Kessler kOS for CineDrive Hack 4.10.6 + Redeem Codes
Developer: Kessler Crane Inc.
Category: Photo & Video
Price: Free
Version: 4.10.6
ID: com.kesslercrane.fusion
Screenshots
Description
The Kessler kOS™ app for CineDrive on iPad is Kessler’s premium motion control software for operating Kessler’s CineDrive motion control system. Specifically, kOS™ communicates motion control commands and data to the CineDrive™ Brain. kOS™ for iPad runs on any iPad device with iOS 10.0 or later.
CONTROL ANY MOTION
Live, looping, stop-motion, time-lapse, GigaPixel and event mode moves are at your fingertips.
DIGITAL KEY FRAMING
Simply move each axis into position and hit record. kOS remembers exact positioning for 100% repeatable moves.
WIFI CONNECTIVITY
CineDrive creates its own WiFi network that you can connect your device to instantly.
EASY KEY FRAME SMOOTHING
Add & manipulate curves to your moves for ease in and ease outs. Also, link each side of the key frame to match.
EDITABLE KEY FRAMES
No need to re-record the move if it's not exactly what you want. Edit one or all axes and key frames into the perfect position. Featuring incremental, exact motor position and tap & move key frame adjustments.
REPEATABILITY
Repeat the exact same move over and over again. Even change the duration to have the same move played out in different lengths of time. Want a move where the shot transitions from a live plate to a time-lapse? No problem. Simply repeat the move as a live shot and as a time lapse to blend together in post.
DELAY BY DATE/TIME
Not going to be around when your move needs to start? No problem. Easily set a date/time or fixed amount of time to have your move begin. kOS takes care of the rest.
FLASH MARK/BLOOP
Sync up your moves easily via the built-in flash marks with adjustable delay. Currently, there are five types of flash marks available: Brain LED, Flashlight, Audible Tone, Flash Screen (device), Software Clap (device). Choose one or choose all.
PRE & POST PHOTOS (TIME-LAPSE)
Easily add photos to your move before the move begins and after the move ends.
GO TO POSITION
Set minimum and maximum ranges on each axis (ie. slider 0" to 32") and go to any position by entering a value.
LOAD & GO
This feature allows for pre-loading a move so that you are able to start instantly whenever you are
ready.
CAMERA ROLL
Trigger your camera to start recording any amount of time before the move begins and when to stop after the move ends.
ANALOG CONTROL PANEL
Manually control several axes live with the built in analog controller.
EVENT MODE
Event mode is mainly intended for live events or scenarios where exact position recalling on-the-fly is needed. For example, if you are filming a live concert, you can have different positions on stage saved. You can move easily from the drummer, to the guitarist, to the lead singer and so forth. This mode is also great for repeatedly hitting actor marks on set.
GIGAPIXEL
GigaPixel is traditionally used for 360 degree virtual tours, panoramic photographs or GigaPixel images which are extremely high resolution photographs that are compiled of many lower resolution photographs.
GRAPH EXPANSION
Expand the graph with one touch when precise key framing is needed.
SCRUB THROUGH MOVE
Need to edit a key frame or see when the camera will be in a certain position? Use the scrub feature to instantly move to a desired position.
LOOPING
Looping is made easy with kOS. Simply select one-time or continuous along with the type of reverse to first key frame method.
CAMERA CONTROL
Set CineDrive to trigger or control your camera’s exposure time within kOS.
AUTO TIME-LAPSE CALCULATION
Enter your desired clip length and frame rate and kOS will calculate the run time needed.
BUMP BUTTONS
Move in very small increments to ensure a precise position is on point.
DROPBOX INTEGRATION
Upload saved moves directly to your Dropbox account within kOS app.
MOTOR CONFIGURATION
Each axis is able to be customized. For example: axis name, run speed, dampening, smooth curves and bump button adjustment values.
CONTROL ANY MOTION
Live, looping, stop-motion, time-lapse, GigaPixel and event mode moves are at your fingertips.
DIGITAL KEY FRAMING
Simply move each axis into position and hit record. kOS remembers exact positioning for 100% repeatable moves.
WIFI CONNECTIVITY
CineDrive creates its own WiFi network that you can connect your device to instantly.
EASY KEY FRAME SMOOTHING
Add & manipulate curves to your moves for ease in and ease outs. Also, link each side of the key frame to match.
