RunCline Взлом 1.6.11

Скриншоты

Описание

RunCline provides incline information entered manually in the app and transmits it automatically over Bluetooth. Alternatively, it can read incline directly from your smart treadmill. It will also connect to an external foot pod and/or heart rate monitor and re-transmit the collected metrics over Bluetooth. What's the purpose? You can pair the phone or tablet running RunCline with Zwift and get incline, power, speed, cadence and heart rate. RunCline will also display all metrics on screen for you to view during your running. What's even better? Some smart-er treadmills can also be controlled by RunCline to make them track incline from Zwift on PC or Mac.

As of version 1.6.7, RunCline can also pair with the Apple Watch to get heart rate and display some running metrics. The heart rate feature is using the HealthKit to transmit live heart rate values to RunCline and store them in Apple Health.

Requirements: You need to pair a Bluetooth compliant foot pod and/or supported smart treadmill to RunCline to use the app. Otherwise, you can select the VirtualPod in the list of Foot Pods to use RunCline as a source of speed and incline for Swift.

Pairing screen:
* Select one foot pod in range or smart treadmill (required)
* Select one heart rate monitor in range (optional)
* The "Searching" button will display "Start" once the foot pod device or smart treadmill is paired. If the Start button does not appear within 5 seconds, you may need to activate your foot pod by running or walking.

RunCline screen. The running metrics from the foot pod, smart treadmill and/or heart rate monitor will be displayed on screen and re-transmitted to Zwift over Bluetooth. All running metrics are also saved to a .FIT file that can be emailed or exported after the run.

a) Select "Live" to display live metrics or "10-second" to get average metrics from the past 10 seconds.
b) Use the + and - buttons to select the incline (if no smart treadmill connected).
c) You can click the Volume Up and Down buttons on your phone or tablet to get spoken metric values.

Runcline can be used to run outside. It will provide audio cues at every kilometer or mile. If you are running with power, it can provide audio cues to keep you within your power target. You can define workouts by pace, distance or power. RunCline will notify you at the beginning of each interval. Once your workout is completed, the log report includes detailed results of your run with a summary of all running metrics from your foot pod and more.

List of supported foot pods:
* Stryd
* Zwift RunPod
* MilestonePod
* Runn from NPE
* Garmin foot pods with >CABLE from NPE
* Garmin watches like Fenix 6 with Virtual Run

List of supported Smart Treadmills:
* Bodycraft T1000
* Bowflex BXT128, BXT116, BXT216
* CareFitness Marathon 22
* Decathlon Run, RoadRunner i/B, EZRun
* Domyos-TC and Intense Run
* FitnessFocus (i-Running)
* FitShow
* FlowFitness DTM2000, T3i
* Horizon T202, Omega Z, 7.x AT, Paragon X
* JTX Sprint 9 (i-Console)
* Kettler S2, S4, S6, S8, S10
* LifeFitness F3, T3 and T5 with Track Connect
* NoblePro
* NordicTrack C850S, C970 Pro, S20, S25, S30, T7, T10, Z1300i
* Polar (i-Console)
* Pro-Form 525i, 545i, 575i, 995i, Carbon XL, Pro 1500, Pro 2000, Sport 6.0
* REEBOK GT50, GT60, SL8.0, Jet 300
* SpiritFitness XT285, 385, 485, 685, CT800
* Sole S77, F63, F65, F80, F85 and TT8
* Taurus T10.3
* Technogym MyRun
* TrueFitness PS800
* TRX3500
* Tunturi T90
* Woodway 4Front
* XTERRA TRX3500, 4500
* Treadmills with GEM Retro module

Feedback is more than welcomed and will contribute to make RunCline better for everyone.

История обновлений

1.6.11

2022-11-06

- Get your incline controlled automatically by loading a GPX file with your favourite route.
- Recognize the JFTM 7.0AT as a treadmill. Should work with other 7.xAT too. Incline is now reported correctly by Horizon.
- Fixed incline x10 on XT685.
- Increased distance precision to 1m for laps in run report.
- Fixed the red/green dot indicators (indicating Zwift is connected) on iOS15+.
- Fixed audio cues not playing when changing volume on iOS15+.
- Other bug fixes and improvements.

1.6.10

2022-09-26

- Added R2 Pro WalkingPad treadmills (KS-HCR1AC)
- Adding support for the Maxxus Runmax 7.3. Testing another protocol #8
- Added total distance and time + Power Stress Score in log report on page 3.
- Fixed incline x10 for Spirit XT385

- Fixed detection of Horizon Paragon X as a treadmill rather than a foot pod.
- Fixed incline x10 on TRX3500 and TRX4500
- Added robustness to spontaneous device disconnection to hold speed until RunCline can reconnect.
- Fixed an important memory/CPU usage issue affecting battery and possibly causing crashes.
- Stability and other improvements.

1.6.9

2022-01-27

- Fixed incline control with Zwift for supported smart treadmills.
- Bug fixes and stability improvements.

