8.3
2022-10-07
1) A few users have experienced data issues with Boost and Throttle position on the S7 fixed stream. This was due to a change where the MAP1 and TPS1 was changed to use MAPMAX and TPSMAX to cover all sensors on the ECU.
2) Other bug fixes have been carried out to improve data ratio of valid data and also to increase speed.
8.1
2022-07-05
1) Fix to an issue with screens in settings only showing 1 screen and not full list.
2) Fix to any restricted features within the app. Everything should be unlocked as normal again.
8.0
2022-07-02
1) Change to Quick Setup - Frame Content to allow multiple entries for a single input eg RPM can now be added to both frame 1 and frame 10 to double the update rate
2) Altered mail background animation
3) Graphite Dash has been given a fresh look
4) BT Data stream has been changed to cater for the Syvecs S7 ECU default stream setup
5) Frame allowed has been reduced from 40 to 20. This is to overcome an restriction with iOS BT limitations
6) Removed the Garage option
6.23
2020-09-11
Added in a new switch to turn Auto Stream detection on / off. If using CAN Echo then set the switch to OFF in Settings -> General.
If using CAN Echo on an S7 ecu then again set the switch to OFF and also in SCal set frames 21-40 Frame frequency to UNUSED to increase performance in the app.
6.21
2020-09-08
Additional fix to CAN Echo data stream detection
6.20
2020-09-03
Fix to the CAN Echo stream due to it stopping working after the last release. We have altered the way the BT stream works and can now auto detect the different stream types between CAN Echo and SYVECS fixed stream.
6.16
2020-08-20
1) Fixed Syvecs Fixed stream not displaying data correctly
2) Fixed Frames 32-40 not working correctly and causing other frames to become corrupted so the data could not be displayed
6.3
2019-12-18
Added 8 new inputs to support KT8_1 to KT8_8.
6.2
2019-11-10
v6.2 patch:
1) Adjustment to the Auto Startup Dashes - Recommended update for users.
2) iPhone 11 Pro Max and iPhone 6 Plus fix for screen layout issues.
v6.1 patch:
1) New Search feature to make it easier and quicker to find inputs on the Quick Setup screen and also changing gauges / indicators in the dashes
2) Fixed Indicator position in SP3 dash when changing Indicators
v6.0:
1) New Home screen menu look and feel
2) New feature to load into last used dash on startups
3) New slick looking theme throughout the app
4) Performance screen altered to give a fresher look and feel
5) Fix to reset switches back to previously selected position on bluetooth reconnection or module restart
6.1
2019-11-08
v6.1 patch:
1) New Search feature to make it easier and quicker to find inputs on the Quick Setup screen and also changing gauges / indicators in the dashes
2) Fixed Indicator position in SP3 dash when changing Indicators
v6.0:
1) New Home screen menu look and feel
2) New feature to load into last used dash on startups
3) New slick looking theme throughout the app
4) Performance screen altered to give a fresher look and feel
5) Fix to reset switches back to previously selected position on bluetooth reconnection or module restart
6.0
2019-11-04
1) New Home screen menu look and feel
2) New feature to load into last used dash on startups
3) New slick looking theme throughout the app
4) Performance screen altered to give a fresher look and feel
5) Fix to reset switches back to previously selected position on bluetooth reconnection or module restart
5.1
2019-10-14
1) New SP3 Dash
2) New SP4 Dash
3) Performance improvements
4) Bug Fixes
5.0
2019-10-02
1) Important bug fix to allow iOS 13 to continue to run without crashing - (further iOS 13 updates are in progress but this version should stop the crash and additional updates will come after)
2) New SP2 dash
3) New S7 support for 40 frames along with S7 default frame contents option
4) Additional bug fixes and improvements
4.5
2019-05-07
1) CALSWITCH (Calibration) gauge as it did not show Cal 1 when selected
2) TCSWITCH (Traction control) gauge as it did not show Cal 1 when selected
3) Added AirConSwitch input (Same type as ALS and LC)
4) Added AirConCtrl input (Same type as ALS and LC)
5) Altered touch area on the indicators e.g. LC / ALS to make selecting easier
4.3
2019-03-13
1) CAL Switch Gauge displaying the selected CAL as + 1
2) TC Switch Gauge displaying the selected TC as + 1
3) N2OP_BAR and N2OP_PSI alarms fixed
4.2
2019-02-23
1) Improved Switch changing (Cal & TC) between app and Bluetooth module as module did not always receive the change.
2) General improvements and maintenance.
4.1
2019-01-07
*IMPORTANT UPDATE RECOMMENDED! - due to point 1 below.
1) Correction to reading all slot 3's data as the incorrect value was being extracted causing incorrect values to be converted and used throughout the app.
2) Brand New Performance system including a brand new Drag Tree.
3) Tune up for when sending Switch commands to bluetooth device.
4) Fix crash on iPad when sharing Data Logs
5) General backend improvements and maintenance.
4.0
2018-10-14
1) Massive upgrade to the BT Connection to optimise the stability and speed ... HUGE IMPROVEMENT!
2) A new Dash called SP1 - Clean dark style dash
3) New Data logging system that allows Data log files to be shared and viewed via the Syvecs SView software from the app.
4) General maintenance of the app along with backend process improvements
This upgraded is highly recommended for all uses !!! ... Enjoy...
3.0
2018-07-17
1) Has a whole new look and feel for the official go live.
2) Fixed issue with screens on Performance and Race Stats screen where screens go blank after changing screens.
3) General maintenance and performance tune ups.
2.8
2018-04-17
1) Altered IAP Process and Promo Code logging.
2.7
2018-04-12
1) Additional Tune-ups and performance changes.
2) Fix to PRP1 Input.
2.6
2018-04-05
1) Performance enhancements.
2.5
2018-03-21
A number of Tune-ups and alterations to improve the performance, speed and memory management.
2.4
2018-03-16
1) Fixed EOP1_PSI (Oil Pressure) reading as part of the calculation was reading in millibar before converting to PSI
2) Fixed EOP1_BAR (Oil Pressure) reading as it was reading in millibar
3) Fixed PRP1_PSI (Post Restrictor) reading as part of the calculation was reading in millibar before converting to PSI
4) Fixed PRP1_BAR (Post Restrictor) reading as it was reading in millibar
5) Added a fix in for Alarm Warnings activating
6) Added alterations to try help performance
2.3
2018-03-08
1) Bug Fixe Release