MHD F+G Series Взлом 4.11 + Чит Коды
Разработчик: MHD Tuning UG
Категория: Утилиты
Цена: Бесплатно
Версия: 4.11
ID: com.mhd.flasher.fgseries
Скриншоты
Описание
The MHD Flasher F+G Series is a complete flash tuning app for your BMW. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance,maximum safety, and unrivaled drivability.
---------------------------------------------
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F+G Series app that connects via a Wi-Fi adapter to your iOS device and your vehicle’s OBD-II port, start the app, and within 4 minutes the initial installation is complete. Further map changes are much faster - only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
---------------------------------------------
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:
N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
- Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
- Stage 2 (up to 390HP/580NM)
- Stage 2+ (up to 430HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
N55 PWG (pneumatic wastegate):
- Stage 1 (up to 340HP/540NM)
- Stage 2 (up to 370HP/580NM)
- Stage 2+ (up to 400HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
S55 (BMW M3 / M4 F8x):
- Stage 1 (up to 530HP/700NM)
- Stage 2 (up to 560HP/780NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%
B58:
- Stage 1 (up to 420HP/580NM)
- Stage 2 (up to 470HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%
---------------------------------------------
Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
These are some of the available monitors:
- Boost, Boost Target
- Lambda (AFR)
- Intake Air Temp (IAT)
- Ignition Timing per Cylinder
- Coolant Temperature
- Oil Temperature, Oil Pressure
- Transmission Temperature
- High Pressure Fuel Pump (HPFP)
- Throttle Position
- Wastegate Duty-Cycle (WGDC)
- RPM
- Speed
- EGT
And many more…
MHD exclusive advanced monitor:
- Timing Corrections per Cylinder
- Boost target EX which can read higher than 22.x psi (the BMW boost target channel can't)
- Base Compressor Axis: Boost Setpoint, MAF req WGDC.
- Active Torque Limiters
And many more…
---------------------------------------------
These flash options can be applied to any map directly through the app:
- Exhaust Burble (duration & aggressiveness, min speed, min rpm)
- N20 Map Sensor (on N55)
- Remove top speed limiter (Vmax)
- Cold start noise reduction
- Exhaust flap open in sport mode
- Limit power per gear
- XHP TCU flash support (optimizied OTS maps)
- Sport cooling mode for increased water / air intercooler cooling (B58 only)
---------------------------------------------
Supported Cars:
M135i F2x N55 2012 - 2016
M235i F2x N55 2013 - 2016
M2 F87 N55 2015 - 2018
335i N55 F3x 2011 - 2015
435i N55 F3x 2013 - 2016
535i / GT N55 F1x 2010 - 2017
640i N55 F0x 2011 - 2017
740i N55 F0x 2012 - 2015
X3 35i N55 F25 2010 - 2017
X4 35i / M40i N55 F26 2014 - 2018
X5 40i N55 F15 2013 - 2018
X6 40i N55 F16 2014 - 2018
M3 S55 F80 2014 - 2019
M4 S55 F82 2014 - 2019
M4 S55 F83 2014 - 2019
M140i F2x 2012 - 2019
M240i F2x 2016 - 2019
340i F3x 2015 - 2019
440i F3x 2016 - 2019
540i G3x 2017 -
640i GT G32 2017 -
740i G1x F0x 2015 -
X3 M40i G01 2017 -
X4 M40i G02 2018 -
X5 40i G05 2018 -
Z4 M40i G29 2019 -
114i F2x 2012 - 2015
116i F2x 2011 - 2015
118i F2x 2011 - 2016
120i F2x 2015 - 2017
316i F3x 2012 - 2018
X-Drive is supported on all cars.
All performance power kit cars are supported.
Check out our homepage / user manual for more information and recommended modifications for each stage.