1.6.8

2022-01-08

UI fixes for iOS 15

1.6.7

2021-12-24

This update is a must have for anyone using RunCline. It adds new cool features, fixes and stability improvements.

- Added AppleWatch support to get heart rate and display running metrics. Power/pace using colors to match workout or race target.
- Add MyRUN as a smart treadmill. Cannot control incline.
- Added a setting to select the Automatic Timer Start Speed.
- Added Power Duration Curve for the last run in the Log report.
- Added dynamic graphics in the split/lap log reports.
- Replaced 10-s Avg by Lap Avg in Running Screen.
- Clipped negative incline control to 0% using FTMS (JFTMOmega Z and others)
- Added HR and Temperature (Stryd only) in the Log report.
- Log files can be viewed later in the Activity menu.
- Added HR and Temperature (Stryd only) in the Log report.
- Added workout with duration only (no effort) like 2' + 3km + ...
- Added Effort Range in Workout String (10'@300w-310w). Range can be in power, %FTP or pace.
- Fixed Horizon 7.xAT newer model. No incline.
- Fixed initial incline on Life Fitness TM.
- Fixed buttons going to zero or max speed in VirtualPod mode.
- Fixed activity list that was not always sorted properly.
- Fixed a crash issue when running below -2500m
- Fixed an app crash with Stryd when cadence was going abnormally high.
- Small uplifting of the UI. Hope you like it.

1.6.6

2021-05-09

- Added GPS coordinates when running outside (Must enable it in Settings)
- Added a graphical workout summary in the RunCline Workout String menu.
- Workout String now supports efforts as power or pace *ranges* (10'@90%-92%, 10'@200w-210w or 10'@4:10/km-4:00/km)
- Added battery status in individual pairing menu + heart rate for HRM.
- Added ability to enable/disable logs in RunCline. Needs app restart.
- Added Stryd temperature to FIT file.
- Device list is now refreshed automatically in pairing menus.
- Fixed issues when both Stryd and Runn are used at the same time.
- Added support for Kettler S2 to S10 (manual incline buttons)
- Added support for for the newer JTX Sprint treadmills (no incline control)
- Set speed to zero when Bowflex on Pause
- Added a Settings to change FIT file time between UTC and Local Time.
- Fixed issues when both Stryd and Runn are used at the same time.
- Test code for auto-incline for WdWayC3D treadmill

1.6.5

2021-02-06

- Added support for BodyCraft T1000
- Added support for Horizon 7.0AT, 7.4AT and 7.8AT from 2020+ (not reporting incline)
- Added incline control with T202
- Added support for DKN RoadRunner i
- Added effort in speed in workouts (like 10'@13.3kph or 10'@6.5mph)
- Added RunPod/MilestonePod battery power
- Added power compensation for negative incline
- Make the Runn appear as a Smart TM.
- Validate Runn speed&cadence when jumping off the TM.
- Fixed display when Runn is used with a foot pod
- Fixed HR display in RunCline in VirtualPod mode
- Fixed DKN Road Runner
- Steering control based on incline (need Hack #2)
- Small fixes for GEM incline control
- Multiple stability and performance improvements.

1.6.4

2020-12-22

- Added CareFitness treadmills with incline-control.
- Added Spirit CT800 treadmills.
- Improved incline-power compensation while walking.
- Major stability and performance improvements.

1.6.3

2020-11-22

- Added Domyos TC/IR with incline control
- Added the ProForm 575i
- Fixed a crash issue when ending/saving a run with End Run (very rare).
- Fixed Bowflex T216 speed
- Fixed Flight Ratio units for Zwift Pod. Completed "Future" metrics
- Fixed something for Decathlon Dual HR HRM
- Fixed an issue when using both a RunPod and a Reebok treadmill

1.6.2

2020-11-01

- Added support for NoblePro treadmill
- Fixed the LifeFitness F3, T3 and T5 with Track Connect console.
- Small improvements to the Tunturi and FitShow treadmills.
- Fixed precision and display of Average Pace in RunCline.

1.6.1

2020-10-18

- Added Manual Laps and Workout Laps in FIT files. Check it out on PowerCenter or GC!
- Added support for Tunturi TM (controllable).
- Added Woodway 4Front (2016+). Testing Woodway 4Front (2015-)
- Added GEM Retro incline control (needs test).
- Added a Settings to disable BT Speed&Cadence service when using Kinomap. Incline controls is supported with Kinomap.
- Fixed incline in dual pairing mode on the Proform
- Another attempt at the LifeFitness with TrackConnect
- Fixed Activity Share on iPad

VirtualPod:
- Memorized preset speed buttons & improved buttons dynamic.
- Improved distance precision.