EDITABLE KEY FRAMES
No need to re-record the move if it's not exactly what you want. Edit one or all axes and key frames into the perfect position. Featuring incremental, exact motor position and tap & move key frame adjustments.
REPEATABILITY
Repeat the exact same move over and over again. Even change the duration to have the same move played out in different lengths of time. Want a move where the shot transitions from a live plate to a time-lapse? No problem. Simply repeat the move as a live shot and as a time lapse to blend together in post.
DELAY BY DATE/TIME
Not going to be around when your move needs to start? No problem. Easily set a date/time or fixed amount of time to have your move begin. kOS takes care of the rest.
FLASH MARK/BLOOP
Sync up your moves easily via the built-in flash marks with adjustable delay. Currently, there are five types of flash marks available: Brain LED, Flashlight, Audible Tone, Flash Screen (device), Software Clap (device). Choose one or choose all.
PRE & POST PHOTOS (TIME-LAPSE)
Easily add photos to your move before the move begins and after the move ends.
GO TO POSITION
Set minimum and maximum ranges on each axis (ie. slider 0" to 32") and go to any position by entering a value.
LOAD & GO
This feature allows for pre-loading a move so that you are able to start instantly whenever you are
ready.
CAMERA ROLL
Trigger your camera to start recording any amount of time before the move begins and when to stop after the move ends.
ANALOG CONTROL PANEL
Manually control several axes live with the built in analog controller.
EVENT MODE
Event mode is mainly intended for live events or scenarios where exact position recalling on-the-fly is needed. For example, if you are filming a live concert, you can have different positions on stage saved. You can move easily from the drummer, to the guitarist, to the lead singer and so forth. This mode is also great for repeatedly hitting actor marks on set.
GIGAPIXEL
GigaPixel is traditionally used for 360 degree virtual tours, panoramic photographs or GigaPixel images which are extremely high resolution photographs that are compiled of many lower resolution photographs.
GRAPH EXPANSION
Expand the graph with one touch when precise key framing is needed.
SCRUB THROUGH MOVE
Need to edit a key frame or see when the camera will be in a certain position? Use the scrub feature to instantly move to a desired position.
LOOPING
Looping is made easy with kOS. Simply select one-time or continuous along with the type of reverse to first key frame method.
CAMERA CONTROL
Set CineDrive to trigger or control your camera’s exposure time within kOS.
AUTO TIME-LAPSE CALCULATION
Enter your desired clip length and frame rate and kOS will calculate the run time needed.
BUMP BUTTONS
Move in very small increments to ensure a precise position is on point.
DROPBOX INTEGRATION
Upload saved moves directly to your Dropbox account within kOS app.
MOTOR CONFIGURATION
Each axis is able to be customized. For example: axis name, run speed, dampening, smooth curves and bump button adjustment values.
Version history
4.10.6
2020-10-07
* Updated for iOS 14.
* Various bug fixes and UI/performance improvements.
* Various bug fixes and UI/performance improvements.
4.10.5
2019-09-26
**kOS for CineDrive 4.10.5**
* Updated iPOS M32P motor profile file.
* Various bug fixes and UI/performance improvements.
* Updated Help.
* Updated iPOS M32P motor profile file.
* Various bug fixes and UI/performance improvements.
* Updated Help.
4.10.4
2018-09-18
**kOS for CineDrive 4.10.4**
* Requires and includes CineDrive firmware version 4.10.1.
* Event Manager:
* NEW: Added the ability to specify a pre photo delay when executing a photo sequence.
* Fixed an issue with the number of photos taken per turntable rotation when executing a photo sequence.
* Various bug fixes and UI/performance improvements.
* Requires and includes CineDrive firmware version 4.10.1.
* Event Manager:
* NEW: Added the ability to specify a pre photo delay when executing a photo sequence.
* Fixed an issue with the number of photos taken per turntable rotation when executing a photo sequence.
* Various bug fixes and UI/performance improvements.
4.10.1
2018-04-04
**kOS for CineDrive 4.10.1**
* Requires and includes firmware version 4.10.0.
* Requires and includes new iPOS (v6) motor profiles.
* Added support for configuring the motor used with the JogWheel.
* Various bug fixes and UI/performance improvements.
* Requires and includes firmware version 4.10.0.
* Requires and includes new iPOS (v6) motor profiles.
* Added support for configuring the motor used with the JogWheel.
* Various bug fixes and UI/performance improvements.
4.9.3
2017-12-28
* Requires and includes firmware version 4.9.2.
* Various bug fixes and UI/performance improvements.
