MG Flasher Взлом 375 + Чит Коды
Разработчик: JR Auto Performance Inc.
Категория: Утилиты
Цена: Бесплатно
Версия: 375
ID: com.jrautoperformance.mgflasher
Скриншоты
Описание
MG Flasher is a mobile App to tune your BMW equipped with an MG1 ECU and B46, B48 or B58 engine by OBD using ENET Wi-Fi or ENET cable*. Flashing time on ENET is only 15 - 20 seconds! Disclaimer: For off-road use only.
*Initial flash/ECU unlock with ENET will take approximately 4 - 6 minutes.
Flashing License purchase will allow you to use following MG Flasher functions:
• Switchable Maps On-The-Fly - WORLD'S FIRST SOLUTION FOR BMW B58/B48 - through a simple combination of cruise control buttons you can quickly select between mapping, without the need to reflash vehicle! Support for HPFP included! Hybrids and Gen 2 switchable maps, including all ethanol maps, are under development.
• Dynamic Exhaust Burble On-The-Fly - via a simple combination of cruise control buttons you can change the intensity of the burbles whenever you like! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Max Cooling On-The-Fly - With a simple cruise control button combination sequence, you can enable the option without reflashing the car! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Torque Limit Adjustability - TCU 8HP Limiter Lifted for Gen 2 B48 and B58 platforms! Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery.
• Speed Limit Removal, Startup Roar, Torque by Gear Limiter and Burble Flame Map available on select software
• Ethanol Blends (up to E30) are built into our OTS maps and available using Switchable Maps (on select vehicles only)
• Cold start with CAT heating delete (racing/off-road use only)
• Sport Gauges (HP and TQ) adjustable by user!
• Custom flashing – flash custom maps prepared by us or other tuners/users
• OTS maps/ All OTS pack (subject to additional cost)
• Logger - log real time data and plot it into graphs for troubleshooting and optimizing (subject to additional cost)
• Cloud Log Viewer - Professional log viewing on logs.mgflasher.com
• Diagnostic- Read and clear BMW specific DTC's
• Reset various adaptations, restore coding
• CVN number (Checksum Verification Number) along with flashing counter stays untouched. This means our software will be virtually invisible to dealer level diagnostic tools
ALL future updates to the tune are FREE of cost. If we introduce a newer version, you won’t have to pay anything to get the upgrade
Supported vehicles:
BMW M140i/120i/125i/M135i F20/F21/F40
BMW M240i/220i/225i/230i/228i/M235i - F22/F23/F44
BMW M340i/318i/320i/330i/330e - F30/F31/F34/G20/G21/G28
BMW M440i/420i/430i - F32/F33/F36/G22
BMW 540i/520i/530i/530e - G30/G31/G38
BMW 640i/630i - G32
BMW 740i/740Li/730i/730Li/740e/740Le - G11/G12
BMW 840i - G14/G15/G16
BMW X1 20i/25i/28i -F48
BMW X2 20i/25i/28i/M35i - F39
BMW X3 M40i/20i/30i - G01
BMW X4 M40i/20i/30i - G02
BMW X5 40i - G05
BMW X6 40i - G06
BMW X7 40i - G07
BMW Z4 M40i - G29
BMW Z4 20i/30i - G29
Toyota Supra - A90
*Initial flash/ECU unlock with ENET will take approximately 4 - 6 minutes.
Flashing License purchase will allow you to use following MG Flasher functions:
• Switchable Maps On-The-Fly - WORLD'S FIRST SOLUTION FOR BMW B58/B48 - through a simple combination of cruise control buttons you can quickly select between mapping, without the need to reflash vehicle! Support for HPFP included! Hybrids and Gen 2 switchable maps, including all ethanol maps, are under development.
• Dynamic Exhaust Burble On-The-Fly - via a simple combination of cruise control buttons you can change the intensity of the burbles whenever you like! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Max Cooling On-The-Fly - With a simple cruise control button combination sequence, you can enable the option without reflashing the car! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Torque Limit Adjustability - TCU 8HP Limiter Lifted for Gen 2 B48 and B58 platforms! Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery.
