Blackmagic BlueConnect Hack 1.0.11 + Redeem Codes
Blackmagic Camera Control
Developer: Dean Lusk
Category: Photo & Video
Price: $5.99 (Download for free)
Version: 1.0.11
ID: com.bmblueconnect.camcontrol
Screenshots
Description
BlueConnect is simple yet powerful app to control Blackmagic Pocket Cinema Camera 4K, 6K or 6K Pro from iPhone or iPad.
BlueConnect allows you to control all the features of camera that Blackmagic offers, including :
- Colour Corrector :
• Built-in colour correction tools that reflects in camera and HDMI Output
• Davinci Resolve-like control
• RGB Bars for Lift, Gamma, Gain and Offset
• Pulling sliders for Contrast, Pivot, Saturation and Hue
• Ability to reset to default camera colour correction settings
• Similar settings that can be controlled from Atem Mini Pro switchers
- Other devices support :
• Control from Tilta Nucleus-N handwheel - Start / Stop recording
• Control from Tilta Nucleus-M FIZ Unit - Start / Stop recording
- General controls :
• Trigger Start/Stop recording ( Ability to use Volume buttons )
• Trigger stills
• Battery indicator
• Active card indicator
• Remaining recording time
• Timecode
• Settings indicators
• Lock-while-recording mode
- Playback control :
• Switch from recording mode into playback and back ( displayed are only clips with same resolution )
• Play / Pause, navigate forward, navigate backward through clips
- White Balance controls :
• White Balance
• Tint
• WB Presets
- Exposure and Frame rate controls :
• Project frame rate
• Frame rate
• Off-speed frame rate toggle
• Iris
• Shutter speed / angle
• ISO
• Auto Exposure modes
- Focus control
• Slide-to-adjust control
• Multiple focus points (Rack focus using focus sensitivity and duration)
• Multiple focus points (Rack focus using focus-movement teaching)
• Auto-focus toggle
- Monitor overlays
• Zebra Level
• Frame guides
• Safe Area
• Grids
• Exposure and focus tools (zebra, focus assist and false color toggles)
- Codecs and Quality
• Codec option
• Bitrate option
• Resolution
- Audio controls
• Channel 1 / 2 gain
• Headphones volume
• Speaker volume
We continue to work on another exciting features to be released in the near future including but not limited to :
- MultiCam mode with an option to trigger recording on multiple cameras
- Control of TILTA products
Requirements:
- Minimum Camera Firmware version 6.2
- Bluetooth Enabled on your Camera
- Bluetooth Enabled on your Phone
- Location Enabled on your Phone
Tested on:
– BMPCC 4K
– BMPCC 6K
- BMPCC 6K Pro
Getting started :
https://bmblueconnect.com/getting-started
Issues we know about :
https://bmblueconnect.com/known-issues
Troubleshooting :
https://bmblueconnect.com/troubleshooting
BlueConnect allows you to control all the features of camera that Blackmagic offers, including :
- Colour Corrector :
• Built-in colour correction tools that reflects in camera and HDMI Output
• Davinci Resolve-like control
• RGB Bars for Lift, Gamma, Gain and Offset
• Pulling sliders for Contrast, Pivot, Saturation and Hue
• Ability to reset to default camera colour correction settings
• Similar settings that can be controlled from Atem Mini Pro switchers
- Other devices support :
• Control from Tilta Nucleus-N handwheel - Start / Stop recording
• Control from Tilta Nucleus-M FIZ Unit - Start / Stop recording
- General controls :
• Trigger Start/Stop recording ( Ability to use Volume buttons )
• Trigger stills
• Battery indicator
• Active card indicator
• Remaining recording time
• Timecode
• Settings indicators
• Lock-while-recording mode
- Playback control :
• Switch from recording mode into playback and back ( displayed are only clips with same resolution )
• Play / Pause, navigate forward, navigate backward through clips
- White Balance controls :
• White Balance
• Tint
• WB Presets
- Exposure and Frame rate controls :
• Project frame rate
• Frame rate
• Off-speed frame rate toggle
• Iris
• Shutter speed / angle
• ISO
• Auto Exposure modes
- Focus control
• Slide-to-adjust control
• Multiple focus points (Rack focus using focus sensitivity and duration)
• Multiple focus points (Rack focus using focus-movement teaching)
• Auto-focus toggle
- Monitor overlays
• Zebra Level
• Frame guides
• Safe Area
• Grids
• Exposure and focus tools (zebra, focus assist and false color toggles)
- Codecs and Quality
• Codec option
• Bitrate option
• Resolution
- Audio controls
• Channel 1 / 2 gain
• Headphones volume
• Speaker volume
We continue to work on another exciting features to be released in the near future including but not limited to :
- MultiCam mode with an option to trigger recording on multiple cameras
- Control of TILTA products
Requirements:
- Minimum Camera Firmware version 6.2
- Bluetooth Enabled on your Camera
- Bluetooth Enabled on your Phone
- Location Enabled on your Phone
Tested on:
– BMPCC 4K
– BMPCC 6K
- BMPCC 6K Pro
Getting started :
https://bmblueconnect.com/getting-started
Issues we know about :
https://bmblueconnect.com/known-issues
Troubleshooting :
https://bmblueconnect.com/troubleshooting
Version history
1.0.11
2021-09-13
In the update 1.0.11 we implemented colour correction tools present in Atem Mini Pro switchers, added full 6K Pro support and we also fixed reported bugs :
- Bug fix where audio gain / speaker volume are offsetted by 1% after crossing 40% gain.
