MHD Flasher N54 Взлом 3.20 + Чит Коды
Разработчик: MHD Tuning UG
Категория: Утилиты
Цена: Бесплатно
Версия: 3.20
ID: com.mhd.flasher.n54
Скриншоты
Описание
MHD Flasher is the first mobile application to bring ECU tuning and monitoring to the BMW N54 engine. The MHD Flasher reveals the immense margin of power BMW left on the table with the N54 while still retaining the sophistication of the original engine management program.
- Easy to install
Connect any compatible iOS device to your car using a MHD Wifi adapter, install one of the pre-purchased MHD maps and enjoy the power and performance benefits of the MHD maps by Wedge Performance.
- Keep an eye on the tuning
Monitor your engine behavior using a configurable gauges layout to keep an eye on any of the 50+ engine monitors like oil temp, boost pressure, actual load or individual cylinder ignition timing. Activate the logging mode to save up to 30 monitors to a standard CSV file for later analysis. Track issues by reading the error codes, and delete them once resolved.
- Flash your ECU back to a stock anytime, as often as you need to. No ECU backup is needed.
- Custom tuning support
As an alternative to built-in maps, many tuners can provide advanced custom mapping for those who have higher or special performance needs.
Main features description:
* Flasher module *
- Flash built-in maps (purchased separately), piggyback backend maps or custom user-tuned .BIN files.
- Backup up the stock ECU software, as fast as 3 seconds on most of the cars.
- Provides handy options like power limiter per gear, wastegate rattle fix or exhaust burble settings.
- Read / delete engine trouble codes.
- Reset adaptation values (Lambda, Fuel/air, Octane rating, VANOS, Throttle, and Battery).
- 1 minutes map switching; initial install time: 18 minutes.
* Monitor module *
- Extensive logging values list, up to 30 values at the same time.
- Save logging session to .CSV files
- Integrated csv log viewer
- Up to 8 configurable gauges
- Automatic or manual log session start
- Configurable gauge alerts
* Optional MHD maps packs *
- Maps by Wedge Performance
- Stage 1 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants.
- Stage 2 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants. High flow downpipes recommended.
- Ethanol mix pack. Three maps (e25, e40 and e60), FMIC+DPs recommended. Upgraded fuel pump for the e60.
Supported vehicles:
2006-2010 135i, 335i and 535i
2011-2013 335is
2009-2015 Z4 35i/is
2011-2012 1M
2008-2010 X6 35i
This racing product is for competition closed course use only.
Required hardware:
- 1 device running iOS 10.2 and up.
- 1 orange MHD wifi adapter
- Easy to install
Connect any compatible iOS device to your car using a MHD Wifi adapter, install one of the pre-purchased MHD maps and enjoy the power and performance benefits of the MHD maps by Wedge Performance.
- Keep an eye on the tuning
Monitor your engine behavior using a configurable gauges layout to keep an eye on any of the 50+ engine monitors like oil temp, boost pressure, actual load or individual cylinder ignition timing. Activate the logging mode to save up to 30 monitors to a standard CSV file for later analysis. Track issues by reading the error codes, and delete them once resolved.
- Flash your ECU back to a stock anytime, as often as you need to. No ECU backup is needed.
- Custom tuning support
As an alternative to built-in maps, many tuners can provide advanced custom mapping for those who have higher or special performance needs.
Main features description:
* Flasher module *
- Flash built-in maps (purchased separately), piggyback backend maps or custom user-tuned .BIN files.
- Backup up the stock ECU software, as fast as 3 seconds on most of the cars.
- Provides handy options like power limiter per gear, wastegate rattle fix or exhaust burble settings.
- Read / delete engine trouble codes.
- Reset adaptation values (Lambda, Fuel/air, Octane rating, VANOS, Throttle, and Battery).
- 1 minutes map switching; initial install time: 18 minutes.
* Monitor module *
- Extensive logging values list, up to 30 values at the same time.