• Speed Limit Removal, Startup Roar, Torque by Gear Limiter and Burble Flame Map available on select software
• Ethanol Blends (up to E30) are built into our OTS maps and available using Switchable Maps (on select vehicles only)
• Cold start with CAT heating delete (racing/off-road use only)
• Sport Gauges (HP and TQ) adjustable by user!
• Custom flashing – flash custom maps prepared by us or other tuners/users
• OTS maps/ All OTS pack (subject to additional cost)
• Logger - log real time data and plot it into graphs for troubleshooting and optimizing (subject to additional cost)
• Cloud Log Viewer - Professional log viewing on logs.mgflasher.com
• Diagnostic- Read and clear BMW specific DTC's
• Reset various adaptations, restore coding
• CVN number (Checksum Verification Number) along with flashing counter stays untouched. This means our software will be virtually invisible to dealer level diagnostic tools
ALL future updates to the tune are FREE of cost. If we introduce a newer version, you won’t have to pay anything to get the upgrade
Supported vehicles:
BMW M140i/120i/125i/M135i F20/F21/F40
BMW M240i/220i/225i/230i/228i/M235i - F22/F23/F44
BMW M340i/318i/320i/330i/330e - F30/F31/F34/G20/G21/G28
BMW M440i/420i/430i - F32/F33/F36/G22
BMW 540i/520i/530i/530e - G30/G31/G38
BMW 640i/630i - G32
BMW 740i/740Li/730i/730Li/740e/740Le - G11/G12
BMW 840i - G14/G15/G16
BMW X1 20i/25i/28i -F48
BMW X2 20i/25i/28i/M35i - F39
BMW X3 M40i/20i/30i - G01
BMW X4 M40i/20i/30i - G02
BMW X5 40i - G05
BMW X6 40i - G06
BMW X7 40i - G07
BMW Z4 M40i - G29
BMW Z4 20i/30i - G29
Toyota Supra - A90
История обновлений
375
2023-08-07
Changed
- App internal files management adjustment
---PREVIOUSLY
Changed
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
- App internal files management adjustment
---PREVIOUSLY
Changed
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
372
2023-06-12
Changed
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
---PREVIOUSLY
Changed
- Updated link to MG Flasher Logs Cloud - China
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
---PREVIOUSLY
Changed
- Updated link to MG Flasher Logs Cloud - China
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
371
2023-06-02
Changed
Updated link to MG Flasher Logs Cloud - China
---PREVIOUSLY
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
Updated link to MG Flasher Logs Cloud - China
---PREVIOUSLY
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
370
2023-05-30
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
369
2023-05-18
Changed
- Resolved missing addresses when using custom code diagnostic on non-beta CC versions
- Missing OTS Maps feedback prompt will be shown only after redeem
- Resolved missing addresses when using custom code diagnostic on non-beta CC versions
- Missing OTS Maps feedback prompt will be shown only after redeem
368
2023-05-03
- Better recognition of S58/S63 engines
- Resolved login issues
--- PREVIOUSLY
- Review prompt will be visible only when car is already flashed by our OTS map
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
- Resolved login issues
--- PREVIOUSLY
- Review prompt will be visible only when car is already flashed by our OTS map
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
366
2023-04-27
- Review prompt will be visible only when car is already flashed by our OTS map
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
--- PREVIOUSLY
- Resolved bug with flashing back to full stock on Femto ECUs
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
--- PREVIOUSLY
- Resolved bug with flashing back to full stock on Femto ECUs
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
365
2023-03-22
- Resolved bug with flashing back to full stock on Femto ECUs
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
---Previous
- Corrected saving of Burble Upshift settings
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
---Previous
- Corrected saving of Burble Upshift settings
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
364
2023-03-13
- Corrected saving of Burble Upshift settings
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
--PREVIOUSLY
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
--PREVIOUSLY
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
363
2023-03-08
Changed
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
--PREVIOSULY
Added
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
--PREVIOSULY
Added
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
362
2023-03-06
Added
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
360
2023-02-18
- Resolved missing custom options for select engines
- Added detection of bFlash's new bench unlock
- Handle not resolved cc version during car activation flash step
--PREVIOUSLY
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
- Added detection of bFlash's new bench unlock
- Handle not resolved cc version during car activation flash step
--PREVIOUSLY
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
358
2023-02-15
Added
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
Changed
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
Changed
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
357
2022-12-11
- Popup information that ots maps are not yet available as a part of redeem process. User will be able to create support request immediately.
