Pocket CLI Взлом 1.90 + Чит Коды

Bug fixes - design save issue

Bug fixes

iOS 15 fix

added switch global config commands:
errdisable recovery cause psecure-violation
no errdisable recovery cause all
no errdisable recovery cause psecure-violation
errdisable recovery interval [30-86400]
no errdisable recovery interval

added priviledge command:
show errdisable recovery
show etherchannel
show etherchannel summary

updated L2 etherchannel logic
misc. updates and fixes

added support for global configuration command:
aaa authentication login default group radius

added radius setup commands on host:
set radius key WORD
set radius user WORD password WORD
show radius

added encryption on configuration for radius-server key
layer3 logic optimization
miscellaneous fixes and improvements

added CCNP configuration commands:
aaa authentication login default
- with login combo: line, enable, local, and none
no aaa authentication login default

added CCNP line commands:
login authentication WORD
login authentication default
no login authentication

fixed privilege level issue on remote sessions
fixed external keyboard display
updated disconnected devices checker on design save
preparation work for radius aaa login

Added CCNA Security commands:

global config commands:
enable password level [1-15] WORD
enable secret level [1-15] WORD

console commands:
login local
no login local
privilege level [0-15]
no privilege level

added vty line commands:
login local
no login local

added configuration command:
username WORD privilege [0-15]
username WORD privilege [0-15] password WORD

added verification command:
show privilege

added user and privilege commands:
NOTE: Commands are not available when remotely connected (e.g. telnet)

disable [0-15]
enable [0-15]

updated telnet process for login local
updated enable command process
updated console login process
other misc. fixes and improvements

New for CCNP Switching:

Added ACL commands to the switch.
Added support for vlan filtering and vlan access-map.

Configuration commands added:
vlan filter WORD vlan-list [1-199]
no vlan filter WORD vlan-list [1-199]
vlan access-map WORD
vlan access-map WORD [1-199]
no vlan access-map WORD
no vlan access-map WORD [1-199]

Access-map configuration commands:
match ip address WORD
match ip address [1-199]
action drop
action forward

New verification commands:
show vlan access-map
show vlan filter

Layer 2 logic optimization and other miscellaneous fixes/improvements.
iPad anchoring fixed and started preparations for Radius Server service on the host.
Added iPad previews.

New for CCNP Switching:

Added ACL commands to the switch.
Added support for vlan filtering and vlan access-map.

Configuration commands added:
vlan filter WORD vlan-list [1-199]
no vlan filter WORD vlan-list [1-199]
vlan access-map WORD
vlan access-map WORD [1-199]
no vlan access-map WORD
no vlan access-map WORD [1-199]

Access-map configuration commands:
match ip address WORD
match ip address [1-199]
action drop
action forward

New verification commands:
show vlan access-map
show vlan filter

Layer 2 logic optimization and other miscellaneous fixes/improvements.

Fixed console display issue found on iOS version 12.0.
Renamed the App.
Improved text substitution process.
Other performance improvements.

Fixed console display issue found after iOS 11.4 update

CCNP virtual-link support added

new commands:

area [0-4294967295] virtual-link A.B.C.D
no area [0-4294967295] virtual-link A.B.C.D

Update to fix iOS 11 issues

EIGRPv3 support added

added binary game challenge under tools

updated network topology when a configured device is rebooted
updated switchport encapsulation checking
updated switchport port-security violation process

fixed IPv6 addresses expansion
fixed intermittent crash from routing table update process

Big update with lots of improvement. We added new supported commands and features.

added privileged commands:
show ip dhcp pool
release dhcp fastethernet PORT/PORT
release dhcp serial PORT/PORT
renew dhcp fastethernet PORT/PORT
renew dhcp serial PORT/PORT


added router interface commands:
vrrp [1-255] ip A.B.C.D
vrrp [1-255] preempt
vrrp [1-255] preempt delay minimum [0-3600]
vrrp [1-255] priority [0-255]
no vrrp [1-255] ip A.B.C.D
no vrrp [1-255] preempt
no vrrp [1-255] preempt delay minimum [0-3600]
no vrrp [1-255] priority [0-255]
vrrp [1-255] track [1-500]
no vrrp [1-255]
no vrrp [1-255] track [1-500]
vrrp [1-255] track [1-500] decrement [1-255]
no vrrp [1-255] track [1-500] decrement [1-255]

improved layer 2 & layer3 path finding logic
improved DHCP address assignment speed
improved routing table update routine
improved switchport status checking
added multiple invalid entry checks and messages
added network and broadcast address checks when setting interface ip address
added lab alert for possible ip address conflict
added IPv6 address to the topology view if IPv4 is not configured


updated subinterface mac address
updated ip route and ipv6 route display
updated cisco device ping result: Sending 5 ICMP Echoes
updated ping and traceroute results for bad IP or hostname
updated resutls for: show ip dhcp server statistics
updated traceroute to use the real IP instead of HSRP/VRRP virtual address
updated hsrp mac address to hex of standby group

