bootmod3 Взлом 2.0.18

Скриншоты

Описание

bootmod3 is the First and Most Widely Adopted flash tuning platform for the BMW F and G series vehicles and the new A90/A91 Toyota Supra.

Map Switching using steering wheel, Flex Fuel Tuning, Anti-Lag, Ethanol Content Checking on the RPM gauge in the dash, and more..

*** All New Map Editor!

Connect an ENET cable to your iOS device or use the bootmod3 WiFi Adapter for any programming, dashboard, datalogging and diagnostics.

bootmod3 allows end users to unleash the full performance potential of their BMW while doing so as the factory intended by programming the factory engine control unit (ECU/DME) and transmission (TCU, where applicable) over the OBD diagnostic port.

Program your car and gain 70-120hp in just 3minutes with an off the shelf tune. Switch among pump gas and race gas maps in just seconds.

CustomROM Features available for most vehicles supported:
- Map switching using steering wheel cruise control buttons, switching entire calibration tables right inside the factory DME
- Flex fuel functionality integrating a Flex Fuel Sensor
- Antilag functionality to build boost off the line or while rolling
- Live adjust screens for adjusting exhaust burble on the fly without re-flashing using a simple slider control in the app
- In-Dash Ethanol content check on the RPM gauge using cruise buttons on the steering wheel (e.g. 1500rpm = 15% ethanol, 6000rpm = 60% ethanol)

/// OTS maps
Load pre-made performance tunes for your vehicle

/// CUSTOM TUNING
Customize the performance tuning on your DME / ECU using our custom tuning interface. Tailor performance, sound, fuel economy to your specific needs. Flash the transmission with GTS software on supported models.

/// Live Monitoring
Monitor your engine behaviour using a configurable gauges layout to keep on eye on any of the hundreds of engine monitors internal to the ECU including BMW specific logging channels and RAM variables. Monitor torque limits, boost, ignition timing, variable valve timing, fuel targets, fuel trims, across all cylinders, etc.

/// Cloud Enabled
Cloud services allow for datalogs and maps to be stored in one central location and access from any location

/// FEATURES
For feature descriptions please refer to our website for each particular vehicle you're interested in tuning using the bootmod3 platform.

Supported vehicles:

Bosch MEVD17.2 DME Vehicles:
F8x M3, M4
F2x F3x 135i, 235i, 335i, 435i
F1x 535i, 640i, M5, M6, 550i, 650i, X5, X6
F87 M2, M2 Competition
F4x X4, X4M
F8x X5M, X6M

Bosch MG1 DME Vehicles:
F2x 2015 - 2019 M140i
F2x 2016 - 2019 M240i
F3x 2015 - 2018 340i
F3x 2016 - 2019 440i
G3x 2017+ 540i
GT G32 2017+ 640i
G1x F0x 2015+ 740i
G01 2017+ X3 M40i
G02 2018+ X4 M40i
G8x M3/M4
G9x X3M/X4M

2020+ A90/A91 Toyota Supra

* This racing product is for competition closed course use only.

** Use of this software may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. bootmod3 makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

История обновлений

2.0.18

2023-09-20

- bm3 WiFi Firmware Adapter Update: Connectivity Fix v3.13.3.112
- bm3 WiFi Adapter: Support for auto-shutoff low power mode for F series vehicles for both v2 and v3 adapters
- bm3 WiFi Adapter: Default network name has unique SSIDs among nearby connected adapters
- bm3 WiFi Adapter: Always show bottom right menu
- Dashboard: audible/sound option for channel min/max alerts
- Dashboard: changing from portrait to landscape mode preserves current dash screen

2.0.17

2023-09-10

- WiFi adapter firmware listing screen with update functionality
- WiFi Adapter firmware v3.14.3.107

2.0.16

2023-09-06

Updates to translations and bm3 wifi adapter firmware

2.0.15

2023-09-05

- bm3 WiFi Adapter: New Management screens
- bm3 WiFi Adapter: Firmware OTA update support
- bm3 WiFi Adapter: Default network name now contains 7 of the vehicle VIN to provide unique SSIDs among nearby connected adapters
- bm3 WiFi Adapter: Ability to reserve and clear IP address reservations
- bm3 WiFi Adapter: Ability to override and set your own bm3 wifi network password for added security
- Landscape mode support updates
- Other minor fixes including additional DME types