- Save logging session to .CSV files
- Integrated csv log viewer
- Up to 8 configurable gauges
- Automatic or manual log session start
- Configurable gauge alerts
* Optional MHD maps packs *
- Maps by Wedge Performance
- Stage 1 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants.
- Stage 2 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants. High flow downpipes recommended.
- Ethanol mix pack. Three maps (e25, e40 and e60), FMIC+DPs recommended. Upgraded fuel pump for the e60.
Supported vehicles:
2006-2010 135i, 335i and 535i
2011-2013 335is
2009-2015 Z4 35i/is
2011-2012 1M
2008-2010 X6 35i
This racing product is for competition closed course use only.
Required hardware:
- 1 device running iOS 10.2 and up.
- 1 orange MHD wifi adapter
История обновлений
3.20
2023-01-14
- Added OTS Multimap for V8/9/10.
- Added per map burble flash options for multimap.
- Added Single Bank fueling flash option for single turbo cars (see notes in-app).
- Added 3-port MAC control flash option (see notes in-app).
- Updated UNI firmware with multiple improvements.
- Added per map burble flash options for multimap.
- Added Single Bank fueling flash option for single turbo cars (see notes in-app).
- Added 3-port MAC control flash option (see notes in-app).
- Updated UNI firmware with multiple improvements.
3.12
2022-12-13
- Added flash option for NXM Oil Pressure.
- Added ability to start app on logging screen.
- Fixed airflow error code on I8A0S v10 maps.
- Added ability to start app on logging screen.
- Fixed airflow error code on I8A0S v10 maps.
3.10
2022-09-14
- Misc connectivity bug fixes.
3.09
2022-08-30
- Further improvements to burble settings.
- Further improvements to throttle lift smoothness.
- Lambda / throttle oscillation fix moved to separate flash option once "aftermarket DP" is selected.
- Fixed license issue with FlexFuel enabled BEF.
- Misc other bug fixes, please reflash your current tune.
- Further improvements to throttle lift smoothness.
- Lambda / throttle oscillation fix moved to separate flash option once "aftermarket DP" is selected.
- Fixed license issue with FlexFuel enabled BEF.
- Misc other bug fixes, please reflash your current tune.
3.05
2022-07-15
- Fixed issues with burble duration and aggression.
- Fixed issue with boost per gear flash option when used with a FlexFuel enabled tune.
- Added flash option to prevent radio/iDrive auto off/on when mapswitching with wheel buttons.
- Fixed issue with gauge parameter picker list scrolling.
- Fixed issue with JB4 FlexFuel BEF reading E% incorrectly.
- Misc other bug fixes, please reflash your current tune.
- Fixed issue with boost per gear flash option when used with a FlexFuel enabled tune.
- Added flash option to prevent radio/iDrive auto off/on when mapswitching with wheel buttons.
- Fixed issue with gauge parameter picker list scrolling.
- Fixed issue with JB4 FlexFuel BEF reading E% incorrectly.
- Misc other bug fixes, please reflash your current tune.
3.03
2022-07-02
- Fix issue with jerkiness when lifting throttle.
3.02
2022-07-01
- Fix issue with antilag flash option timing.
3.00
2022-06-30
- Added full suite of MHD+ features (antilag, map switching, CANBUS ECA support, ReFlex integration, etc).
- Reworked burble to use same ignition timing method as OEM Z4 35is.
- Fixed throttle / lambda oscillation for all flashes when "aftermarket DP" is selected.
- Prevent STFT freeze and STFT open loop for all flashes.
- Reworked burble to use same ignition timing method as OEM Z4 35is.
- Fixed throttle / lambda oscillation for all flashes when "aftermarket DP" is selected.
- Prevent STFT freeze and STFT open loop for all flashes.
2.42
2022-03-24
- Fixed MHD N54 folder not showing in Files app on latest iOS updates.
2.41
2022-01-13
- OTS maps v10.0
2.40
2022-01-12
- OTS maps v10.0
2.33
2021-10-27
- Improved login handling.
