Dräger Gas Detection Training Hack 1.7.0 + Redeem Codes
Developer: Draegerwerk AG & Co. KGaA
Category: Education
Price: Free
Version: 1.7.0
ID: com.draeger.gdt
Screenshots
Description
Application instructions for the Dräger Gas Detection Training App
The Dräger Gas Detection Training App simulates various gas measuring devices in a trainer/trainee situation. The devices must be on the same WLAN (e.g. "hotspot" of a smartphone) to conduct training.
Use with one mobile device:
If you only have one mobile device available, use demo mode to simulate gas alarms from gas measuring devices on a mobile device.
Use with multiple mobile devices:
To start trainer or student mode, you first need to enter a username.
You should be logged on to one of the devices as a trainer.
The other devices should be started in student mode.
After the trainer has logged on, a selection of various gas detectors is displayed. The training begins once a device has been selected. From this point on the students can log on with the trainer.
The trainer can then send gas values to the student devices for the various gas detector sensors by selecting the current gas value. There is then the option of changing the value or using one of three preset values. Two of these values correspond to an alarm situation (A1, A2). These values are sent directly to the student devices.
The students view the gas detector on the display once they have started the training. They are shown a simulation of the gas detector alarm status on their mobile device with sound and vibration. The visual display (LEDs and display) of the gas detector is shown on the device display.
The trainer can also trigger device alarms (warning, fault and battery alarm) by tapping the values field of the “Device error”.
The student can clear alarms on the display if permitted.
Within the app it is possible to create customized instrument settings (sensors, alarm levels and alarm acknowledgement) and customized scenarios for defined instruments for training.
The Dräger Gas Detection Training App simulates various gas measuring devices in a trainer/trainee situation. The devices must be on the same WLAN (e.g. "hotspot" of a smartphone) to conduct training.
Use with one mobile device:
If you only have one mobile device available, use demo mode to simulate gas alarms from gas measuring devices on a mobile device.
Use with multiple mobile devices:
To start trainer or student mode, you first need to enter a username.
You should be logged on to one of the devices as a trainer.
The other devices should be started in student mode.
After the trainer has logged on, a selection of various gas detectors is displayed. The training begins once a device has been selected. From this point on the students can log on with the trainer.
The trainer can then send gas values to the student devices for the various gas detector sensors by selecting the current gas value. There is then the option of changing the value or using one of three preset values. Two of these values correspond to an alarm situation (A1, A2). These values are sent directly to the student devices.
The students view the gas detector on the display once they have started the training. They are shown a simulation of the gas detector alarm status on their mobile device with sound and vibration. The visual display (LEDs and display) of the gas detector is shown on the device display.
The trainer can also trigger device alarms (warning, fault and battery alarm) by tapping the values field of the “Device error”.
The student can clear alarms on the display if permitted.
Within the app it is possible to create customized instrument settings (sensors, alarm levels and alarm acknowledgement) and customized scenarios for defined instruments for training.
Version history
1.7.0
2022-01-18
With this version we prepare the app for the future, with changes and improvements to the app base.
In addition, from now on all app functionalities are unlocked without entering the unlock code.
In addition, from now on all app functionalities are unlocked without entering the unlock code.
1.6.3
2020-02-17
Bug fixes
1.6.1
2019-07-08
- added 64 bit support
1.6.0
2019-04-02
Thank you for using the app "Dräger Gas Detection Training"!
This release includes the following changes:
+ Extension: multi-gas detector Dräger X-am 8000
+ Extension: multi-gas detector Dräger X-am 3500
+ General bugfixing
This release includes the following changes:
+ Extension: multi-gas detector Dräger X-am 8000
+ Extension: multi-gas detector Dräger X-am 3500
+ General bugfixing
1.5.3
2018-04-12
New instruments: Dräger Pac 6000/6500 and Dräger Pac 8000/8500 series
Bug fixes
Bug fixes
1.4.1
2018-01-25
New Icon and resigning
1.4.0
2017-03-30
New:
- New App Icon
- Zoom function for X-am 7000 display
- Up to 12 phases for own scenarios
- General improvements
- New App Icon
- Zoom function for X-am 7000 display
- Up to 12 phases for own scenarios
- General improvements
1.3.0
2016-12-15
Many thanks for your interest in the Dräger Gas Detection Training App!