- Initial support for Alpina S58 BTLD 78E8
- Logger Alerts (Beta)
- Support for additional ENET adapters
--Previously
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
- Initial support for Alpina S58 BTLD 78E8
- Logger Alerts (Beta)
- Support for additional ENET adapters
--Previously
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
356
2022-11-23
Added
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
355
2022-11-15
- Added new custom option for aftermarket intakes, to remove DTCs
- Resolve the issue with S58 engine code recognition
- Resolve the issue with S58 engine code recognition
354
2022-10-26
- Initial support for flashing/logging SWFL 7972-080.072.012 (R4C9L8PCB)
- Adjusted Decat flashing option to remove DTC code 12AD01
- Corrected custom option addressing for F-Series SWFL 7972
- Better StockMap file marking in map files page
- Resolved visibility of Burble CW_SOUND for non-debugging items
- Adjusted Decat flashing option to remove DTC code 12AD01
- Corrected custom option addressing for F-Series SWFL 7972
- Better StockMap file marking in map files page
- Resolved visibility of Burble CW_SOUND for non-debugging items
352
2022-09-22
Added:
- Initial support for new F-Series bootloaders 7226 & 722A
- Custom option and logging support for F-Series SWFL 7972
- Initial support for new F-Series bootloaders 7226 & 722A
- Custom option and logging support for F-Series SWFL 7972
351
2022-09-14
Added:
- Restore necessary data from server when car is in bootmode.
Changed:
- Increase idle rpm options to 1500 RPM
- Improved rescue from bootmode (failed flashes)
- Resolved Torque by Gear limiter on select Hybrid software
- Restore necessary data from server when car is in bootmode.
Changed:
- Increase idle rpm options to 1500 RPM
- Improved rescue from bootmode (failed flashes)
- Resolved Torque by Gear limiter on select Hybrid software
350
2022-09-02
- Typo "idleing" => "idling"
- Resolved car recognition issue
- Resolved car recognition issue
349
2022-08-27
- Added idle custom option
- Base idle
- Clutch-out idle delay (6MT)
- Clutch-in idle (6MT)
- Clutch-in fast RPM change (6MT)
- Sync user adjusted custom options and user defined 'car name / picture' between different devices
- Fixed issue where engine have not been detected by app.
- Resolved failed flashing retries when flashing OTS or custom map
- Added bootmode detection to ECU Info page
- Custom Code Update available popup will be shown only once
- Resolved missing/null targetCustomCodeVersion when flashing custom maps on select software versions
- Base idle
- Clutch-out idle delay (6MT)
- Clutch-in idle (6MT)
- Clutch-in fast RPM change (6MT)
- Sync user adjusted custom options and user defined 'car name / picture' between different devices
- Fixed issue where engine have not been detected by app.
- Resolved failed flashing retries when flashing OTS or custom map
- Added bootmode detection to ECU Info page
- Custom Code Update available popup will be shown only once
- Resolved missing/null targetCustomCodeVersion when flashing custom maps on select software versions
348
2022-08-14
- Fixed issue where engine was incorrectly identified by app.