subinterfaces are now included in the routing protocol process

design save warns for disconnected devices or multiple networks in the lab

fixed number range checking
leading zeros on type numbers removed
ospf no longer takes 0.0.0.0 as router-id
fixed configuration issue when setting a loopback address with 255.255.255.255 mask
fixed ospf path finding
fixed app crash issue with command: show ip protocols
fixed design issue where port labels are not removed when removing a connection

expanded network design area

added privileged command:
show track

added router global commands:
track [1-500] interface fastethernet PORT/PORT line-protocol
track [1-500] interface serial PORT/PORT line-protocol
track [1-500] ip route A.B.C.D A.B.C.D reachability

updated show ip route results:
directly connected networks are not shown when port is down
static routes are not shown when outgoing port line is down or when next hop does not exist

added EIGRP and OSPF support for tunnels

updated EIGRP and OSPF to accept both subnet masks and wildcards during network configuration

added command and display result: show interfaces tunnel [0-2147483647]

updated autocomplete and other minor updates

CCNP feature added: support for multi-area OSPF


added general settings:
EIGRP auto-summary switch (default settings for auto-summary on a new EIGRP AS)


added priviledged command:
show ip ospf interface


added router interface commands:
ip ospf priority [0-255]
no ip ospf priority


added filters for the show ip route command:
show ip route connected
show ip route eigrp
show ip route rip
show ip route ospf
show ip route static


added switch interface commands:
no switchport port-security mac-address sticky
no switchport port-security mac-address H.H.H


updated ospf DR & BDR process
updated router ospf command process: router-id A.B.C.D
updated results for show ip ospf interface
updated show ip protocol (OSPF results)
updated results for show ip ospf neighbor


fixed switchport port-security mac-address sticky command issue

added Layer 3 switching feature for the Cisco switch

added layer 3 switch image when L3 is activated using the ip routing command

updated L3 logic to handle layer 3 switching

added static route support for the L3 switch

added switch privileged command: show port-security address

added interface commands:
ip summary-address eigrp [1-65535] A.B.C.D A.B.C.D
no ip summary-address eigrp [1-65535] A.B.C.D A.B.C.D

added router rip command:
no version

added router eigrp commands:
auto-summary
no auto-summary

updated show start & run to display:
no-autosummary
ip routes on L3 switches

updated rip & eigrp dynamic routing logic

updated show ip protocols results for RIP and EIGRP

fixed commands:
show port-security interface fastethernet PORT/PORT
show port-security interface gigabitethernet PORT/PORT
switchport port-security mac-address H.H.H

fixed HSRP tracking issue

added policy based routing

added commands:
interface tunnel [0-2147483647]
no interface tunnel [0-2147483647]
tunnel source A.B.C.D
tunnel source fastethernet PORT/PORT
tunnel source serial PORT/PORT
tunnel source loopback [0-2147483647]
tunnel destination A.B.C.D
no tunnel source
no tunnel destination

no frame-relay inverse-arp
clear frame-relay inarp
frame-relay switching
frame-relay route [16-1007] interface serial PORT/PORT [16-1007]
keepalive (for serial interface)
no keepalive (for serial interface)
show frame-relay route

added frame-relay errors messages:
Must enable frame-relay switching to configure DCE/NNI
route command not allowed between two DTE interfaces

removed frame-relay mapping command when subinterface is point-to-point

updated L2 & L3 logic for gre tunnels
updated L2 frame-relay logic

improved connectivity checking hints
fixed cable change issue when there are multiple cables to switch
fixed typing issue during tutorials
fixed HP command to prevent interface command: tag/untag 5 (correct command: tag/untag vlan 5)

iOS 10 update

added additional hints when verifying connectivity

improved layer 2 algorithm

fixed standby tracking command issue
fixed ping issues caused by missing path

added HP global commands:
vlan [1-256] tag [1-12]
vlan [1-256] untag [1-12]

fixed ip nat pool commands

fixed issue when disconnecting from multiple cables

This update introduces a new device, an HP ProCurve switch, allowing for HP to Cisco trunk configurations and testing. Trunk here refers to Cisco's definition of trunk, a port that carries multiple VLANs.

Like our currently supported devices, you can configure the HP switches just as easily with the supported HP provision commands.

Supported provision manager level commands:

show running-config
show config (startup configuration)
show vlan
show vlan port [1-12]
show vlan port [1-12] detail

Supported provision global commands:

interface [1-12]
vlan [1-256]

Supported provision interface commands:

tag vlan [1-256]
untag vlan [1-256]


Supported provision vlan commands:

tag [1-12]
untag [1-12]
no tagged [1-12]
no untagged [1-12]

 

Example:

provision# conf
provision(config)#vlan 10
provision(vlan-10)#untag 2,4-5 
In Cisco terms, the commands above configures ports 2, 4, and 5 to be access ports on vlan 10.

What's new:

fixed deny ACL network checking
other misc updates and fixes

HP switching will be available on version 1.67

added counters for matches in show access-lists and show ip access-lists commands
new host unreachable responses from ping when blocked by ACL

added router privileged commands:
clear ip dhcp binding *
clear ip dhcp binding A.B.C.D

added router configuraton commands:
no access-list [1-99]
no access-list [100-199]

updated ip config /all to display if DHCP is enabled and DHCP server

fixed extended ACL issues
updated outbound ACL checking