- Misc bug fixes.
- Misc bug fixes.
2.31
2021-10-07
- Fixed a rare case (introduced in the last build) of long flash needed but not detected.
2.30
2021-09-28
- 1M throttle sensitivity flash option slider.
- Improved MBoost code for boost ceiling > 1.28bar (now usable on DCT, and AT will shift better).
- Monitor allow more lag on Wifi to avoid reconnecting.
- Local network permission check for iOS 14+.
- Ability to send debug logs automatically.
- Display last login email and method.
- Improved MBoost code for boost ceiling > 1.28bar (now usable on DCT, and AT will shift better).
- Monitor allow more lag on Wifi to avoid reconnecting.
- Local network permission check for iOS 14+.
- Ability to send debug logs automatically.
- Display last login email and method.
2.25
2021-08-11
- Bug fix for Live MAX Cooling
2.24
2021-08-09
- Bug fix for FlexFuel flash option
2.23
2021-08-05
- Support for Thor adapter rev2
- Improved wifi connection
- Improved wifi connection
2.22
2021-02-16
- Added NXM B58 coil option (http://nexsysmotorsport.com)
- V9.0 Maps exited beta (no map change)
- Added FR and SP descriptions for error codes
- Share to DataZap auto launches website
- V9.0 Maps exited beta (no map change)
- Added FR and SP descriptions for error codes
- Share to DataZap auto launches website
2.21
2020-07-24
- Fixed issue with MAX Cool not activating under certain conditions
2.20
2020-07-17
- Added new gauge style: "Bar". Change in Monitor Options -> Config -> Gauge Style
- Added "time" and "map name" to graph log viewer
- Added "time" and "map name" to graph log viewer
2.10
2020-07-01
- Added separate toggle for burble in standstill
- Completely updated User Guide
- Completely updated User Guide
2.06
2020-06-12
PLEASE READ: OTS Map FlexFuel users must now select the flash option for "Motiv FlexFuel kit installed" in order to use the custom feature. If you are currently running FlexFuel and do not select the checkbox on your next flash, the FF logic will be removed. All previous requirements remain: you must own the pump gas map pack, ethanol map pack, and FF license (or super license), and flash a V8 or higher pump gas (not ethanol) map, but now also with the flash option checked. This flash option checkbox will only be visible if you own the correct licenses and are flashing the correct OTS map. There are no changes for custom FF tunes (flash option hidden as it is not needed).
2.05
2020-06-06
- fixed crashes on Turkish locale devices
- combined My Vehicles and License Store into one page: My Licenses
- added and improved more text to help with login, licenses, etc
- combined My Vehicles and License Store into one page: My Licenses
- added and improved more text to help with login, licenses, etc
2.03
2020-05-23
- fix bug with gauge min/max resetting prematurely
- improve scroll when config options is expanded
- improve error handling and bug reporting
- improve scroll when config options is expanded
- improve error handling and bug reporting
2.02
2020-05-21
- fix scroll issue when changing gauge parameter in landscape view
- fix "spinning indefinitely" when user does not have correct license
- improved error tracking and crash handling
- add min/max to gauge face (can toggle off in monitor > config options)
- swipe up or down on a gauge face to reset min/max
- make monitor config options scrollable when expanded
- sort .bin and .mhd files by date, descending
- fix max cool for cars it wasn't work on
- fix "spinning indefinitely" when user does not have correct license
- improved error tracking and crash handling
- add min/max to gauge face (can toggle off in monitor > config options)
- swipe up or down on a gauge face to reset min/max
- make monitor config options scrollable when expanded
- sort .bin and .mhd files by date, descending
- fix max cool for cars it wasn't work on
Способы взлома MHD Flasher N54
- Промо коды и коды погашений (Получить коды)
Скачать взломанный APK файл
Скачать MHD Flasher N54 MOD APK
Запросить взлом
Рейтинг
5 из 5
4 Голосов
