A Primary Flight Display, Navigation Display and a number of 2 or 4 engine EICAS displays on your iPhone, iPad or iPod.

Build your very own home cockpit using only a few mobile devices and connect to any of the popular Flight Simulators over your local network.
iFMS can be configured for use with almost any of your favorite Flight Simulator's standard or add-on aircraft.
A number of default aircraft configuration files are included but you can easily make your own and download them to your iFMS through iTunes.

The FMS display and functionality simulates the "Boeing style" Flight Management System accurately.
Apart from all the standard flight planning and tracking functionality, all the more complex functions such as hold programming, custom waypoint programming by coordinates, heading/distance calculation or waypoints radial/intersection calculation and abeam route waypoint calculations are available as well, along with much, much more.

iFMS also includes an LNAV/VNAV engine which will control your aircraft's autopilot to fly the programmed LNAV/VNAV route.

iFMS uses Wi-Fi to connect to your favorite Flight Simulator over your local network, alternatively iFMS can also use the device GPS (if present) as a data source, you can be a passenger in the car and practice your FMS programming skills. Be aware though, iFMS cannot be used for real world aviation navigation as this is strictly against the terms of use of this product.

iFMS can be configured for use with almost any of your favorite Flight Simulator's standard aircraft and most add-on aircraft, a number of default aircraft are included but you can easily make your own on your computer and transfer them to iFMS through iTunes.

Features summary:

- Realistic Flight Planning/Tracking/Navigation
- Boeing style Flight Management System
- Boeing style Primary Flight Display
- Boeing style HSI or NAV Display
- Various 2 or 4 engine EICAS Displays
- LNAV & VNAV calculation and MCP programming
- LNAV/VNAV engine to control the aircraft autopilot
- Configurable aircraft
- Use your own created aircraft files
- Loading and saving of flight plans
- Compatible with Apple iPhone, iPod and iPad
- Single portrait or side by side landscape view
- Updatable navdata through Navigraph

Compatibility:

FMS will run on the following devices:
- iPad (3rd generation or later)
- iPad Mini/Air/Pro
- iPhone (4th generation or later)
- iPod Touch (4th generation or later)

iFMS is compatible to run with:
- Microsoft Flight Simulator 9 (using FSUIPC)
- Microsoft Flight Simulator X
- Prepar3D 2.X
- Prepar3D 3.X
- Prepar3D 4.X
- X-Plane (Windows and OSX)

- Stand-alone (GPS driven)

Please visit http://www.ifms-fs.com for more details about iFMS, supported flight simulator packages and how to connect iFMS to them.

История обновлений

3.0.3

2020-05-08

- Fixed network stability issue when using multiple devices
- Added support for older aircraft configuration files
- Fixed altitude tape drawing issue

3.0.2

2020-04-24

- Fixed application stability issues when using multiple devices
- Fixed track drawing issue in MFD
- Fixed crash on HOLD page

3.0.1

2020-04-18

- Reintroduced support for older devices such as the iPhone 4(S) or iPad 3rd Generation
- Additional memory conservation
- Fixed network connection issue on some devices
- Fixed issue with drawing holding patterns in MFD

3.0.0

2020-04-06

- Brand new more realistic FMC
- EGPWS capcability
- Terrain view on MFD
- Map and Plan centered modes
- LNAV and VNAV performance inprovements
- Allowance for latest navigraph data updates (no size limitations)

2.1.0

2017-06-29

- Option to switch between classic and modern FMC layout (CLB/CRZ/DES buttons or single VNAV button)
- Switch between classic brown (747/757/767/777), or grey (737) FMC background color
- NAV/RAD FMC page

2.0.0

2016-04-07

This latest release transforms what was already a great product into something spectacular.

Apart from the original functionality, which consisted of a “Boeing style” Flight Management System, a Navigation Display and an LNAV/VNAV engine; iFMS now also incorporates a Primary Flight Display, various EICAS displays accommodating both twin and four engine aircraft, and a fully functional MCP module.

On top of that iFMS now supports multiple devices being connected to a single flight simulator.
This means you can program the FMC on one device and all other devices connected to the same flight simulator will sync and display the programmed route and all associated information.

With the addition of the features above iFMS can be used to build relatively cheap, simple, but nevertheless, very realistic, “Boeing style” home cockpit.
All flight flight information can now be displayed on as little as 2 or 3 tablets and/or phones, which means your flight simulator computer screen(s) can be fully used to display the outside view.
For example, a simple setup could consist of:
- a Tablet in front in Landscape mode displaying the PFD and NAV displays side by side,
- a second tablet to the right in portrait mode displaying the primary and seconday EICAS displays on top of each other
- a third smaller tablet or phone (configured as Master) positioned within arm’s reach beside the pilot displaying the FMC/MCP module.

Of course iFMS can still be used in its original form where only a single device is used to display the FMC screen and/or the NAV display.

As before, iFMS can be configured for use with almost any of your favorite Flight Simulator's standard or add-on aircraft, a number of default aircraft are included but you can easily make your own and download them to your iFMS through iTunes.

1.1.7

2014-11-08

A connection timeout issue that occurred on some configurations was resolved.

1.1.5

2014-09-18

- iOS 8 Compatibility issues resolved
- Added HSI active waypoint information
- Added HSI GS / TAS information
- Added HSI wind information
- Crash resolved in LEGS pages
- Crash resolved in LOAD FLIGHT PLAN pages

1.1.4

2013-09-18

This revision fixes the following issues:
- Waypoint names should always be displayed when the HSI is in PLAN mode, not just when RTE DATA is selected.
- When a runway is selected in some cases there was a problem only displaying the relevant departures/arrivals for this runway.
- There was a crash and/or misplacement when programming a hold in an existing procedure.
- When the HSI was in plan mode in landscape configuration, trying to program a hold, the “STEP” function was overwritten by the “PPOS” function.
- Take-off status would only show complete after PERF INIT / ROUTE / TAKEOFF PAGE was complete and a departure runway was selected, in reality the departure runway does not need to be selected for take-off status to show as complete.

Two less common aircraft were also added to the list of default aircraft, the AgustaWestland AW139 Helicopter and the Cessna C337H Skymaster.

1.1.0

2013-08-29

A much desired feature that is now included is the LNAV/VNAV engine.
Apart from using iFMS for flight planning/tracking/navigation, with this new engine iFMS is now also capable of controlling the aircraft's autopilot to fly the programmed LNAV/VNAV route.

This release also comes with 6 default aircraft configuration files, a 737-800, 747-400, 757-200, 767-300ER, 777-200LR and a PA-28, but you can easily create your own following the tutorial and examples available on the iFMS website so iFMS can be used with almost any flight simulator standard and most add-on aircraft.

1.0.2

2013-08-04

- Missing “Along Track” waypoint functionality was added.
- Missing above/below speed and altitude restrictions were added.
- More accurate VNAV calculation.
- Added Top-Of-Climb and Top-Of-Descent markers in HSI display.
- Fixed an issue with approach transitions.
- Fixed a problem where selected departures/arrivals statuses would not change from “SEL” to “ACT” upon execution.

1.0.1

2013-07-08

- A specific problem STAR transitions was fixed.
- A more general problem with all procedures was fixed.
- HSI graphics were significantly improved.
- All bitmap fonts were replaced with sharper versions.
- The FMC background bitmap and button bitmaps were replaced with sharper versions.
- All devices now use the same set of FMC bitmaps.

1.0.0

2013-06-14