MG Flasher Hack 379 + Redeem Codes
Developer: JR Auto Performance Inc.
Category: Utilities
Price: Free
Version: 379
ID: com.jrautoperformance.mgflasher
Screenshots
Description
MG Flasher is a mobile App to tune your BMW equipped with an MG1 ECU and B46, B48 or B58 engine by OBD using ENET Wi-Fi or ENET cable*. Flashing time on ENET is only 15 - 20 seconds! Disclaimer: For off-road use only.
*Initial flash/ECU unlock with ENET will take approximately 4 - 6 minutes.
Flashing License purchase will allow you to use following MG Flasher functions:
• Switchable Maps On-The-Fly - WORLD'S FIRST SOLUTION FOR BMW B58/B48 - through a simple combination of cruise control buttons you can quickly select between mapping, without the need to reflash vehicle! Support for HPFP included! Hybrids and Gen 2 switchable maps, including all ethanol maps, are under development.
• Dynamic Exhaust Burble On-The-Fly - via a simple combination of cruise control buttons you can change the intensity of the burbles whenever you like! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Max Cooling On-The-Fly - With a simple cruise control button combination sequence, you can enable the option without reflashing the car! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Torque Limit Adjustability - TCU 8HP Limiter Lifted for Gen 2 B48 and B58 platforms! Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery.
• Speed Limit Removal, Startup Roar, Torque by Gear Limiter and Burble Flame Map available on select software
• Ethanol Blends (up to E30) are built into our OTS maps and available using Switchable Maps (on select vehicles only)
• Cold start with CAT heating delete (racing/off-road use only)
• Sport Gauges (HP and TQ) adjustable by user!
• Custom flashing – flash custom maps prepared by us or other tuners/users
• OTS maps/ All OTS pack (subject to additional cost)
• Logger - log real time data and plot it into graphs for troubleshooting and optimizing (subject to additional cost)
• Cloud Log Viewer - Professional log viewing on logs.mgflasher.com
• Diagnostic- Read and clear BMW specific DTC's
• Reset various adaptations, restore coding
• CVN number (Checksum Verification Number) along with flashing counter stays untouched. This means our software will be virtually invisible to dealer level diagnostic tools
ALL future updates to the tune are FREE of cost. If we introduce a newer version, you won’t have to pay anything to get the upgrade
Supported vehicles:
BMW M140i/120i/125i/M135i F20/F21/F40
BMW M240i/220i/225i/230i/228i/M235i - F22/F23/F44
BMW M340i/318i/320i/330i/330e - F30/F31/F34/G20/G21/G28
BMW M440i/420i/430i - F32/F33/F36/G22
BMW 540i/520i/530i/530e - G30/G31/G38
BMW 640i/630i - G32
BMW 740i/740Li/730i/730Li/740e/740Le - G11/G12
BMW 840i - G14/G15/G16
BMW X1 20i/25i/28i -F48
BMW X2 20i/25i/28i/M35i - F39
BMW X3 M40i/20i/30i - G01
BMW X4 M40i/20i/30i - G02
BMW X5 40i - G05
BMW X6 40i - G06
BMW X7 40i - G07
BMW Z4 M40i - G29
BMW Z4 20i/30i - G29
Toyota Supra - A90
*Initial flash/ECU unlock with ENET will take approximately 4 - 6 minutes.
Flashing License purchase will allow you to use following MG Flasher functions:
• Switchable Maps On-The-Fly - WORLD'S FIRST SOLUTION FOR BMW B58/B48 - through a simple combination of cruise control buttons you can quickly select between mapping, without the need to reflash vehicle! Support for HPFP included! Hybrids and Gen 2 switchable maps, including all ethanol maps, are under development.
• Dynamic Exhaust Burble On-The-Fly - via a simple combination of cruise control buttons you can change the intensity of the burbles whenever you like! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Max Cooling On-The-Fly - With a simple cruise control button combination sequence, you can enable the option without reflashing the car! MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
• Torque Limit Adjustability - TCU 8HP Limiter Lifted for Gen 2 B48 and B58 platforms! Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery.
• Speed Limit Removal, Startup Roar, Torque by Gear Limiter and Burble Flame Map available on select software
• Ethanol Blends (up to E30) are built into our OTS maps and available using Switchable Maps (on select vehicles only)
• Cold start with CAT heating delete (racing/off-road use only)
• Sport Gauges (HP and TQ) adjustable by user!
