Circuitry - 3D Circuit Builder Hack 1.2.4 + Redeem Codes
Engineering made simple
Developer: Raffael Kaehn
Category: Education
Price: Free
Version: 1.2.4
ID: com.raffaelkaehn.circuitry
Screenshots
Description
Welcome to Circuitry - the world's first and only 3D circuit builder!
INSANELY FAST
Circuitry uses an optimized, GPU-accelerated network analysis algorithm that will blow your mind. It can calculate the voltages and currents of even the largest circuits in the blink of an eye - an insanely fast blinking eye!
SUPER DUPER EASY TO USE
While most circuit simulators are stuck in the stone age when it comes to usability, Circuitry takes you on a time-travel journey to the future. Its' 3D interface and intuitive controls will instantly feel familiar - no lengthy tutorials required.
DOCUMENT-BASED
Every circuit you build in Circuitry is a file. That way, they integrate perfectly into your existing files and can be used exactly the same way: you can duplicate and modify them, share them, and they are available to you on all your devices.
HOW TO USE:
1. Place components by dragging from the toolkit to the canvas.
2. Connect components by tapping the sides of the components in cabling mode.
3. Delete or modify components by long pressing on them.
AVAILABLE COMPONENTS:
- Resistor
- Voltage source
- Light bulb
INSANELY FAST
Circuitry uses an optimized, GPU-accelerated network analysis algorithm that will blow your mind. It can calculate the voltages and currents of even the largest circuits in the blink of an eye - an insanely fast blinking eye!
SUPER DUPER EASY TO USE
While most circuit simulators are stuck in the stone age when it comes to usability, Circuitry takes you on a time-travel journey to the future. Its' 3D interface and intuitive controls will instantly feel familiar - no lengthy tutorials required.
DOCUMENT-BASED
Every circuit you build in Circuitry is a file. That way, they integrate perfectly into your existing files and can be used exactly the same way: you can duplicate and modify them, share them, and they are available to you on all your devices.
HOW TO USE:
1. Place components by dragging from the toolkit to the canvas.
2. Connect components by tapping the sides of the components in cabling mode.
3. Delete or modify components by long pressing on them.
AVAILABLE COMPONENTS:
- Resistor
- Voltage source
- Light bulb
Version history
1.2.4
2023-03-09
- Bug fixes and performance improvements
1.2.3
2021-02-17
- Thanks to a new and improved network analysis algorithm, building circuits is now faster than ever!
- Added support for higher levels of anti-aliasing, making the graphics even better!
- Added a welcome screen and tutorial for first-time users
- Improved camera movement
- Added support for higher levels of anti-aliasing, making the graphics even better!
- Added a welcome screen and tutorial for first-time users
- Improved camera movement
1.2.2
2020-10-13
- Thanks to a new and improved network analysis algorithm, building circuits is now faster than ever!
- Added support for higher levels of anti-aliasing, making the graphics even better!
- Added a welcome screen and tutorial for first-time users
- Improved camera movement
- Added support for higher levels of anti-aliasing, making the graphics even better!
- Added a welcome screen and tutorial for first-time users
- Improved camera movement
1.2.1
2020-04-19
- Thanks to a new and improved network analysis algorithm, building circuits is now faster than ever!
- Added support for higher levels of anti-aliasing, making the graphics even better!
- Added a welcome screen and tutorial for first-time users
- Added support for higher levels of anti-aliasing, making the graphics even better!
