GetMyPOV H Hack 3.0.0 + Redeem Codes
GetMyPOV hotspot
Developer: Apps Di Pizzocaro S.
Category: Photo & Video
Price: $2.99 (Download for free)
Version: 3.0.0
ID: com.stefano.pizzocaro.GetMyPOV-hotspot
Screenshots
Description
The app is able to perform all the tasks of GetMyPOV C (apart from freezing the scene) and, in addition, has the following features added:
* a set of hard coded configurations (modes) that help adapting the app to the different cases of use for which it has been designed
* the broadcasting of the video streaming, generated by the local camera session, to several devices running GetMyPOV F/C, at the same time
* the capability to view and record the cameras output of more devices running GetMyPOV F/C at the same time, and to directly fall in each context to control their cameras output.
* the capability to receive a video streaming from a device and to broadcast it to a set of "listening" devices.
This feature, that in the preceding versions made sense when adopted joined to the system Wi-Fi hotspot service, representing a way to enlarge the distance between the watcher and the receivers, now it is improved with the ability of the receiving side to act as network server, and as such, to be addressable by the port-forwarding configuration of a public-IP router, allowing this way to be a gate fed from the outside and capable of broadcasting in the local network (and toward some other public-IP destination, if needed). This new feature of the receiving side is available even enabling the Auto-discovery local network mode, greatly simplifying the management of the receivers that will need to run in this mode too.
* a set of hard coded configurations (modes) that help adapting the app to the different cases of use for which it has been designed
* the broadcasting of the video streaming, generated by the local camera session, to several devices running GetMyPOV F/C, at the same time
* the capability to view and record the cameras output of more devices running GetMyPOV F/C at the same time, and to directly fall in each context to control their cameras output.
* the capability to receive a video streaming from a device and to broadcast it to a set of "listening" devices.
This feature, that in the preceding versions made sense when adopted joined to the system Wi-Fi hotspot service, representing a way to enlarge the distance between the watcher and the receivers, now it is improved with the ability of the receiving side to act as network server, and as such, to be addressable by the port-forwarding configuration of a public-IP router, allowing this way to be a gate fed from the outside and capable of broadcasting in the local network (and toward some other public-IP destination, if needed). This new feature of the receiving side is available even enabling the Auto-discovery local network mode, greatly simplifying the management of the receivers that will need to run in this mode too.
Version history
3.0.0
2022-04-08
* Support of the new network mode:
The app hosts the same connection database as the "F" app but here, because of the supported plurality of contemporary connections there is no connections navigator, instead the database is here completed with the "Enabled" attribute that applies to each connection record. In the "Archive" mode however the navigator needs to be available because of the singularity of connection required by file-exchange operations. Then, differently from the auto-discovery mode, in the explicit network address mode, more than one "H" instances can live within the same Wi-Fi network.
* A more powerful "Repeater" mode:
To get the most from the new supported network mode, "Repeater" mode is equipped with possibility to have the receiving/collector side acting as a network server, as such directly addressable inside the local network and, indeed, reachable from the outside through a router port forwarding. This feature is available even when the "old" "Auto-discovery local network" mode in selected, evidently here applied only to the chorus of the potential targets of the broadcasting. Note: without this option activated the collecting side of the Repeater mode run as a network client just like what is done for any of the potential targets of the broadcasting.
The app hosts the same connection database as the "F" app but here, because of the supported plurality of contemporary connections there is no connections navigator, instead the database is here completed with the "Enabled" attribute that applies to each connection record. In the "Archive" mode however the navigator needs to be available because of the singularity of connection required by file-exchange operations. Then, differently from the auto-discovery mode, in the explicit network address mode, more than one "H" instances can live within the same Wi-Fi network.
* A more powerful "Repeater" mode:
To get the most from the new supported network mode, "Repeater" mode is equipped with possibility to have the receiving/collector side acting as a network server, as such directly addressable inside the local network and, indeed, reachable from the outside through a router port forwarding. This feature is available even when the "old" "Auto-discovery local network" mode in selected, evidently here applied only to the chorus of the potential targets of the broadcasting. Note: without this option activated the collecting side of the Repeater mode run as a network client just like what is done for any of the potential targets of the broadcasting.
