REALITi Hack 11.2.0 + Redeem Codes

New:

- Mindray D6 Monitor/defibrillator
- Zoll X Advanced with TBI dashboard

Improvements and Bug Fixes:

- Zoll X - 12 lead ECG patient information window
- Zoll X - Ability to change medications listed in Settings
- Zoll X - ETCO2 can now be seen in AED mode
- Zoll X - Defibrillator charges but does not shock
- Zoll X - Pacing dashboard shows on 12 lead view bug
- Zoll X - AED does not exit 12 lead bug
- Corpuls - demand pacer works in fixed mode bug
- Corpuls - Amplitude size works in D-ECG
- Corpuls - After inverting display colours in Defib mode some wrong colours occur bug
- Corpuls - CPR bar is above the selection highlight
- Mindray D3 - Alarms and ECG can not be silenced from the controller
- Mindray D3 - Alarm light is showing bug
- Generic monitor - shows silenced alarm icon by default but it actually is not silenced
- Generic monitor - alarm settings overrides the alarm enabled set by visibility settings
- Control - While adding an event and choosing to add Simscope sound, the text displayed on the left bottom should say, select SimScope - Sound Set in place of just SimScope Set and Stethoscope Tab instead of Cardionics Tab.
- Camera - CO2 Unit Name is always in mmHg despite the Settings value bug

- Improvements to Atlas connectivity
- TMS data can now be seen
- Improvements to CPR artefact on ECG waveform

Critical Changes
- Minimum supported iOS is iOS 13
- iPad naming ability within REALITi

Improvements
- Tempus 12 lead and NIBP user interface
- Improved ATLAS reconnection attempts on disconnect
- ATLAS ETCO2 ventilation improvements
- Zoll AED Improvements: Add ‘Pause’ button
- Zoll defibrillation improvements
- LP 20 clock improvement
- LP 15 SpO2 and NIBP improvements
- CPR Console - Rate and Depth improvements
- CPR Console - functions as an Additional Screen
- Sync shocks now indicated in TMS review
- Generic screen settings

Fixes
- Corpuls 3T - When tapping on the third curve in AED mode, the menu prompt should not open
- Corpuls - Countdown timer pie chart fix
- Propaq MD check pads error when patient isn’t attached but the user charges the device and only way to cancel the charge is to press the up or down arrow keys.
- Zoll X AED - show ETCO2
- Zoll X AED - When in pediatric mode should start at 50J
- CPR metronome should automatically resume after defibrillation
- Blood Pressure update on Camera
- Fixed menu flashing once when opened on the older 12.9" iPad (iOS 15.4.1) by removing the fade in/out, only slides now.
- NIBP sound and metronome not working at the same time
- Mindray B3 - Mute sound from Control Panel
- Show TMS on 12.9" iPad
- Control - Unable to select scenarios to add to email

Bug fixes and performance improvements

Bug fixes and performance improvements

Bug fixes and performance improvements

Fixes and enhancements.

Fixes and enhancements.

Fixes and enhancements.

Fixes and enhancements.

- Hamilton T1 enabled as an additional monitor.
- New CPR console with Atlas manikin integration.
- New generic defibrillator with CPR.
- Fixes and enhancements.

Bug fixes

New Features:

Hamilton T1
Transportable fully featured ICU ventilator for aeromedical and ambulances.
- Latest version 3 interface with Dynamic Lung
- Changes to ventilator settings automatically change SpO2 and ETCO2
- Integrated controls with patient disease states
- Variable alarms
- PCV, SIMV and SPONT modes
- Adult, paediatric, and neonatal ventilation

Zoll Propaq M
Rugged patient monitor for military and aeromedical operations.

Mindray BeneHeart C2
Full AED trainer starting from a closed state.
- Voice and graphical instructions.
- ECG waveform


Improvements:

REALITi
- Added notes from checklist to review section.
- Support for Macs with M series processors.

Generic screens
- Improved initial state of alarm button.


Bug fixes:

REALITi
- Improved connectivity between iPads.

Zoll Propaq MD
- Corrected default state of pacer.

Zoll X
- Improved CPR band integration.
- Improved capnography filtered view and colours.

Improved stability and performance.