---------------------------------------------
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F+G Series app that connects via a Wi-Fi adapter to your iOS device and your vehicle’s OBD-II port, start the app, and within 4 minutes the initial installation is complete. Further map changes are much faster - only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
---------------------------------------------
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:
N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
- Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
- Stage 2 (up to 390HP/580NM)
- Stage 2+ (up to 430HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
N55 PWG (pneumatic wastegate):
- Stage 1 (up to 340HP/540NM)
- Stage 2 (up to 370HP/580NM)
- Stage 2+ (up to 400HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
S55 (BMW M3 / M4 F8x):
- Stage 1 (up to 530HP/700NM)
- Stage 2 (up to 560HP/780NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%
B58:
- Stage 1 (up to 420HP/580NM)
- Stage 2 (up to 470HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%
---------------------------------------------
Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
These are some of the available monitors:
- Boost, Boost Target
- Lambda (AFR)
- Intake Air Temp (IAT)
- Ignition Timing per Cylinder
- Coolant Temperature
- Oil Temperature, Oil Pressure
- Transmission Temperature
- High Pressure Fuel Pump (HPFP)
- Throttle Position
- Wastegate Duty-Cycle (WGDC)
- RPM
- Speed
- EGT
And many more…
MHD exclusive advanced monitor:
- Timing Corrections per Cylinder
- Boost target EX which can read higher than 22.x psi (the BMW boost target channel can't)
- Base Compressor Axis: Boost Setpoint, MAF req WGDC.
- Active Torque Limiters
And many more…
---------------------------------------------
These flash options can be applied to any map directly through the app:
- Exhaust Burble (duration & aggressiveness, min speed, min rpm)
- N20 Map Sensor (on N55)
- Remove top speed limiter (Vmax)
- Cold start noise reduction
- Exhaust flap open in sport mode
- Limit power per gear
- XHP TCU flash support (optimizied OTS maps)
- Sport cooling mode for increased water / air intercooler cooling (B58 only)
---------------------------------------------
Supported Cars:
M135i F2x N55 2012 - 2016
M235i F2x N55 2013 - 2016
M2 F87 N55 2015 - 2018
335i N55 F3x 2011 - 2015
435i N55 F3x 2013 - 2016
535i / GT N55 F1x 2010 - 2017
640i N55 F0x 2011 - 2017
740i N55 F0x 2012 - 2015
X3 35i N55 F25 2010 - 2017
X4 35i / M40i N55 F26 2014 - 2018
X5 40i N55 F15 2013 - 2018
X6 40i N55 F16 2014 - 2018
M3 S55 F80 2014 - 2019
M4 S55 F82 2014 - 2019
M4 S55 F83 2014 - 2019
M140i F2x 2012 - 2019
M240i F2x 2016 - 2019
340i F3x 2015 - 2019
440i F3x 2016 - 2019
540i G3x 2017 -
640i GT G32 2017 -
740i G1x F0x 2015 -
X3 M40i G01 2017 -
X4 M40i G02 2018 -
X5 40i G05 2018 -
Z4 M40i G29 2019 -
114i F2x 2012 - 2015
116i F2x 2011 - 2015
118i F2x 2011 - 2016
120i F2x 2015 - 2017
316i F3x 2012 - 2018
X-Drive is supported on all cars.
All performance power kit cars are supported.
Check out our homepage / user manual for more information and recommended modifications for each stage.
История обновлений
4.11
2023-08-01
- Added No-Lift-Shift (NLS) flash option for 6MT Gen1 B58 cars.
- Added PI Safety (coil cut) flash option for Gen1 B58 cars.
- Fixed 1F1AA4 shadow code on Gen1 B58.
- Added G8x "Shift Brap" flash option to increase 8AT shift performance and adds shift noise.
- Added XDi +75% injectors flash option for Gen1 B58 cars.
- Added support for alternate CAN ID for ReFlex integration on Gen1 B58 (required on some Gen1 G-series vehicles, consult with your tuner).
- More vehicles / roms supported, plus advanced logging params for more roms.
- Added PI Safety (coil cut) flash option for Gen1 B58 cars.
- Fixed 1F1AA4 shadow code on Gen1 B58.
- Added G8x "Shift Brap" flash option to increase 8AT shift performance and adds shift noise.
- Added XDi +75% injectors flash option for Gen1 B58 cars.
- Added support for alternate CAN ID for ReFlex integration on Gen1 B58 (required on some Gen1 G-series vehicles, consult with your tuner).
- More vehicles / roms supported, plus advanced logging params for more roms.
4.09
2023-05-25
- Fixed bug when Brap flash option was set to OEM on Gen1 B58.
- More vehicles / roms supported, plus advanced logging params for more roms.
- More vehicles / roms supported, plus advanced logging params for more roms.
4.07
2023-05-23
- Added ability to live adjust current map slot / exhaust flap in-app for all F-N55/S55/Gen1 B58.