- Removed shadow code DTC: CDA506
- Resolved issue with flashing older S63 bootloader
- Improved automatic detection of Femto unlocked ECUs
- Fixed logger crash on some devices
- Resolve missing/null targetCustomCodeVersion when flashing custom maps on select software versions
- Removed shadow code DTC: CDA506
- Resolved issue with flashing older S63 bootloader
- Improved automatic detection of Femto unlocked ECUs
- Fixed logger crash on some devices
- Resolve missing/null targetCustomCodeVersion when flashing custom maps on select software versions
346
2022-08-04
- Ability to filter logger variables
- Custom Code logger variables should be accessible by newer custom code version after upgrade
- Resolved the issue when parameters configuration change could freeze the logger itself
- Access to logger files is only possible when there is no active file recording
- Burble on-the-fly Slot 0 uses original burble aggression mapping (instead of MGF mapping) when burble option isn't marked (or flashing Stock calibration with custom code)
- Resolved flashing option issue with old TCU limiter bypass solution (with Femto unlocked ECUs where custom code is not up to date)
- Custom Code logger variables should be accessible by newer custom code version after upgrade
- Resolved the issue when parameters configuration change could freeze the logger itself
- Access to logger files is only possible when there is no active file recording
- Burble on-the-fly Slot 0 uses original burble aggression mapping (instead of MGF mapping) when burble option isn't marked (or flashing Stock calibration with custom code)
- Resolved flashing option issue with old TCU limiter bypass solution (with Femto unlocked ECUs where custom code is not up to date)
345
2022-07-16
Added
- Flashing and logging support for new software:
- R2C9H6P7B (3E7D-060.160.007)
- H4C996K5B (4ACF-030.160.005)
- New logging parameters:
Engine idle status
- Radiator flap flashing option for all G-Series vehicles
- Additional DTC codes to be removed for decat and radiator flap
- Allow to delete account from User Page
- Dynamic TCU torque limiter (custom code) for all supported platforms (B4x, B5x, S58, & S63) including Hybrids
- Aftermarket LSD installed Option with adjustable final drive ratio (for ECU calculations)
- Detection for too many selected log parameters
- New logging parameters:
Launch Control Status
TCU Torque Limit
Clutch & Brake Pedal Status
Sport Gauge Readings
Changed
- Updated TCU torque limiter custom code for improved launch control handling (dependent on brake status)
- Logger file buffer size available only on customer support request - not required in normal use
- Adjust gauge's background overlay on iOS platform
- Custom uploaded logger variables are instantly available to log & display
- Epoch Time parameter added back to logger file
- Master & Slave module switch reinitialize the logger instantly
- Scroll view support for Register Page
- Logger can read 2-3 times more data than before
- Flashing and logging support for new software:
- R2C9H6P7B (3E7D-060.160.007)
- H4C996K5B (4ACF-030.160.005)
- New logging parameters:
Engine idle status
- Radiator flap flashing option for all G-Series vehicles
- Additional DTC codes to be removed for decat and radiator flap
- Allow to delete account from User Page
- Dynamic TCU torque limiter (custom code) for all supported platforms (B4x, B5x, S58, & S63) including Hybrids
- Aftermarket LSD installed Option with adjustable final drive ratio (for ECU calculations)
- Detection for too many selected log parameters
- New logging parameters:
Launch Control Status
TCU Torque Limit
Clutch & Brake Pedal Status
Sport Gauge Readings
Changed
- Updated TCU torque limiter custom code for improved launch control handling (dependent on brake status)
- Logger file buffer size available only on customer support request - not required in normal use
