Blueye Hack 3.10.0 + Redeem Codes

- Add new interactive charts to explore dive log parameters directly from the app.
- Add the option to export the dive log as an Excel file with charts for all dive log parameters.
- Add support for AquaTROLL 500 multi-parameter environmental probe.
- Add a new app setting to display the remaining runtime of the drone battery instead of the percentage
- Display detailed battery information on the diagnostics page in the dive menu
- WaterLinked UGPS G2 and DVL A50 firmware version number is displayed on the navigation page in the dive menu

- New GPX dive log export file formats (requires DVL or positioning system)
- Improved calculation of minimum and maximum temperature
- Fix a bug where the dive log map would not show south of the equator
- Fix a bug when turning off video overlay when using the v3 communication protocol

- Add integration for Medusa Radiometrics Gamma Ray Sensor
- Add integration for scaling laser peripheral
- Ensure consistent letter casing on buttons
- Add workaround for IP mismatch in Oculus Sonar Firmware
- Prevent duplicate picture file name in generated reports

- Fix a bug where a Surface Unit battery level of 255 was displayed
- Add support for configuring Surface Units with firmware v2.2
- Fix a bug where a dive log would not update if you download it again after extending your dive

- Add functionality to map settings download a map extent for offline use
- Add an option to set a static heading when resetting the position of the DVL.
- Improve layout when increasing the iOS system font size

- Display controller battery in Controller Settings page
- Update the video streaming library to the latest version
- Improve video stream by reducing the use of location services
- Adjust static boost with d-pad left and right, making it possible to adjust static boost when a tiltable multibeam is connected
- Use Xbox Controller menu button to open and close the dive menu
- Display version information about the app under iOS settings
- Fix compass offset in 3D model, based on device orientation

- Fix a bug during the import of log files that were not closed gracefully on the drone
- Improve CSV import of points of interest
- Improve error reporting if uploading of dive logs fail
- Add support for station keeping with a DVL even if the GPS is disabled

- Minor bug fixes and stability improvements
- Display multibeam tilt angle in the status bar

- Add support for Oculus M750d Multibeam Sonar
- Add support for the new Blueye Rugged Controller
- Support for offline caching of custom map layers
- Issue warning if the user selects 2.4 GHz Wi-Fi frequency
- Option to include drone location in video overlay when diving with a positioning system

- Improved map when diving with a positioning system
- Ability to export and import KML and CSV files with points of interest when diving into a positioning system
- Convert HEIC image files to JPG when exporting from the dive log
- If the title and subtitle are set on the video overlay during a dive, these will be used as the default title and description in the dive log
- Includes altitude in CSV export if a DVL or altimeter is connected

- New control mode for position hold (requires DVL)
- New control mode for altitude hold (requires DVL or altimeter)
- New KML and KMZ dive log export file formats (requires DVL or positioning system)
- Add support for BlueRobotics Ping Sonar Altimeter
- Add support for WaterLinked DVL A50
- Add support for Cathodic Protection Probes
- Display Cygnus Thickness Gauge readings in dive log page
- Add option to delete dive logs from device
- Fix bug in calculation of packet loss in video stream
- Update video streaming library to latest version
- Add sort option to Dive Log list view

- Add touch control for grippers if connected
- Display an icon next to the recording timer to indicate if video overlay is enabled or not
- Update video streaming library to latest version
- Close material dropdown when navigating away from Cygnus Thickness Gauge menu
- Add support for the Blueye Deep Kit and the new Keller PA7LD depth sensor
- Display warning about Xbox Controller compatibility on older iOS versions
- Use triggers for boost and slow if Reach Alpha is disconnected from cable
- Add support for Tritech Micron Gemini Multibeam Sonar
- Add support for Blueye External Light Pair

- Add fix for a bug related to X3 drones running old versions of Blunux with a new device type connected
- Update video streaming library to latest version

- Improve readability of the logo synchronization question
- Fix bug related to Channel 44 warning message

- Ask the user before downloading or uploading a custom logo to the drone
- Use double-tap or the new camera setting to choose how to display the video on devices with a screen aspect ratio other than 16:9
- Fix a bug where the guest port information page would not refresh if the drone was rebooted with new equipment attached

- Add support for Xbox Elite Wireless Controller
- Add functionality to set a static slow or boost value
- New page with guest port information under drone settings
- Improve accuracy of touch sliders for boost and lights

- Fix bug related to determining if a remote software update is available or not

- Add support for Blueye External Camera on Blueye X3.
- Add support for Blueye External Lights on Blueye X3.
- Add support for Newton and Reach Alpha gripper on Blueye X3.
- Add support for guest ports on Blueye X3.
- Improve transfer speed when downloading drone software updates.
- Add metadata to notify iOS that the app supports game controllers, which will enable iOS controller button remapping.
- Add haptic feedback for touch interactions in dive view.
- Compress screenshots as JPG files instead of PNG.
- Warn user if sharing a report with more than 50 images.

- Fix a bug where the app would freeze when starting a dive on iPads running older version of iOS

- Fix a bug where the app would not save new temperature or depth unit settings.

- Add full support for running the iOS app on Apple M1 Macs.
- Add the ability to control the drone using the keyboard if it is connected.
- Add support for title and subtitle in video overlay.
- Add support for custom logo in video overlay, picture overlay, and generated reports.
- Better error handling during download of drone software update.

- Support for new language: Hindi.
- Fix bug where battery level in the status bar did not update during dive.
- Fix bug where the app would take a long time discovering the drone on the network.
- Improve diagnostics screen under in-dive settings.
- Add version compatibility checks between the Blueye App and the drone software.
- Ensure the app functions correctly if the user only grants restricted access to the Photos library in iOS 14.

- Add support for Adaptive Streaming, where the app will automatically adjust video bitrate for optimal performance.
- Check that mobile device, Surface Unit, and Blueye Drone has more than 25% battery before applying a software update.
- Prevent starting new recordings when storage is full.
- More accurate progress report when applying a software update.
- Fix issue of depth warning at wrong depth for Blueye Pro.

- To prevent accidentally turning on the lights you enable the option to hold one of the alt-buttons when dimming the lights using the controller d-pad buttons.
- New option to invert the vertical axis, for pilots who are used to flight simulators or other ROVs with this controller configuration.
- Enable or disable data overlay on video recordings.
- Change light intensity when operating the drone using touch controls.
- Change boost and slow mode when operating the drone using touch controls.
- Fix bug where the camera button icon became skewed in some situations.

- Support for new languages: Norwegian, German, and Spanish.
- Add functionality to toggle camera stabilization on/off for Blueye Pro drones by pressing the Mofidier+Y button.
- The app now includes pictures and videos downloaded from the drone in the dive log page.
- Share the complete dive log as a CSV file from the dive log page.
- Generate and export a report as a PDF or Word file from the dive log page.
- Create and import your custom report template under app settings.
- You can assign operator contact details to a dive log, which will be included in the report.
- Improvements to dive log page layout on iPad.
- Fix bug where you would get an error during log file sync.
- Fix bug where the Surface Unit Settings page could crash in certain configurations.