• Custom flashing – flash custom maps prepared by us or other tuners/users
• OTS maps/ All OTS pack (subject to additional cost)
• Logger - log real time data and plot it into graphs for troubleshooting and optimizing (subject to additional cost)
• Cloud Log Viewer - Professional log viewing on logs.mgflasher.com
• Diagnostic- Read and clear BMW specific DTC's
• Reset various adaptations, restore coding
• CVN number (Checksum Verification Number) along with flashing counter stays untouched. This means our software will be virtually invisible to dealer level diagnostic tools
ALL future updates to the tune are FREE of cost. If we introduce a newer version, you won’t have to pay anything to get the upgrade
Supported vehicles:
BMW M140i/120i/125i/M135i F20/F21/F40
BMW M240i/220i/225i/230i/228i/M235i - F22/F23/F44
BMW M340i/318i/320i/330i/330e - F30/F31/F34/G20/G21/G28
BMW M440i/420i/430i - F32/F33/F36/G22
BMW 540i/520i/530i/530e - G30/G31/G38
BMW 640i/630i - G32
BMW 740i/740Li/730i/730Li/740e/740Le - G11/G12
BMW 840i - G14/G15/G16
BMW X1 20i/25i/28i -F48
BMW X2 20i/25i/28i/M35i - F39
BMW X3 M40i/20i/30i - G01
BMW X4 M40i/20i/30i - G02
BMW X5 40i - G05
BMW X6 40i - G06
BMW X7 40i - G07
BMW Z4 M40i - G29
BMW Z4 20i/30i - G29
Toyota Supra - A90
Version history
379
2023-09-01
- Less amount of user messages during flash process
- Extended unlocked bootloader detection to support Mission Tuning's M-Link tool
--PREVIOUSLY
- Analytics data adjustment
- progress value for pending page
- fixed app crash for some devices during car connection
- Extended unlocked bootloader detection to support Mission Tuning's M-Link tool
--PREVIOUSLY
- Analytics data adjustment
- progress value for pending page
- fixed app crash for some devices during car connection
378
2023-08-28
- Analytics data adjustment
--PREVIOUSLY
- progress value for pending page
- fixed app crash for some devices during car connection
--PREVIOUSLY
- progress value for pending page
- fixed app crash for some devices during car connection
377
2023-08-24
- progress value for pending page
- fixed app crash for some devices during car connection
- fixed app crash for some devices during car connection
376
2023-08-21
Changed
- Decrease app startup time
---PREVIOUSLY
Changed
- App internal files management adjustment
- Decrease app startup time
---PREVIOUSLY
Changed
- App internal files management adjustment
375
2023-08-07
Changed
- App internal files management adjustment
---PREVIOUSLY
Changed
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
- App internal files management adjustment
---PREVIOUSLY
Changed
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
372
2023-06-12
Changed
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
---PREVIOUSLY
Changed
- Updated link to MG Flasher Logs Cloud - China
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
- Updated error message info when missing addresses
- Corrected Ethanol Custom Option requirements
- Custom options - in-app adjustment performance improvement
---PREVIOUSLY
Changed
- Updated link to MG Flasher Logs Cloud - China
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
371
2023-06-02
Changed
Updated link to MG Flasher Logs Cloud - China
---PREVIOUSLY
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
Updated link to MG Flasher Logs Cloud - China
---PREVIOUSLY
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
370
2023-05-30
Added
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
- Gen 1 G-Series Custom Code and OTS map support
- DTC codes for Dcat and OPF delete
369
2023-05-18
Changed
- Resolved missing addresses when using custom code diagnostic on non-beta CC versions
- Missing OTS Maps feedback prompt will be shown only after redeem
- Resolved missing addresses when using custom code diagnostic on non-beta CC versions
- Missing OTS Maps feedback prompt will be shown only after redeem
368
2023-05-03
- Better recognition of S58/S63 engines
- Resolved login issues
--- PREVIOUSLY
- Review prompt will be visible only when car is already flashed by our OTS map
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
- Resolved login issues
--- PREVIOUSLY
- Review prompt will be visible only when car is already flashed by our OTS map
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
366
2023-04-27
- Review prompt will be visible only when car is already flashed by our OTS map
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
--- PREVIOUSLY
- Resolved bug with flashing back to full stock on Femto ECUs
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
- User DTCs selection enriched with confirmation popup and code descriptions (for subset of them only)
- Popup with information that car was flashed on other device
- Allow to remove DTC codes selected by user
- Car details page
- Car flashing history page
- Improved restoring coding (CAFD) backups
- Custom Code Diagnostic page won't show missing address error when no diag options are available for the installed CC version
--- PREVIOUSLY
- Resolved bug with flashing back to full stock on Femto ECUs
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
365
2023-03-22
- Resolved bug with flashing back to full stock on Femto ECUs
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
---Previous
- Corrected saving of Burble Upshift settings
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
- Recognition of custom code older than v0.5 with Femto ECUs allows flashing
---Previous
- Corrected saving of Burble Upshift settings
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
364
2023-03-13
- Corrected saving of Burble Upshift settings
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
--PREVIOUSLY
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
- Torque limiter option fix for Femto unlocked ECUs with untagged Custom Code versions (older than v0.5)
- Display popup to user when some required files are missing and sync is required.