- Adjust gauge's background overlay on iOS platform
- Custom uploaded logger variables are instantly available to log & display
- Epoch Time parameter added back to logger file
- Master & Slave module switch reinitialize the logger instantly
- Scroll view support for Register Page
- Logger can read 2-3 times more data than before
343
2022-06-25
Added
- Logger V2: Better performance and more UI features
Changed
- Adjusted TCU limiter option
- Resolved flashing issue on SWFL-3081-080.021.002 software
- New software version support for flashing options and logging:
- H4C996K6B 4ACF-030.160.006
- R2C9D3P7B 3E7D-030.140.007
- R2C9D3N5B 3E7D-030.030.005
- R2C9H5P7B 3E7D-050.190.007
- R2C9J7P7B 3E7D-070.090.007
- R2C9L8P7B 3E7D-080.072.007
- R4C9H5P7B 5D55-050.190.007
- R4C9J7P9B 5D55-070.090.009
- Corrected recognition of new 3E4B bootloaders
- Clipboard logger link will contain reference to the datalog & corresponding logger file too
- Logger V2: Better performance and more UI features
Changed
- Adjusted TCU limiter option
- Resolved flashing issue on SWFL-3081-080.021.002 software
- New software version support for flashing options and logging:
- H4C996K6B 4ACF-030.160.006
- R2C9D3P7B 3E7D-030.140.007
- R2C9D3N5B 3E7D-030.030.005
- R2C9H5P7B 3E7D-050.190.007
- R2C9J7P7B 3E7D-070.090.007
- R2C9L8P7B 3E7D-080.072.007
- R4C9H5P7B 5D55-050.190.007
- R4C9J7P9B 5D55-070.090.009
- Corrected recognition of new 3E4B bootloaders
- Clipboard logger link will contain reference to the datalog & corresponding logger file too
Способы взлома MG Flasher
- Промо коды и коды погашений (Получить коды)
Скачать взломанный APK файл
Скачать MG Flasher MOD APK
Запросить взлом
Рейтинг
4.6 из 5
84 Голосов
Отзывы
lilia222,
Нужны прострелы
Функционал, оперативность техподдержки, прибавка дикая, особенно на ст2. Но! Очень хочется прострелов при переключении!!! Почему у кого то они есть, а у кого то нет??? Исправьте пожалуйста
rust77777,
Удобно , нужен попкорн включил, нужна открытая заслонка будетвсегда открыта
Вообщем мне зашло , разница со стоком значительная, удобно использовать , можно менять настройки на ходу .
rhundv,
Добавьте Функция brab
Добавьте пожалуйста функцию brab как в MHD то есть при отпускание газа срабатывает кратковременный отстрел как на м4 но не при переключении передачи а при отпускании газа
И почему на MHD машина едет 8.5 сек 100-200 ? А на MGF 9.02 на Аи-100
И почему на MHD машина едет 8.5 сек 100-200 ? А на MGF 9.02 на Аи-100
Ns jacks,
Добавьте русский язык !!
Не хватает русского языка исправьте пожалуйста
!!!клиент!!!,
Русский язык добавьте
Русифицируйте пожалуйста!!!!!
Вовака,
Супер!
Отличная прошивка стала ещё лучше в последней версии. Теперь можно изменить мощность машины за 2 нажатия клавиши на руле. Можно ездить на лайт прошивке и за 3 секунды переключать на мощную прошивку при необходимости.
либрон джеймс,
Насос тнвд
Когда наконец то сделают чтобы TU насос на ст2+ заработал ?! Сколько можно ждать !!!!! Софт под него сделали , а дорабатывать кто будет ?
анон7483,
Хорошо)
Антилаг убил с десяток моторов, а так хорошо 🤣
Ardor tary,
Лучшее из того,что есть
Отличная прошивка. Дмитрий всегда ответит на любой вопрос, даже не по прошивке. Легкая установка, стабильная работа, возможность переключения между прошивками, хорошая поддержка. Все это переходит в 5 звёзд. Спасибо
ArthurZZZ,
320->340
320i 184 hp в стоке. Ставил mgf после jb4, на которой ездил с 20 до 95 ккм пробега. Потом зашил в mgf stage 1, по железу ничего не трогал. Разница в пользу mgf очень заметна. Отличная прошивка, ощущается так, будто машину для неё и проектировали. Хорошо согласуется с прошивкой коробки xHP stage 3, стабильна при разных температурах. В тёплую погоду валит уверенно, углы не кладёт. 100-200 14.5 сек.
Сейчас пробег 121 ккм, всё хорошо.
Сейчас пробег 121 ккм, всё хорошо.