- Added TCU gearbox limiter delete flash option for S63 and S58 pre 6.2020 DMEs / cloned DMEs.
- Fixed burble consistency on some Gen2 B58 roms.
- Fixed issue with EU5 / Nostrum injector flash options when used with multimap and / or flexfuel tunes.
- Check Unlock screen can now detect (most cases) of already unlocked Gen1 B58 DMEs.
- Fixed user guide not opening / crashing some devices.
- More vehicles / roms supported, plus advanced logging params for more roms.
- Added TCU gearbox limiter delete flash option for S63 and S58 pre 6.2020 DMEs / cloned DMEs.
- Fixed burble consistency on some Gen2 B58 roms.
- Fixed issue with EU5 / Nostrum injector flash options when used with multimap and / or flexfuel tunes.
- Check Unlock screen can now detect (most cases) of already unlocked Gen1 B58 DMEs.
- Fixed user guide not opening / crashing some devices.
- More vehicles / roms supported, plus advanced logging params for more roms.
4.06
2023-03-29
- Added No-Lift-Shift (NLS) flash option for 6MT N55 and S55 cars.
- Added PI Safety (coil cut) flash option for N55 and S55 cars.
- Added Nostrum / PR Stage 2 injectors flash option for N55 and S55 cars.
- Added PI Safety (coil cut) flash option for N55 and S55 cars.
- Added Nostrum / PR Stage 2 injectors flash option for N55 and S55 cars.
4.05
2023-03-18
- Added M2 N55 Stg HPFP maps.
- Added single bank fueling flash option for single turbo S55 cars.
- Added automatic start/stop (MSA) disable flash option for b58gen1, N55, S55, N13, S63 f10/f85
- Added easy import of custom log channels files (provided by tuner or MHD team).
- Updated N55 Dorch HPFP settings.
- Added advanced RAM logging support for more roms.
- Fixed N55 EWG Stg2 HPFP MultiMap app crash when flexfuel is active.
- Fixed S55 OPF delete 1A2809 code.
- Added single bank fueling flash option for single turbo S55 cars.
- Added automatic start/stop (MSA) disable flash option for b58gen1, N55, S55, N13, S63 f10/f85
- Added easy import of custom log channels files (provided by tuner or MHD team).
- Updated N55 Dorch HPFP settings.
- Added advanced RAM logging support for more roms.
- Fixed N55 EWG Stg2 HPFP MultiMap app crash when flexfuel is active.
- Fixed S55 OPF delete 1A2809 code.
4.04
2023-03-16
- Added M2 N55 Stg HPFP maps.
- Added single bank fueling flash option for single turbo S55 cars.
- Added automatic start/stop (MSA) disable flash option for b58gen1, N55, S55, N13, S63 f10/f85
- Added easy import of custom log channels files (provided by tuner or MHD team).
- Updated N55 Dorch HPFP settings.
- Added advanced RAM logging support for more roms.
- Fixed N55 EWG Stg2 HPFP MultiMap app crash when flexfuel is active.
- Fixed S55 OPF delete 1A2809 code.
- Added single bank fueling flash option for single turbo S55 cars.
- Added automatic start/stop (MSA) disable flash option for b58gen1, N55, S55, N13, S63 f10/f85
- Added easy import of custom log channels files (provided by tuner or MHD team).
- Updated N55 Dorch HPFP settings.
- Added advanced RAM logging support for more roms.
- Fixed N55 EWG Stg2 HPFP MultiMap app crash when flexfuel is active.
- Fixed S55 OPF delete 1A2809 code.
4.01
2023-02-09
- Fixed S55 OTS maps rail pressure issue
- Added support for B58 gen1 Femto unlocks (USA m240)
- Fixed various B58 gen2 log channels
- Fixed some issues with F-N55 BRAP
- Added specific maps for F90 with bigger OEM turbos
- Added support for B58 gen1 Femto unlocks (USA m240)
- Fixed various B58 gen2 log channels
- Fixed some issues with F-N55 BRAP
- Added specific maps for F90 with bigger OEM turbos
3.99
2023-01-14
- Remote start fix on M5/M8.
- Updated UNI firmware with multiple improvements.
- N55 maps update (flat STFT fix).
- Added N55 EWG stage 2 hpfp maps (93/95/e40/e85).
- Added M2 N55 PS2 stock fueling pump gas maps.