- Added a welcome screen and tutorial for first-time users
1.2
2020-02-09
- Added a welcome screen and tutorial for first-time users
1.1.1
2020-02-08
- Cabling mode now features a top-down view making it much easier to connect components
- Adjusted the speed of rotating, panning and zooming the camera to make it more uniform across differently-sized devices
- Fixed bug that caused the app to crash when the current flowing through a component was higher than 1000 mega amps
- Fixed bug that allowed the interface to rotate unexpectedly
- Adjusted the speed of rotating, panning and zooming the camera to make it more uniform across differently-sized devices
- Fixed bug that caused the app to crash when the current flowing through a component was higher than 1000 mega amps
- Fixed bug that allowed the interface to rotate unexpectedly
1.1
2019-10-16
- Cabling mode now features a top-down view making it much easier to connect components
- Adjusted the speed of rotating, panning and zooming the camera to make it more uniform across differently-sized devices
- Fixed bug that caused the app to crash when the current flowing through a component was higher than 1000 mega amps
- Adjusted the speed of rotating, panning and zooming the camera to make it more uniform across differently-sized devices
- Fixed bug that caused the app to crash when the current flowing through a component was higher than 1000 mega amps
1.0.1
2019-09-25
Lights out! Circuitry now supports Dark Mode.
1.0
2019-09-11
Ways to hack Circuitry - 3D Circuit Builder
- iGameGod (Watch Video Guide)
- iGameGuardian for iOS (Watch Video Guide) or GameGuardian for Android (Watch Video Guide)
- Lucky Patcher (Watch Video Guide)
- Cheat Engine (Watch Video Guide)
- Magisk Manager (Watch Video Guide)
- CreeHack (Watch Video Guide)
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Circuitry - 3D Circuit Builder MOD APK
Request a Hack
Ratings
4 out of 5
150 Ratings
Reviews
YouVersionUser,
So much potential
I am an electrical engineering major at my school and I can see this being so helpful to me. We have a program at school that called multisim and it basically does what this app does on a way bigger scale with so many more components. My professor says if we multisim our homework problems we get bonus points. The only down side is that the program is all the way in the lab on the lab computers because it cost money to download on our laptops. This would be perfect for me especially when I’m struggling on a homework problem. Please continue to work on this and add more components. This has so much potential. Also labeling things would be grate too!
ROB251,
High Potential!
Really cool app, fun and intuitive. I enjoy the drag and drop aspect of each piece. Would be nice to know more about what each piece does, power source - resistor - (obviously) bulb? Also an undo/redo buttons would be nice for quick fixes. Looking forward to updates!
Mr.Picky,
Will not open ?
Very strange. I tried downloading App twice and each time only a folder appears in my iPhone ‘files’. Going to home screen to find and click app icon takes you back to file folder, but nothing happens in either case. This is why I’m giving it two stars for now. Maybe someone can tell me what’s going on
CSwens82,
Could be great!
Please add more components and allow for DC and AC circuits and allow us to use different virtual meters to test circuits at different points. Please continue development! I will pay money for this app if it becomes more useful.
f. this, Android's def better,
Doesn’t display on iPad mini 4 but looks amazing on XR
Wanted an app like this, and it’s executed well I think. Hope more can be added though or at least include a couple samples though for accessibility I’d say. But experiment and things make a bit of sense I guess.
NewPerfection,
Good Start!
This is a neat app that I'd like to see developed more. Right now it's pretty limited, but I see lots of potential. A list of things that I think are needed or would be helpful:
*Being able to move placed components.
*Component labels.
*More components.
*Graphical representation of current flow direction.
*Basic export of a 2D schematic.
Please keep working on this, I'd like to see where it can go!
*Being able to move placed components.
*Component labels.
*More components.
*Graphical representation of current flow direction.
*Basic export of a 2D schematic.
Please keep working on this, I'd like to see where it can go!
12eww567ah,
This game is awesome
This game is very fun and simple. Also this game is very exciting for someone who wants to learn electrical engineer like myself.
BlindUser1968,
Great project, needs polish
Really cool idea but I don’t know what most of the components are because they aren’t labeled. A tutorial would be good too
tekbyte,
Not quite there yet
Has a lot of potential and love the 3D style but I could figure out how to draw connections between the components
ThatEbertLife,
Nice job
It’s good, just needs a more intuitive UI. Good work