2.0.3
2021-11-05
The crash occurring on the "Start" command, when the device was in a IP6 network, has been fixed in this version.
Furthermore, in "Controller" mode, in the inspecting of a subview a part of data relating to the remote device was not correct or incomplete. Here it has been fixed.
Furthermore, in "Controller" mode, in the inspecting of a subview a part of data relating to the remote device was not correct or incomplete. Here it has been fixed.
2.0
2021-10-23
First of all, by being (essentially) a superset of GetMyPOV C, GetMyPOV H v. 2.0 comes, in addition, with all the improvements contained in GetMyPOV F/C v. 2.0.
Then, what is specifically tight to the GetMyPOV H architecture are the following improvements:
** Improvements in the Repeater mode:
Now the mode presents the panel equipped with both the Receive scene management and the Remote device sections. This means that the repeater, during its task of repeating the video streaming received from the source to the chorus of followers, allows the watching of the scene, the local recording of it and the control of the camera session running in the source device. These set of new features makes the app a perfect and convenient way to very quickly put in place a temporary (or permanent why not) video surveillance plant made by smartphones ( at the cost of a single instance of GetMyPOV H - see at https://www.getmypov.com/en/whatsnew.php for an example).
**Improvements in the Controller mode:
In the multi-view asset
- each view shows at the bottom the name of the source device and the state of the source (whenever the view appeared black, that is in case of "waiting for motion" or "suspended" state of the remote device).
- Hiding the scene here means hiding all the views and, in turn, getting the list of the source devices and/or a different list of the source devices that are under recording.
Then, what is specifically tight to the GetMyPOV H architecture are the following improvements:
** Improvements in the Repeater mode:
Now the mode presents the panel equipped with both the Receive scene management and the Remote device sections. This means that the repeater, during its task of repeating the video streaming received from the source to the chorus of followers, allows the watching of the scene, the local recording of it and the control of the camera session running in the source device. These set of new features makes the app a perfect and convenient way to very quickly put in place a temporary (or permanent why not) video surveillance plant made by smartphones ( at the cost of a single instance of GetMyPOV H - see at https://www.getmypov.com/en/whatsnew.php for an example).
**Improvements in the Controller mode:
In the multi-view asset
- each view shows at the bottom the name of the source device and the state of the source (whenever the view appeared black, that is in case of "waiting for motion" or "suspended" state of the remote device).
- Hiding the scene here means hiding all the views and, in turn, getting the list of the source devices and/or a different list of the source devices that are under recording.
1.2.0
2021-04-03
Now the frame viewer, in addition to the natural velocity in playing the sequence, provides new added velocities (x 2, x 4, x 1/2, x 1/4)
1.1.0
2021-03-05
New features:
- Verbosity of the monitor line during the connection process
Improvements:
- No need to restart the H instance (in broadcast modes) upon rejection of wrongly set video session (it is enough to turn it off)
bug fixes:
- streaming with large and heavy frames issues
- crash happening on "start" after a "get file" command made without net available
- "Controller" mode - Inconsistent state of GUI in happening when , running with one watcher, another follower without camera session comes into play
- "Broadcast II" mode - "in fps" expression, in monitor line, survived when connection with watcher interrupted
- looping message upon "Too many hotspot" situation
- Verbosity of the monitor line during the connection process
Improvements:
- No need to restart the H instance (in broadcast modes) upon rejection of wrongly set video session (it is enough to turn it off)
bug fixes:
- streaming with large and heavy frames issues
- crash happening on "start" after a "get file" command made without net available
- "Controller" mode - Inconsistent state of GUI in happening when , running with one watcher, another follower without camera session comes into play
- "Broadcast II" mode - "in fps" expression, in monitor line, survived when connection with watcher interrupted
- looping message upon "Too many hotspot" situation
1.0.8
2021-02-09
Ways to hack GetMyPOV H
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download GetMyPOV H MOD APK
Request a Hack