- General stability improvements
- Bug fix where audio gain / speaker volume are offsetted by 1% after crossing 40% gain.
- General stability improvements
1.0.7
2021-07-14
In the update 1.0.7. we implemented option to trigger recording with volume Up and Down buttons as well as external devices, we also fixed reported bugs :
- Bug fix where audio levels are not set correctly
- Bug fix where ISO would skip ISO100 value and go to ISO25600
- General stability improvements
- Bug fix where audio levels are not set correctly
- Bug fix where ISO would skip ISO100 value and go to ISO25600
- General stability improvements
1.0.6
2021-07-13
In the update 1.0.6. we implemented option to trigger recording with volume Up and Down buttons as well as external devices, we also fixed reported bugs :
- Bug fix where audio levels are not set correctly
- Bug fix where ISO would skip ISO100 value and go to ISO25600
- General stability improvements
- Bug fix where audio levels are not set correctly
- Bug fix where ISO would skip ISO100 value and go to ISO25600
- General stability improvements
1.0.5
2021-05-03
In the update 1.0.5. we implemented a changes to support Camera Update 7.3 and couple of enhancements inside the BlueConnect app in order to make it even more user friendly than before. These include :
- Added memory presets function
- Added support for Camera Update 7.3
- Added Q1 and Q3 recording variants
- General stability improvements
- Added memory presets function
- Added support for Camera Update 7.3
- Added Q1 and Q3 recording variants
- General stability improvements
1.0.4
2021-04-23
In the latest update 1.0.4. we implemented a couple of enhancements and general improvements inside the BlueConnect app to make it even faster and more reliable. These include :
- Added Triggering of stills from the app - can be found in White Balance screen
- Fixed bug where shutter speed didn't display correctly when framerate set to 24fps
- General stability improvements
- Added Triggering of stills from the app - can be found in White Balance screen
- Fixed bug where shutter speed didn't display correctly when framerate set to 24fps
- General stability improvements
1.0.3
2021-04-08
We update the BlueConnect app as often as possible to make it faster and more reliable for you. Here are a couple of the enhancements you'll find in the latest update:
- Playback Control
- Multi-Point Focus (focus transition between points based on either duration and sensitivity or teaching focus points)
- Camera model selector in the settings
- Focus sensitivity persistence
- Playback Control
- Multi-Point Focus (focus transition between points based on either duration and sensitivity or teaching focus points)
- Camera model selector in the settings
- Focus sensitivity persistence
1.0.1
2021-03-24
We update the BlueConnect app as often as possible to make it faster and more reliable for you. Here are a couple of the enhancements you'll find in the latest update:
- Exposure and focus tools (zebra, focus assist and false color toggles)
- performance improvements
- Exposure and focus tools (zebra, focus assist and false color toggles)
- performance improvements
1.0.0
2021-03-20
We update the app regularly so we can make it better for you. Get the latest version for all of the available features and improvements. Thanks for using BlueConnect!
0.0.15
2021-03-18
Ways to hack Blackmagic BlueConnect
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Blackmagic BlueConnect MOD APK
Request a Hack
Ratings
5 out of 5
3 Ratings
Reviews
dietwedge,
Fantastic!
Having purchased an used all of the available apps for controlling my Blackmagic cameras, BlueConnect is at the top of the list. The UI is identical to that of the cameras, so you should feel right at home. The ability to control your Tilta add ons is also a welcome addition. As far as I’m aware, this is the only app offering this functionality at this time. Two thumbs up here!
Viaswage,
Excellent app
I’ve tried other apps for remotely controlling the BMPCC 6k but none are as good as this.