- Added logging channels for s63,s58, added usefull channels to the default selection like TQ and RF Max Index.
- Fixed some "failed to authenticate" instances on recent cars.
- Updated UNI firmware with multiple improvements.
- N55 maps update (flat STFT fix).
- Added N55 EWG stage 2 hpfp maps (93/95/e40/e85).
- Added M2 N55 PS2 stock fueling pump gas maps.
- Added logging channels for s63,s58, added usefull channels to the default selection like TQ and RF Max Index.
- Fixed some "failed to authenticate" instances on recent cars.
3.96
2022-11-23
- Remote start fix for B58 gen2.
- Added ability to start app on logging screen.
- Added ability to start app on logging screen.
3.94
2022-11-14
- Fixed power slider issue with OTS multimap.
3.93
2022-11-09
- N13 maps update.
- Fixed S55 C.S and G.T.S maps not loading.
- Added flash option to disable MHD+ steering wheel / BC button controls for F-N55/S55 and Gen1 B58.
- Updated power slider to work properly with OTS maps using FlexFuel kit.
- Fixed S55 C.S and G.T.S maps not loading.
- Added flash option to disable MHD+ steering wheel / BC button controls for F-N55/S55 and Gen1 B58.
- Updated power slider to work properly with OTS maps using FlexFuel kit.
3.92
2022-09-30
- B58tu M1 (Supra, z4 g29 euro, g05 etc) maps update: improved load target curve and boost control, improved overboost on shifts for some roms.
- N13 maps update: improved load target curve and boost control
- F10/F95 s63 maps update: WGDC adjustments
- Fixed a map switch issue on some N55 PWG cars.
- N13 maps update: improved load target curve and boost control
- F10/F95 s63 maps update: WGDC adjustments
- Fixed a map switch issue on some N55 PWG cars.
3.90
2022-09-17
- F90 maps update 1.03, better boost control and more power from 5000rpm.
- Misc connectivity bug fixes.
- Misc connectivity bug fixes.
3.88
2022-09-14
- F90 maps update 1.03, better boost control and more power from 5000rpm.
- Misc connectivity bug fixes.
- Misc connectivity bug fixes.
3.87
2022-08-23
- B58 gen1 pump maps revision 3.5 (improved stft, optimized ignition timing).
- Added flash option to keep iDrive Power/Torque gauges OEM.
- B58 gen1 burble aggressiveness settings reworked.
- More f90 and b58tu roms supported.
- Added flash option to keep iDrive Power/Torque gauges OEM.
- B58 gen1 burble aggressiveness settings reworked.
- More f90 and b58tu roms supported.
3.86
2022-08-19
- B58 gen1 pump maps revision 3.5 (improved stft, optimized ignition timing).
- Added flash option to keep iDrive Power/Torque gauges OEM.
- B58 gen1 burble aggressiveness settings reworked.
- More f90 and b58tu roms supported.
- Added flash option to keep iDrive Power/Torque gauges OEM.
- B58 gen1 burble aggressiveness settings reworked.
- More f90 and b58tu roms supported.
3.83
2022-06-21
- added B58 gen1 Stg2+ HPFP MultiMap and FlexFuel support
- added B58 gen1 MPPSK burble as OEM setting
- misc bug fixes
- added B58 gen1 MPPSK burble as OEM setting
- misc bug fixes
3.82
2022-04-29
- Added MHD+ custom code version check when starting Monitor or Read Codes. You will be alerted if you should reflash to update.
3.81
2022-04-22
- Added MHD+ Menu for S55 and F-N55, which brings on the fly exhaust flap control and ethanol percentage display (when using a CANBUS enabled ethanol content analyzer (ECA)).
- S55 map update (v1.11): fixed rich AFR occurences, load slightly decreased for e85 stg2/2+ maps (injector limit).
- S63 F10/X5m beta map update (v1.08): fixed rich AFR occurences.
- N55 updated Dorch HPFP settings.
- Gen1 B58 fixed occasional issues with ECA timeouts.
- S55 map update (v1.11): fixed rich AFR occurences, load slightly decreased for e85 stg2/2+ maps (injector limit).
- S63 F10/X5m beta map update (v1.08): fixed rich AFR occurences.
- N55 updated Dorch HPFP settings.
- Gen1 B58 fixed occasional issues with ECA timeouts.
