NDI PTZ Control Hack 1.0.2 + Redeem Codes
The ultimate NDI PTZ app
Developer: BirdDog Australia PTY LTD
Category: Photo & Video
Price: $19.99 (Download for free)
Version: 1.0.2
ID: BirdDog.CameraController
Screenshots
Description
NDI PTZ Control is the ultimate iOS app with support for all NDI PTZ regardless of manufacturer. Featuring full Pan, Tilt, Zoom control including a live joystick, and save and recall pre-set PTZ positions. The inbuilt viewing monitor allows viewing of any NDI, NDI HX2, and NDI HX3 source in full screen.
NDI PTZ Control becomes even more powerful for BirdDog PTZ Camera users with Cam Control built in to access all the Colour Matrix tools to shade your BirdDog PTZ camera.
All this from an iPad or iPhone.
NDI PTZ Control becomes even more powerful for BirdDog PTZ Camera users with Cam Control built in to access all the Colour Matrix tools to shade your BirdDog PTZ camera.
All this from an iPad or iPhone.
Version history
1.0.2
2023-05-31
- Added NDI Groups / NDI Discovery Server / Remote IPs support
- Added source filter
- Under the hood performance and stability improvements
- Added source filter
- Under the hood performance and stability improvements
1.0.1
2023-04-28
- Minor UI improvements
- Improved screenshots
- Improved screenshots
1.0.0
2023-04-15
Ways to hack NDI PTZ Control
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download NDI PTZ Control MOD APK
Request a Hack
Ratings
3.8 out of 5
5 Ratings
Reviews
sebasscornell,
Please add option for Discovery Servers
Big fan of BirdDog products from hardware to software. Working with about 60 encode/decode HDMI, 6 ptz, and 4 box cams it’s fantastic to have quick access to a viewer and now controller. I swapped a P400 off the discovery server and showed up as you’d expect. Easy and quick use from an iPhone. Like the other reviewer there are UI bugs but for a first release I’m excited to see where this app goes!
Garth Braithwaite,
A fantastic app, missing one thing.
It's more expensive than I would have expected, but it does a great job controlling BirdDog cameras on the local network.
The only thing it really needs is support for gamepads. iOS supports a generic gamepad interface that could make this app so much easier to control than the touch screen.
The only thing it really needs is support for gamepads. iOS supports a generic gamepad interface that could make this app so much easier to control than the touch screen.
Sautez,
UI needs some element work
On first glance and running through the app I like the items but there are some glaring issues that it seems all remote controls apps mess up.
Pros:
- Nice layout.
- Easy to setup and get going
- The video quality for WiFi is good
- The remote control is good for WiFi. Some latency to be expected.
- The ability to tune a camera in the room with the camera is ideal so lighting may be adjusted and setup of sets. Good for those who setup at different locations.
Cons:
- Not sure why but all the numbers on the settings are wrong. In the exposure settings area you have 6 for Iris when it is really 1.6. You have 4 for DB gain when it is really 10.4.
- The numbers for the sliders are right aligned. These should be center aligned on the slider and have the same look as the webUI. F2.0, 10.4DB, 1/60. This will keep UI’s consistent and we can see the full values.
- When a slider is adjusted in iOS the change shows up in the WebUI right away. But if you change in the WebUI it does not change in iOS. Polling issue.
- Some settings are just missing. Sharpness in iOS stops at 0 while in the WebUI you may go down to negative numbers. These should be consistent.
- Sliders for color have same issue as exposer. They don’t have current selection and worst they show 0 for gain when the WebUI shows 32 as a default. These need to match. Also, move the numbers to center so full numbers will show.
Summary:
I like the tool and look forward to the updates to fix the UI so you may actually use it to adjust the camera but as it stands now not seeing the full numbers is a big issue. The last UI for a remote camera I used in NDI had this same issue. Not sure why that would be but seems like a simple and vastly overlooked QA issue.
A good step to a remote tool. Seeing this on android and others would be great.
Pros:
- Nice layout.
- Easy to setup and get going
- The video quality for WiFi is good
- The remote control is good for WiFi. Some latency to be expected.
- The ability to tune a camera in the room with the camera is ideal so lighting may be adjusted and setup of sets. Good for those who setup at different locations.
Cons:
- Not sure why but all the numbers on the settings are wrong. In the exposure settings area you have 6 for Iris when it is really 1.6. You have 4 for DB gain when it is really 10.4.
- The numbers for the sliders are right aligned. These should be center aligned on the slider and have the same look as the webUI. F2.0, 10.4DB, 1/60. This will keep UI’s consistent and we can see the full values.
- When a slider is adjusted in iOS the change shows up in the WebUI right away. But if you change in the WebUI it does not change in iOS. Polling issue.
- Some settings are just missing. Sharpness in iOS stops at 0 while in the WebUI you may go down to negative numbers. These should be consistent.
- Sliders for color have same issue as exposer. They don’t have current selection and worst they show 0 for gain when the WebUI shows 32 as a default. These need to match. Also, move the numbers to center so full numbers will show.
Summary:
I like the tool and look forward to the updates to fix the UI so you may actually use it to adjust the camera but as it stands now not seeing the full numbers is a big issue. The last UI for a remote camera I used in NDI had this same issue. Not sure why that would be but seems like a simple and vastly overlooked QA issue.
A good step to a remote tool. Seeing this on android and others would be great.
TBTV Sports,
Great app
Very handy app for ptz control for Birddog deployments !
PMXProd.,
Can’t control Canon NDI PTZ
I purchased this app thinking I could control other NDI enabled PTZ cameras but I can’t find how to control the Canon CR-N300 cameras, I can only see the NDI feed.
