MotorCare Hack 3.0.4 + Redeem Codes

I love the app and wish they might do some integration with shortcuts for a widget or something like that, but what I really would like to see from the app is separate alarms for front and rear tires. The pressure in the front tire of a motorcycle is almost always 2-5 psi less than the rear tire. I think having a low psi for front alarm and a low psi for rear alarm separate, would go a long way with bikers.

The app works and is easy to use. There is only one tire pressure alert setting, as another reviewer noted. I am not particularly concerned about that, as I set it 1psi below the lower psi tire. My issue with the app is that it is hard to tell if it is connected to the sensor. It takes about 10-15 seconds for it to update once the app is opened. It would be nice if there was an indicator which confirmed the reading is up to date. Other than that, very good.

So far the sensors and App work as advertised. The sensors came with batteries and the application reads sensor battery life; mine were delivered with 85% Life remaining. The instructions were pretty strait forward and set up in IOS was simple. I agree with other reviewers in that the color contrast is very light and it would be better for riding if the application rotated. Suggestion for the app developer: use a darker color palette with more contrast.

My app is showing tire pressure on one tire even though both sensors are removed and sitting in my office which is 15 miles away. Sometimes the reading seems accurate, other times it is clearly made up (of previous readings, I suppose) as it is right now.

I removed them because I was taking the bike in for service but forgot to put them back on and left them in the office. How can there be a reading for a sensor that is miles away and not installed on a tire?

I like the TPMS sensors. Very easy to set up. The App however needs work. My motorcycle has 2 different pressures. The front is 36 psi and the rear is 40psi. In the App system Settings, there is only a wsy to set 1 tire psi high and low settings for alerts. There needs to be 1 setting for each tire because of different tire pressures. 1 for each tire.

The latest release is working well. A suggestion for the developer is to include the time stamp of the last pressure reading. This would help understand if the pressure reading is current or old.

New app is a huge improvement and provides instant reading. Very useful especially when riding in extreme temperatures

The install was easy in the app download was easy as well. The only issue is there are very few changes you can make to the app it’s self. For instance, the opening screen in portrait mode has colors that blend together and is near impossible to read while on the road. It does have a heads up display modeThat is much easier to read that runs in landscape mode on the phone but I do not ride with my phone in landscape mode. The device pairing was a bit difficult because it does not tell you if the device is actually paired and it does not give a pressure read out immediately. I was running a pressure monitoring system previously that had a screen mounted to the handlebars and I like this much better because it runs through my phone and sends alerts if anything goes wrong. This is a great little system!

Main monitoring screen requires mayor color adjustments, it is imposible to view white font tire pressure and temperature readings with light blue background. Other than this important issue all runs smooth.

I installed app once, did binding. Looked ok. Told me tire pressure. Opened later, no readings. No way to “refresh”. No troubleshooting. Uninstalled app, did binding again. Showed tire pressure. But no Bluetooth connection shows up in settings. Still no way to refresh readings. Temp and tire pressure frozen on what it was at start. The manual that came with it is bad. Not even sure it is working. Probably going to return devices.