* Various bug fixes and UI/performance improvements.
4.9.1
2017-10-27
* Fixed display issue on the Analog Control Panel.
4.9.0
2017-10-24
kOS for CineDrive 4.9.0
* Requires and includes firmware version 4.9.0.
* NEW MultiLapse feature!
* A password can now be assigned to the wireless access point on CineDrive.
* A specific number of loops can now be configured for a Live Motion move on the Live Motion panel.
* Various bug fixes and UI/performance improvements.
* Requires and includes firmware version 4.9.0.
* NEW MultiLapse feature!
* A password can now be assigned to the wireless access point on CineDrive.
* A specific number of loops can now be configured for a Live Motion move on the Live Motion panel.
* Various bug fixes and UI/performance improvements.
4.8.1
2017-06-21
**kOS for CineDrive 4.8.1**
* Requires and includes firmware version 4.8.1.
* In Event Mode, added a tile option to move motors to starting position when the the move is loaded (when the tile is selected).
* The locking options on the Graph Options panel are now saved with each Move. The locking options still default to on, but the Auto Lock option now defaults to off.
* Various bug fixes and UI/performance improvements.
* Requires and includes firmware version 4.8.1.
* In Event Mode, added a tile option to move motors to starting position when the the move is loaded (when the tile is selected).
* The locking options on the Graph Options panel are now saved with each Move. The locking options still default to on, but the Auto Lock option now defaults to off.
* Various bug fixes and UI/performance improvements.
4.7.1
2017-03-29
**kOS for CineDrive 4.7.1**
WARNING: if your CineDrive Brain still has the AdHoc wireless module, you will not be able to connect to the Brain if you update to the included firmware v4.7.1. Firmware v4.7.0 will continue to work with this version of the app. Please contact Kessler for more information on updating the wireless module in your Brain.
* Requires and includes firmware 4.7.1.
* Event Manager enhancements:
* Added Photo Mode and Video Mode to facilitate taking photos or video of an item on a turntable.
* Added the ability to import and export Event files (right-click on an Event tab).
* Added the option to repeat a sequence indefinitely.
* Added an option on each tile to 'Pause sequence after reaching positions'. User is prompted when paused whether to continue or stop.
* Added status display when executing a sequence.
* Added the option to enable by default camera trigger when creating a new tile.
* Various bug fixes and UI/performance improvements.
WARNING: if your CineDrive Brain still has the AdHoc wireless module, you will not be able to connect to the Brain if you update to the included firmware v4.7.1. Firmware v4.7.0 will continue to work with this version of the app. Please contact Kessler for more information on updating the wireless module in your Brain.
* Requires and includes firmware 4.7.1.
* Event Manager enhancements:
* Added Photo Mode and Video Mode to facilitate taking photos or video of an item on a turntable.
* Added the ability to import and export Event files (right-click on an Event tab).
* Added the option to repeat a sequence indefinitely.
* Added an option on each tile to 'Pause sequence after reaching positions'. User is prompted when paused whether to continue or stop.
* Added status display when executing a sequence.
* Added the option to enable by default camera trigger when creating a new tile.
* Various bug fixes and UI/performance improvements.
4.7.0
2017-03-16
**kOS for CineDrive 4.7.0**
WARNING: if your CineDrive Brain still has the AdHoc wireless module, you will not be able to connect to the Brain if you update to the included firmware v4.7.1. Firmware v4.7.0 will continue to work with this version of the app. Please contact Kessler for more information on updating the wireless module in your Brain.
* Requires and includes firmware 4.7.1.
* Event Manager enhancements:
* Added Photo Mode and Video Mode to facilitate taking photos or video of an item on a turntable.
* Added the ability to import and export Event files (right-click on an Event tab).
* Added the option to repeat a sequence indefinitely.
* Added an option on each tile to 'Pause sequence after reaching positions'. User is prompted when paused whether to continue or stop.
* Added status display when executing a sequence.
* Added the option to enable by default camera trigger when creating a new tile.
* Various bug fixes and UI/performance improvements.
WARNING: if your CineDrive Brain still has the AdHoc wireless module, you will not be able to connect to the Brain if you update to the included firmware v4.7.1. Firmware v4.7.0 will continue to work with this version of the app. Please contact Kessler for more information on updating the wireless module in your Brain.
* Requires and includes firmware 4.7.1.
* Event Manager enhancements:
* Added Photo Mode and Video Mode to facilitate taking photos or video of an item on a turntable.