3.80
2022-04-21
- Added MHD+ Menu for S55 and F-N55, which brings on the fly exhaust flap control and ethanol percentage display (when using a CANBUS enabled ethanol content analyzer (ECA)).
- S55 map update (v1.11): fixed rich AFR occurences, load slightly decreased for e85 stg2/2+ maps (injector limit).
- S63 F10/X5m beta map update (v1.08): fixed rich AFR occurences.
- N55 updated Dorch HPFP settings.
- Gen1 B58 fixed occasional issues with ECA timeouts.
- S55 map update (v1.11): fixed rich AFR occurences, load slightly decreased for e85 stg2/2+ maps (injector limit).
- S63 F10/X5m beta map update (v1.08): fixed rich AFR occurences.
- N55 updated Dorch HPFP settings.
- Gen1 B58 fixed occasional issues with ECA timeouts.
3.71
2022-03-19
- Added MHD+ Menu for Gen1 B58, which brings on the fly exhaust flap control and ethanol percentage display (when using a CANBUS enabled ethanol content analyzer (ECA) or FlexFuel kit).
- Fixed issue with BRAP on OPF model Gen1 B58s.
- Fixed issue with BRAP on OPF model Gen1 B58s.
3.70
2022-03-16
- Added MHD+ Menu for Gen1 B58, which brings on the fly exhaust flap control and ethanol percentage display (when using a CANBUS enabled ethanol content analyzer (ECA) or FlexFuel kit).
- Fixed issue with BRAP on OPF model Gen1 B58s.
- Fixed issue with BRAP on OPF model Gen1 B58s.
3.68
2022-03-05
- Added BRAP flash option for Gen1 B58.
- Fixed issue with wheel buttons (up/down) data on some Gen1 G series.
- Improved antilag take-off performance for Gen1 B58.
- Restored transmission selection choice and added TCU TQ Lim delete as a flash option for Gen1 B58.
- Fixed issue with wheel buttons (up/down) data on some Gen1 G series.
- Improved antilag take-off performance for Gen1 B58.
- Restored transmission selection choice and added TCU TQ Lim delete as a flash option for Gen1 B58.
3.67
2022-03-03
- Added BRAP flash option for Gen1 B58.
- Fixed issue with wheel buttons (up/down) data on some Gen1 G series.
- Improved antilag take-off performance for Gen1 B58.
- Restored transmission selection choice and added TCU TQ Lim delete as a flash option for Gen1 B58.
- Fixed issue with wheel buttons (up/down) data on some Gen1 G series.
- Improved antilag take-off performance for Gen1 B58.
- Restored transmission selection choice and added TCU TQ Lim delete as a flash option for Gen1 B58.
3.66
2022-02-05
- Fixed "Overrun Brap" not being installed if no other MHD+ feature (like antilag) is active.
- Fixed map switch burble issue when the burble flash option was toggled off.
- Added "Brap Active" logging parameter.
- Fixed map switch burble issue when the burble flash option was toggled off.
- Added "Brap Active" logging parameter.
Способы взлома MHD F+G Series
- Промо коды и коды погашений (Получить коды)
Скачать взломанный APK файл
Скачать MHD F+G Series MOD APK
Запросить взлом
Рейтинг
4.6 из 5
15 Голосов
Отзывы
Макс Lowsky,
RPM adjustment for N55 F series
Dear MHD Team, could you please add setting for idle rpm adjustment to N55 F series, just like on N55 E series with next update…
Thank you 😉
Thank you 😉
--------тим,
air intake duct
Please, add remote air intake duct for bmw g01
blyumazeiko,
Супер
Все отлично, удобно и гибко. Просьба добавить русский
Muzred,
Thank goodness-it is out!!
Guys! You are awesome!
iva_k_v,
Ron95 for n13/ the scales of sports devices do not change
Hello!
1. Please add maps st1/st2 for ron95 for the n13 engine.
2. When recording st2, the scales of sports devices do not change. The maximum values are 240hp 320nm while the ST2 claims 235hp 350nm. It was good to expand them to 300hp and 400nm.
1. Please add maps st1/st2 for ron95 for the n13 engine.
2. When recording st2, the scales of sports devices do not change. The maximum values are 240hp 320nm while the ST2 claims 235hp 350nm. It was good to expand them to 300hp and 400nm.