This version contains the following improvements and changes:
- Changes for the license terms / data protection notes
- larger selection of flammable gases for CatEx and IR sensors
- display of battery icon for X-am instruments
- small general improvements
- bug fixes
This version contains the following improvements and changes:
- Changes for the license terms / data protection notes
- larger selection of flammable gases for CatEx and IR sensors
- display of battery icon for X-am instruments
- small general improvements
- bug fixes
1.1.11
2016-06-01
- new languages: French and Spanish (will be automatically used based language settings of the phone)
- adaptation for iOS 9
- small improvements of the app
Please use the activation code under settings of the app to release additional functions in your app: configure your own training instruments (sensors, alarm limits) and create own training scenarios.
- adaptation for iOS 9
- small improvements of the app
Please use the activation code under settings of the app to release additional functions in your app: configure your own training instruments (sensors, alarm limits) and create own training scenarios.
1.1.2
2015-09-01
New functions:
-Creation of custom configurations for devices possible. This includes sensor set-up, alarm levels and behaviour during alarm acknowledgment..
-Creation of custom configurations for (training) scenarios possible. This allows the individual creation of training scenarios with multiple gas reading changes on one button press for the trainer.
-For this functions an activation code is needed. The code can be requested from Dräger via an link out of the app.
Smaller bugs in the app have been removed.
Comments for practical usage:
-The needed WLAN can be created via a standard home router or via a “hotspot” of a smartphone.
-You can increase robustness of the smartphone with an outdoor cover.
-The focus of the app is the „remote control“ of gas detector simulations and the resulting correct action depending on the presented gas values. The topics of „instrument menu“ and „service“ are recommend to cover with real detectors. These topics are not part of the app.
-
Examples for the applications of the app:
-Classroom trainings
-Fire Service training scenarios
-Usage as simulator for carbonmonoxid detectors in ambulance/emergency trainings
-Competitions of mine resuce teams
-Trainings in the industry
-Creation of custom configurations for devices possible. This includes sensor set-up, alarm levels and behaviour during alarm acknowledgment..
-Creation of custom configurations for (training) scenarios possible. This allows the individual creation of training scenarios with multiple gas reading changes on one button press for the trainer.
-For this functions an activation code is needed. The code can be requested from Dräger via an link out of the app.
Smaller bugs in the app have been removed.
Comments for practical usage:
-The needed WLAN can be created via a standard home router or via a “hotspot” of a smartphone.
-You can increase robustness of the smartphone with an outdoor cover.
-The focus of the app is the „remote control“ of gas detector simulations and the resulting correct action depending on the presented gas values. The topics of „instrument menu“ and „service“ are recommend to cover with real detectors. These topics are not part of the app.
-
Examples for the applications of the app:
-Classroom trainings
-Fire Service training scenarios
-Usage as simulator for carbonmonoxid detectors in ambulance/emergency trainings
-Competitions of mine resuce teams
-Trainings in the industry
1.0
2015-06-05
Ways to hack Dräger Gas Detection Training
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Dräger Gas Detection Training MOD APK
Request a Hack
Ratings
2 out of 5
1 Ratings
Reviews
Pyrojunkie,
Needs additional features
This app is a very cool training tool for gas monitor operations. It is very life like and accurate. This app needs to have additional features
- manipulation of gas monitors by using the ok and + buttons on the monitors to acknowledge an alarm, then the monitor on and off and fresh air calibration.
- manipulation of gas monitors by using the ok and + buttons on the monitors to acknowledge an alarm, then the monitor on and off and fresh air calibration.