--PREVIOUSLY
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
363
2023-03-08
Changed
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
--PREVIOSULY
Added
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
- Custom code offering for some cars skipped
- Speedup the new logger & custom code features distribution by providing more data from server
- Additional checks for SWFL flashing on Femto unlocked vehicles
--PREVIOSULY
Added
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
362
2023-03-06
Added
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
- Up shift Burble (farts)
- Set OEM, Soft or Hard
- Custom Code Feature Diagnostic Page (Found under the Diagnostic Page)
- Allows you to configure Custom Code On-The-Fly directly from the app
- Antilag Standing RPM Setpoint
- Burble Slot
- Ethanol Override Status/Value (CC v7.1+)
- Exhaust Flap Status (CC v7.1+)
- Max Cooling Status
- Switchable Map Slot
- Valet Mode Status (CC v7.1+)
Changed
- Updated map addresses for Custom Code v7.0.1 (EEPROM storage & Antilag fix)
- Improved method of ECU / Car detection
- Corrected antilag duration logging parameter (was missing factor of 10)
- Resolved Valet Mode max pedal position overflow value (CC v7.1+)
360
2023-02-18
- Resolved missing custom options for select engines
- Added detection of bFlash's new bench unlock
- Handle not resolved cc version during car activation flash step
--PREVIOUSLY
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
- Added detection of bFlash's new bench unlock
- Handle not resolved cc version during car activation flash step
--PREVIOUSLY
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
358
2023-02-15
Added
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
Changed
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
- Custom Code update via cloud support
- Option to flash without any custom code (v0.0)
- Ethanol content logging for CAN bus based sensors from Custom Code v7.0+
Changed
- Adjusted 3rd party unlock recognition and message popup
- Resolve logger bug with invalid Custom Code parameter values
- Fixed "NO TITLE" presentation while asking user for something through popup
- User won't see empty stage versions page when OTS Map is not prepared yet
357
2022-12-11
- Popup information that ots maps are not yet available as a part of redeem process. User will be able to create support request immediately.
- Initial support for Alpina S58 BTLD 78E8
- Logger Alerts (Beta)
- Support for additional ENET adapters
--Previously
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
- Initial support for Alpina S58 BTLD 78E8
- Logger Alerts (Beta)
- Support for additional ENET adapters
--Previously
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
356
2022-11-23
Added
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
- Flashing and logging support for:
- SWFL 3076-080.029.007 (R1C9J8I7B)
- SWFL 5C64-020.080.007 (F4C9L8G7B)
- SWFL 5D55-080.072.009 (R4C9L8P9B)
- Wastegate diagnostics (test endstops or set to open, close, or auto)
355
2022-11-15
- Added new custom option for aftermarket intakes, to remove DTCs
- Resolve the issue with S58 engine code recognition
- Resolve the issue with S58 engine code recognition
354
2022-10-26
- Initial support for flashing/logging SWFL 7972-080.072.012 (R4C9L8PCB)
- Adjusted Decat flashing option to remove DTC code 12AD01
- Corrected custom option addressing for F-Series SWFL 7972
- Better StockMap file marking in map files page
- Resolved visibility of Burble CW_SOUND for non-debugging items
- Adjusted Decat flashing option to remove DTC code 12AD01
- Corrected custom option addressing for F-Series SWFL 7972
- Better StockMap file marking in map files page
- Resolved visibility of Burble CW_SOUND for non-debugging items
352
2022-09-22
Added:
- Initial support for new F-Series bootloaders 7226 & 722A
- Custom option and logging support for F-Series SWFL 7972
- Initial support for new F-Series bootloaders 7226 & 722A
- Custom option and logging support for F-Series SWFL 7972
351
2022-09-14
Added:
- Restore necessary data from server when car is in bootmode.