1.6.0

2020-10-01

- Introduction of VirtualPod to run on Zwift without a foot pod.
- Added support for Kinomap app as FTMS device (allows incline control)
- Fixed Proform smart treadmill (now fully working)
- Fixed Bowflex BXT128 incline and speed
- Fixed Activity Share crash on iPad.
- Stability and performance enhancements

1.5.0

2020-09-20

- Added support for FitShow smart treadmills (controllable)
- Added support for Proform (I-TL) smart treadmills
- Added artistic GPS coordinates to FIT file to trick Strava into showing altitude data.
- Added Air Power to FIT file and running screen (tap form power to see)
- Updated Help pages
- Fixed issues with the Runn
- Fixed cases where some treadmills would go full speed on End Run.
- Stability and performance enhancements

1.4.5

2020-08-25

- Improved automatic reconnection to foot pod/treadmill when connection is lost.
- Fixed RunPod/MilestonePod detected as a smart treadmill.

1.4.4

2020-08-23

RunCline v1.4.4 Build 146
- Exciting new feature: Detects incline from Zwift on PC and controls incline on some smart treadmills like Sole TT8 (non-US), Reebok, i-Console, i-Running, Domyos, DKN RUN, LifeFitness and Horizon T202.
- Added support for Bowflex and Horizon T202 smart treadmills.
- New pairing should allow more treadmills to be supported by default.
- Fixed +/- incline buttons not appearing with >CABLE.
- Added alternative ways of exporting FIT files (other than just email).

1.4.3

2020-07-15

- Fixed dark theme on iOS 13

1.4.2

2020-07-13

- Added support for Decathlon Domyos-TC, DKN RUN and JTX Sprint 9 smart treadmills.
- Possibly bug fixes I don't even remember ;-)

1.4.0

2020-05-13

- Added Reebok smart treadmils
- Added Polar i-Console smart treadmills
- Added support for Garmin watches with Virtual Run like Fenix 6
- Added Sole treadmill heart rate
- Added new Sole treadmills reporting as F63-
- Increased calibration level up to 130% for manual treadmills
- Fixed Stryd battery status when HRM monitor is used.
- Fixed distance & heart rate on Reebok, i-Console, i-Running, NPE >CABLE
- Fixed cadence on NPE Runn
- Fixed rep count >= 10 in workouts

1.3.0

2020-03-22

- Added an Activity screen in Start screen (magnifier) to view the last 7 days of activities. Files can be emailed.
- Added support for Sole TT8
- Added support for Xterra TRX3500. Start treadmill at 10 kph before starting RunCline.
- Added new metrics (RE, HPR, Flight Time and Flight Ratio) when touching the different rows of metrics on iPhone. Toggle to return to other metrics.
- Power estimation is now enabled by default on devices not supporting power.
- Fixed the new GEM module broken after v1.1.1 Build 72.
- GUI clean-up

As usual, contact me for new features or issues.

1.2.1

2020-01-11

- Fixed an issue with Sole treadmill introduced in v1.2.0
- Added a message about the auto-start feature in the running screen.

1.2.0

2020-01-08

- New pairing screen with independent pairing for foot pods and smart treadmills. If desired, you can pair both a foot pod and a smart treadmill to get running metrics from the foot pod and incline from the treadmill.
- Activity FIT file generation and email compatible with Stryd, Garmin Connect, ...
- Added "End Run" top left button in the running screen. Also showing automatically the 3-page log report after the run.
- Added incline-compensated power while walking (for power walkers).
- Sole treadmills: The incline reported in RunCline now tracks the real incline from the belt (versus the incline dialed).
- Fixed an elevation gain/loss issue when using Imperial units in RunCline.

1.1.1

2019-12-07

- Fitness Focuss smart treadmill (i-Running) is now fully supported.
- Fixed dropout issues with Sole treadmill in Zwift.
- Added 1.5% incline step

Next: XR500 treadmill still in progress.

1.1.0

2019-11-03

- Added support for the Sole treadmills F85, F80, S77 and F63. Possibly some others. See procedure below.
- Added support for new GEM firmware using FTNS service.
- Fixed an important speed lag issue in Zwift when HRM is paired with RunCline or power is sent as heartrate to Zwift. This could even lead to possible dropouts in Zwift.
- Added ability to send calibrated metrics to Zwift over BLE. Must be enabled first in RunCline's Settings. Then go to Calibration screen and turn the calibration wheel until the speed shown matches the one on your treadmill. Make sure to delete Zwift's calibration first to avoid double compensating.
- Next: Currently working on XR500 and Fitness Focus treadmills' support.

Proper procedure for Sole treadmills users:
1- Start a workout on the TM using Start button. Make it move at any speed.
2- Start RunCline. Make sure not to start the RunCline app before the TM is moving.
3- Start Zwift.

1.0.8

2019-09-29

- Ability to send power information to Heart Rate field in Zwift (Must be enabled in Settings)
- Displaying additional live running metrics such as RE, HPR, Flight Time, Flight Ratio, Power:GCT and VO:StepLength on devices with more than 700 pixels wide (larger iPhones or iPad). More to come.
- Fixed a crash and incline + button not working correctly on iOS 13.1

1.0.7

2019-09-28