2.0.14

2023-08-11

- OBD Agent v0.50.018

2.0.13

2023-08-08

- Landscape mode log chart fix
- OBD Agent v0.50.017 update

2.0.12

2023-08-03

- Updated OBD Agent to 0.50.015
- Updated language translations

2.0.11

2023-08-01

Additional vehicle and diagnostics support

2.0.10

2023-08-01

- Landscape mode support including dashboard
- Dashboard gauge min/max alerts and peak recall handling update
- Maps sort filter fix
- Code read fix for inactive codes on V8 dual DME vehicles
- Map config handling update for custom tune requests

2.0.9

2023-05-30

- Latest software update F4C9L8J5B S58 CustomROM support added
- Datalog channels selection limit check added with 70 max to prevent channel overload
- New message to user When no software IDs shown on activation screen
- Code read not returning in some scenarios fixed
- Map Config settings across maps slots in multimap fixed
- Remove previous download after config on a newly acquired OTS map
- Other minor features and fixes

2.0.8

2023-05-11

- GEN2 B58 and B48 CustomROM Update including Supra and Femto unlock vehicles
- Map config save/sync without internet
- DTC Code Read for inactive/shadow codes
- Full Offline Custom Tuning support via external Map Editors using BM3C file (bm3 cloud services and map editor are now optional)
- OBD Agent 0.50.009 update
- Other minor fixes

Release also has partial Mild Hybrid support, full support to be covered in the following release!

2.0.7

2023-04-13

- Added connectivity bar to flash progress screen
- Phone getting hot (high CPU usage) fixed

2.0.6

2023-04-10

Minor fixes to layout elements

2.0.5

2023-04-04

- My Maps now shows all acquired OTS maps as per numerous customer requests
- Last flash map indicator update
- HPFP/DI fuel injector selection fix

2.0.4

2023-03-29

Minor fixes:
- Support for older versions of iOS, iOS12/13 devices
- Units on dash gauge config
- Acquire ots overlay screen
- Language localization for default on startup
- Transmission flash without internet access

2.0.3

2023-03-27

Map config single bank fueling for s55 missing added back in
Reset all adaptations and disable active sound
Fix for transmission flash not starting

2.0.2

2023-03-25

Minor fixes

2.0.1

2023-03-23

- Fix for OTS maps not displaying under octane selections for E50, CHN91, and Stage 0+ OTS maps

2.0.0

2023-03-23

We are beyond excited to share the brand new bootmod3 app with you. Over the years we have been able to gather incredible feedback from users on how to improve and, 2 years later, we're ready to show it to you finally!

Over 400 tasks have been completed during its development with primary focus on the following:

New User Interface
◦ App entirely rewritten/redesigned using the latest tech to enhance usability for the widest possible range of mobile and desktop/laptop devices.
◦ Connectivity bar displaying connectivity with vehicle and bootmod3 cloud
◦ Multi-user login support - Log in once, for any number of vehicles owned

Multi-Language Support
◦ We've added support for close to 30 languages. If you're uncomfortable in the default English language of the app, choose your native language from the Settings screen and all the app's text, buttons, will be translated!

Offline Support
◦ Every feature of the app has improved offline support with improved user messaging
◦ Flash without internet, including re-locking DME
◦ Access all app features without internet access

Dashboard
◦ Ability to add Multiple dash screens and swipe through them
◦ Tap to configure gauges for Small/Large size
◦ Long-tap to enable Dash configuration mode
◦ Configure Min/Max Alerts per channel and view them in a dedicated screen
◦ Arrange gauges in any order
◦ Choose between Gauges and List layout

Maps
◦ Swipe on any map to see inline menus to flash, config, change, delete maps
◦ OTS and My Maps screens combined into one screen for ease of navigation
◦ OTS Maps organized by Stage with a simple octane selector enhancing and simplifying user experience when looking at the vast selection of bootmod3 OTS Maps for each engine type
◦ OTS Maps and My Maps remain separated for a cleaner end user experience
◦ Auto-download of Custom Map updates
◦ Sort maps by update date, created date, name
◦ Search maps by name

Datalog Charting
◦ Datalogs now get charted in landscape mode with improved tap, pinch/zoom support and with channels displayed in a separate tab to the right
◦ Charts are now entirely usable even on smaller screens!
◦ Toggle channels on/off on charts easily with a textual search

0.40.037

2023-01-17

Additional ram logging channels.

0.40.036

2022-12-24

DME type detection fix for MG1 PPC.

0.40.035

2022-12-23

- Additional RAM logging channels for Gen-2 B58s

0.40.033

2022-12-18

Added handling for ignoring aftermarket controller messages in vehicles during diagnostics