Changed:
- Increase idle rpm options to 1500 RPM
- Improved rescue from bootmode (failed flashes)
- Resolved Torque by Gear limiter on select Hybrid software
- Restore necessary data from server when car is in bootmode.
Changed:
- Increase idle rpm options to 1500 RPM
- Improved rescue from bootmode (failed flashes)
- Resolved Torque by Gear limiter on select Hybrid software
350
2022-09-02
- Typo "idleing" => "idling"
- Resolved car recognition issue
- Resolved car recognition issue
349
2022-08-27
- Added idle custom option
- Base idle
- Clutch-out idle delay (6MT)
- Clutch-in idle (6MT)
- Clutch-in fast RPM change (6MT)
- Sync user adjusted custom options and user defined 'car name / picture' between different devices
- Fixed issue where engine have not been detected by app.
- Resolved failed flashing retries when flashing OTS or custom map
- Added bootmode detection to ECU Info page
- Custom Code Update available popup will be shown only once
- Resolved missing/null targetCustomCodeVersion when flashing custom maps on select software versions
- Base idle
- Clutch-out idle delay (6MT)
- Clutch-in idle (6MT)
- Clutch-in fast RPM change (6MT)
- Sync user adjusted custom options and user defined 'car name / picture' between different devices
- Fixed issue where engine have not been detected by app.
- Resolved failed flashing retries when flashing OTS or custom map
- Added bootmode detection to ECU Info page
- Custom Code Update available popup will be shown only once
- Resolved missing/null targetCustomCodeVersion when flashing custom maps on select software versions
Ways to hack MG Flasher
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download MG Flasher MOD APK
Request a Hack
Ratings
4.7 out of 5
69 Ratings
Reviews
stock240,
Best ECU flash for B58 even at high altitude
Having tested MHD and BM3, by recollecting data from logs, dyno and dragy times, I can tell that by far MG flasher has the best OTS maps available for the B58 engine. The time gains in high altitude environments (8600ft) and low altitude envs is remarkable, without putting the engine components under maximum stress (from the data I’ve read on the logs testing the multiple maps they offer) which make them very reliable maps. I’ve been running stage 2 for 1 year in a 2018 M240i with 0 issues. Also the app is very well crafted and easy to use. The flash itself is very smooth, and it has great features such as map switching on the fly which is great feature for those out there using pump gas for the regular commute and E30 on the weekends. Their support is great and they always listen an reply to your questions in a timely fashion. I just have positive words for MG flasher and no complains, keep the great work guys.
NicOttawa,
Great product great support
This product is awesome. The extra power for my B58 is kick-in-the-pants noticeable. I’ve sent them a question twice now and both times responded quickly and helpfully. Highly recommend.
Pekkaisawesome,
The best tuning company!
Been using these guys for about a year, anytime I have ever had a question they were quick to get back to me and help me. These guys special in a couple bmw models and IMO are masters at their craft!
bambam_f30,
Great app
Love how easy it is to use and great tunes
Bumboo whole,
MG
Amazing platform
Allojax,
Review
I’ve been using MG Flasher since I believe March 2019, I’ve put roughly 20k miles on my 2018 340i XDrive since release and it’s awesome. I started with the android app and switched to iOS when it was released. It’s cloud based now so you aren’t locked into a specific system anymore. I flashed initially with cable but now use the Thor wifi adapter. The car feels great, beast at times when I push it, it’s the ultimate sleeper and daily driver. I also flashed with the recommended xHP transmission flash, running stage 3. I drove the mg flasher stage 1 for roughly 2/3 of the miles and the last 1/3 with stage 2 since I installed the Precision CG-1 downpipe and BMS intake. I’ve had zero issues, absolutely none. This is my first BMW and now I’m spoiled. I’ve read about how people have to remove the ecu to unlock and mail away for the G20 and for other brands. This is so easy it’s ridiculous. I haven’t dyno tuned, but the car must be in the 480-500HP at the crank range now. I’m looking forward to stage 3 once it’s released.
reviw.@,
Spam
Spam