* Added the ability to import and export Event files (right-click on an Event tab).
* Added the option to repeat a sequence indefinitely.
* Added an option on each tile to 'Pause sequence after reaching positions'. User is prompted when paused whether to continue or stop.
* Added status display when executing a sequence.
* Added the option to enable by default camera trigger when creating a new tile.
* Various bug fixes and UI/performance improvements.
4.6.2
2017-01-03
* Requires and includes firmware 4.7.0.
* Various bug fixes and UI/performance improvements.
* Various bug fixes and UI/performance improvements.
4.6.0
2016-10-13
* Requires and includes firmware 4.6.0.
* Requires and includes new motor profiles for V2 controllers.
* 'Event Mode' is now 'Event Manager'.
* Event Manager enhancements:
* Added the ability to create multiple Events on separate tabs.
* Added the ability to automatically execute each Tile in an Event sequentially.
* Added support for triggering a camera on a position Tile.
* Added 'Go To' button on Tile Setup panel to send the motors to the positions configured for that tile.
* Added the ability to select a V2 motor controller input to trigger the start of a loaded move. This is available on the Live Motion panel.
* Added the ability to indicate that a LANC cable is being used to trigger a camera. This is done on the Delay panel (under Camera Roll).
* On the Motor Configuration panel, the Axis Type can now be stored in V2 motor controllers (this was previously only stored in the software).
* Various bug fixes and UI/performance improvements.
* Requires and includes new motor profiles for V2 controllers.
* 'Event Mode' is now 'Event Manager'.
* Event Manager enhancements:
* Added the ability to create multiple Events on separate tabs.
* Added the ability to automatically execute each Tile in an Event sequentially.
* Added support for triggering a camera on a position Tile.
* Added 'Go To' button on Tile Setup panel to send the motors to the positions configured for that tile.
* Added the ability to select a V2 motor controller input to trigger the start of a loaded move. This is available on the Live Motion panel.
* Added the ability to indicate that a LANC cable is being used to trigger a camera. This is done on the Delay panel (under Camera Roll).
* On the Motor Configuration panel, the Axis Type can now be stored in V2 motor controllers (this was previously only stored in the software).
* Various bug fixes and UI/performance improvements.
4.5.1
2016-07-27
* Requires and includes CineDrive firmware version 4.5.0.
* The Exposure field is no longer visible on the Time Lapse panel when External Intervalometer is turned on.
* Various bug fixes and UI/performance improvements.
* Updated help files.
* The Exposure field is no longer visible on the Time Lapse panel when External Intervalometer is turned on.
* Various bug fixes and UI/performance improvements.
* Updated help files.
4.4.0
2016-05-20
* Requires and includes CineDrive firmware version 4.4.0.
* Requires and includes new CineDrive motor profiles (v4).
* NEW Trajectories can now be paused and resumed.
* NEW Support for using an External Intervalometer.
* The 'Reset Axis PIN' feature is now called 'Calibration PIN' and has been extended to cover Mark Begin/End and Auto Calibrate.
* Various bug fixes and UI/performance improvements.
* Requires and includes new CineDrive motor profiles (v4).
* NEW Trajectories can now be paused and resumed.
* NEW Support for using an External Intervalometer.
* The 'Reset Axis PIN' feature is now called 'Calibration PIN' and has been extended to cover Mark Begin/End and Auto Calibrate.
* Various bug fixes and UI/performance improvements.
4.3.0
2016-03-23
**kOS for iPad 4.3.0**
* Requires and includes CineDrive firmware version 4.2.1.
* Includes new motor profile for PIM M32P motors.
* NEW Audio Sync feature: sync an audio file with a move.
* Various bug fixes and UI/performance improvements.
* Requires and includes CineDrive firmware version 4.2.1.
* Includes new motor profile for PIM M32P motors.
* NEW Audio Sync feature: sync an audio file with a move.
* Various bug fixes and UI/performance improvements.
4.2.0
2016-02-17
* Requires and includes CineDrive firmware version 4.2.0.
* Event Mode tiles can now be reordered using drag and drop. In Select mode, long press on a tile to begin moving it.
* Scrub is now available when the graph is expanded. Tap the Scrub button in the toolbar to reveal the time slider control.
* When CineDrive is password locked, most UI controls are now disabled.
* Various bug fixes and UI/performance improvements.
* Event Mode tiles can now be reordered using drag and drop. In Select mode, long press on a tile to begin moving it.
