ViewBack Взлом 3.0

Скриншоты

Описание

This application allows a user to configure and monitor RF levels of a Vislink ViewBack receiver. The application communicates with the device via Bluetooth™.

Operating in the 2GHz licenced band, the receiver supports Vislink proprietary robust LMS-T demodulation in addition to low latency H.264 decoding.

Outputs include HDMI and HDSDI, the latter being switchable, in wireless camera applications, between the local camera video and the return received video. A lens interface is provided to utilise the ‘return’ button of the camera lens for switching the HDSDI output.

On switching, picture interruption is avoided by use of local ‘frame lock’ information extracted from the camera source.

The Vislink ViewBack is supplied with flexible quarter-wave antennas, and various mounting options for camera and Steadicam rigs.

История обновлений

3.0

2021-04-16

The ability to select a multiplexed stream based upon its Service Name has been added.

2.0

2019-03-02

Bluetooth name filtering - When filtering is enabled, only ViewBack devices whose custom Bluetooth name is prefixed with VB_ will be shown.

Presets - Preset menus have been added to allow the saving of regularly used configurations.

Service selection - The ability to choose from a multiplexed stream has been added. Service selection is by manually entering Video, PCD and audio PID values.

ASI Diversity - ASI Diversity operation has been added enabling 2 ViewBacks to be daisy chained, via ASI, to increase coverage of reception. This is for no reverse video applications. Internal cable needs to be moved to enable ASI output.

Additional Video Format - 1080i60 has been added.

Demo Mode - If no ViewBack Bluetooth devices are found the user may enter Demo Mode to simulate interaction with a ViewBack.

1.0

2017-11-08