* Scrub is now available when the graph is expanded. Tap the Scrub button in the toolbar to reveal the time slider control.
* When CineDrive is password locked, most UI controls are now disabled.
* Various bug fixes and UI/performance improvements.
4.1.1
2016-01-06
* Requires and includes CineDrive firmware version 4.1.0.2.
4.1.0
2015-12-19
* Requires iOS version 8.0 or higher.
* Requires and includes CineDrive firmware version 4.1.0.
* Requires and includes updated CineDrive motor profile files.
* In Event Mode, tiles are now active during a move. Clicking a tile during a move will stop the move and execute the new task.
* 'Max Damping' is now expressed as a percentage of the maximum damping allowed. A value of 0% indicates no damping (fast acceleration).
* CineDrive LED and Light control have been moved to CineDrive Configuration.
* Various bug fixes and UI/performance improvements.
* Requires and includes CineDrive firmware version 4.1.0.
* Requires and includes updated CineDrive motor profile files.
* In Event Mode, tiles are now active during a move. Clicking a tile during a move will stop the move and execute the new task.
* 'Max Damping' is now expressed as a percentage of the maximum damping allowed. A value of 0% indicates no damping (fast acceleration).
* CineDrive LED and Light control have been moved to CineDrive Configuration.
* Various bug fixes and UI/performance improvements.
3.6.0
2015-07-16
* NEW Tabs feature.
* Added the ability to launch a move from an Event Mode tile.
* Added 'Move Time Line Here' button to Graph Bump panel.
* Restored separate 'Max Speed' and 'Max Setup Speed' fields in Motor Configuration.
* Various bug fixes and performance improvements.
* Added the ability to launch a move from an Event Mode tile.
* Added 'Move Time Line Here' button to Graph Bump panel.
* Restored separate 'Max Speed' and 'Max Setup Speed' fields in Motor Configuration.
* Various bug fixes and performance improvements.
3.5.0
2015-03-13
* NEW Event Mode feature.
* A Video Clip Length can now be specified when configuring a Time Lapse.
* Time Lapse pre and post move photos can now be entered separately.
* Added 'Delay Before Picture' and 'Delay Before Repeat' options to the GigaPixel feature.
* Various bug fixes and performance improvements.
* A Video Clip Length can now be specified when configuring a Time Lapse.
* Time Lapse pre and post move photos can now be entered separately.
* Added 'Delay Before Picture' and 'Delay Before Repeat' options to the GigaPixel feature.
* Various bug fixes and performance improvements.
3.4.0
2014-11-13
* Support for iOS 8 (requires at least iOS 7.1).
* Requires and includes firmware version 3.4.0.22.
* Motors must now be disconnected before performing a firmware update.
* Added the ability to take any number of photos before and after a Time Lapse move is executed.
* Added the ability to calculate Time Lapse Delay from the other Time Lapse parameters.
* Added the ability to add space before the first key frame or after the last key frame without modifying the timing between existing key frames.
* Added 'Use Fine Control' option when moving Pan and Tilt during GigaPixel setup.
* Removed vertical constraints on Bezier control points when moving handles or key frames.
* Updated Help.
* Various bug fixes and performance improvements.
* Requires and includes firmware version 3.4.0.22.
* Motors must now be disconnected before performing a firmware update.
* Added the ability to take any number of photos before and after a Time Lapse move is executed.
* Added the ability to calculate Time Lapse Delay from the other Time Lapse parameters.
* Added the ability to add space before the first key frame or after the last key frame without modifying the timing between existing key frames.
* Added 'Use Fine Control' option when moving Pan and Tilt during GigaPixel setup.
* Removed vertical constraints on Bezier control points when moving handles or key frames.
* Updated Help.
* Various bug fixes and performance improvements.
3.3.1
2014-08-23
* Fixed potential issues when either the Pan or Tilt axis is renamed.
3.3.0
2014-08-21
* New GigaPixel panorama feature!
* Requires and includes firmware version 3.3.0.34 (firmware is automatically updated).
* Requires new motor profiles (profile files are automatically updated).
* Backup/Restore Calibration added to Brain Configuration.
* Various bug fixes, performance improvements, and UI enhancements.
* Requires and includes firmware version 3.3.0.34 (firmware is automatically updated).
* Requires new motor profiles (profile files are automatically updated).
* Backup/Restore Calibration added to Brain Configuration.
* Various bug fixes, performance improvements, and UI enhancements.
3.2.0
2014-06-12
* Requires and includes firmware version 3.2.0.4.
* App now runs in 64-bit mode on supported devices.
* Move and other data files can now be automatically saved to a Dropbox folder.
* The name of the current move file is now displayed in the File Management view.
* Graph bump buttons: the time position of a key frame or mark can be edited with a long press on the time or frame value.
* Graph bump buttons: added 'Move to Motor Position' button (moves key frame or mark to current motor position on a calibrated axis).
* Graph bump buttons: added Previous and Next buttons to move the popup to the previous or next key frame or mark.
* Graph bump buttons: click and hold is functional.
* Graph bump buttons: increased the resolution of the buttons.
* Added Continuous mode - Continuous button is available when axis is uncalibrated or in Analog mode. When Continuous is enabled, a stop button is displayed in the middle of the bump buttons, the bump buttons increase the speed by the configured bump amount, and the motors are not stopped when the slider is released and returns to the center. Continuous movement is canceled when either the bump stop button or move Stop button is tapped.
* kOS trajectory (kslx) files are now associated with kOS for iPad and can be sent to the app through e-mail, text message, Air Drop, and from any file-based (e.g. cloud storage) app that provides 'Open in…' functionality. When a kslx file is sent to the app, it is saved to the Documents folder and can then be subsequently opened in the app. Files sent to the app that already exist in the Documents folder will have the date and time appended to their name.
* The File Management view now allows three tasks: Save File As (assigns a name to the current trajectory and saves it to the Documents folder), Share/send a Copy (allows the current trajectory file to be shared via e-mail, text message, or Air Drop), and Open New File (select and load a trajectory file saved to the Documents folder).
* Analog Control Panel: motors can now be moved using the motion sensors on the iPad.
* Analog Control Panel: added 'Set to Default' option to control setup.
* The motor address for an axis can no longer be set above 100.
* Time display settings have been moved from Graph Options to Preferences.
* Other minor bug fixes and performance improvements.
* App now runs in 64-bit mode on supported devices.
* Move and other data files can now be automatically saved to a Dropbox folder.
* The name of the current move file is now displayed in the File Management view.
* Graph bump buttons: the time position of a key frame or mark can be edited with a long press on the time or frame value.
* Graph bump buttons: added 'Move to Motor Position' button (moves key frame or mark to current motor position on a calibrated axis).
* Graph bump buttons: added Previous and Next buttons to move the popup to the previous or next key frame or mark.
* Graph bump buttons: click and hold is functional.
* Graph bump buttons: increased the resolution of the buttons.
* Added Continuous mode - Continuous button is available when axis is uncalibrated or in Analog mode. When Continuous is enabled, a stop button is displayed in the middle of the bump buttons, the bump buttons increase the speed by the configured bump amount, and the motors are not stopped when the slider is released and returns to the center. Continuous movement is canceled when either the bump stop button or move Stop button is tapped.
* kOS trajectory (kslx) files are now associated with kOS for iPad and can be sent to the app through e-mail, text message, Air Drop, and from any file-based (e.g. cloud storage) app that provides 'Open in…' functionality. When a kslx file is sent to the app, it is saved to the Documents folder and can then be subsequently opened in the app. Files sent to the app that already exist in the Documents folder will have the date and time appended to their name.
* The File Management view now allows three tasks: Save File As (assigns a name to the current trajectory and saves it to the Documents folder), Share/send a Copy (allows the current trajectory file to be shared via e-mail, text message, or Air Drop), and Open New File (select and load a trajectory file saved to the Documents folder).
* Analog Control Panel: motors can now be moved using the motion sensors on the iPad.
* Analog Control Panel: added 'Set to Default' option to control setup.
* The motor address for an axis can no longer be set above 100.
* Time display settings have been moved from Graph Options to Preferences.
* Other minor bug fixes and performance improvements.
3.1.2
2014-05-01
Fixed bug that prevented Shoot Move Shoot from loading if the time lapse delay was over eight seconds.
Ways to hack Kessler kOS for CineDrive
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Kessler kOS for CineDrive MOD APK
Request a Hack
Ratings
5 out of 5
3 Ratings
Reviews
FullHD911,
Just amazing!
This app is one of the most powerful apps in my iPad. It's a great app for creating the most advance motion controlled timelapses with the Kessler Crane CineDrive. No need to have a bulky laptop in the field with you.
Sweetswatter,
Cinedrive
Works great, better with every update!