- Tempus Pro UI improvements.
- Generic monitor enhancements.
- Set battery level on Schiller to match iPad battery level.
- Updated thumbnails for generic screens.
- Schiller Defiguard and Physioguard: Improvements to paediatric modes.
- Improved Zoll X pacer.
- Added support for setting CPR depth units.

• Fix an issue that prevented Tempus screens from being added in events.

• Tempus Pro
• Added heart beat icon.
• Fixed lead connection status for numerics.
• Arrhythmia learning text on cable change.
• Adjusted 12 lead titles.
• Corrected menu and back button for 12 lead ECG.

• Zoll X
• Fixed bug that caused high pitched sound when analysing.

• Corpuls 3 and 4
• Metronome now stops and pauses with scenario.

• Lifepak 15
• Improved waveform tracing bar.

• Improved performance and resolved crashes.

iSimulate has taken the innovative Tempus ALS dual device monitoring and defibrillation system and brought it to REALITi 360. In collaboration with Phillips, iSimulate have developed the simulated Tempus ALS premium screens in REALITi360.

By simply adding an additional iPad, you can now have 2 monitor screens running side-by-side. Each Tempus screen can be used to simulate monitoring or therapy functions separately.

Using the new Additional Monitor feature in REALITi 360, the screens can connect wirelessly to behave just like the Tempus ALS system. Both screens are controlled from a single Control iPad, providing a seamless simulated solution for trainers.

Just like the Tempus ALS, in simulated resuscitation cases the Tempus LS can focus on defibrillation therapy while the Tempus Pro can be used for complete simulated patient monitoring.
The Training Management System (TMS) provides a complete data rich export of the scenario for detailed debrief.

- Improved performance and resolved crashes.

- Philips MX800
- Fixed constraint error.
- Moved alarm message way from waveform.

- Philips HeartStart MRx
- Improved behaviour of CPR button.

- Corpuls 1, MX800, Corpuls AED and Capnostream 35
- Fixed a bug that caused waveforms to display as dotted lines.

- LifePak 20
- Improved waveform layout.

- Zoll R

- Added disarm feature.

- Lifepak 15

- Improved waveform display when starting.

- Enabled more devices as Additional Monitors.
- Generic Monitor
- Generic Basic numerics
- Generic Basic wave
- GE Carescape
- Philips MX800
- Connex Vital signs monitor
- Capnostream 35
- Schiller PHYSIOGARD Touch 7
- Tempus Pro

* Zoll X
* Added settings toggle for auto analyse.
* Added Check Patient text when waiting for manual analyse.
* Selection of pads / leads changes when defibrillator energy is selected.
* Set the waveform to change immediately when CPR button pressed.
* Zoll R
* Added language settings for prompts.
* Changed defibrillator startup behaviours to pads instead of leads.
* Zoll R and Zoll X.
* Added voice prompts and text.
* PUSH HARDER
* GOOD COMPRESSIONS
* LOW BATTERY
* CHECK PADS
* Zoll AED
* Added higher pitched sound for the remaining 10 seconds of defib charged.
* Added setting for disarm timeout.
* Philips Intellivue MX800.
* Replaced IBP Sys/Dia views with a single IBP view which includes the mean value.
* Added Report a Problem button on main screen.
* Changed monitors from premium to generic on included scenarios.
* Tidied up version info on main screen.
* Added settings for Generic Monitor.
* SpO2 sound changes pitch.
* Added settings for Generic Defibrillator
* Default energy.
* Escalate shock energy levels.
* Energy escalation protocol.
* Added settings for Generic AED.
* SpO2 sound change on pitch.
* Shock energy.
* AED and ADED voice settings.
* Advanced HR control.
* Simplified ectopics control.
* Improved tap behaviour of ectopics control.
* Improved UI on smaller iPads.
* Performance and stability improvements.
* Fixed bug which prevented adjusting alarms.
* Fixed bug that caused alarm settings rows to swap when scrolling.
* Resolved issue with ventilator not responding.
* Ventilator resets when scenario changes.
* Improved monitor selection.
* Added updating the active monitor on control when connected to monitor.
* Added changing active monitor when another facilitator changes the monitor.

Updates and Improvements:
Critical care waveforms on Zoll X and Propaq MD
corpuls3 improvements
LifePak 15 apnea alarm toggle in app settings
LifePak 15 patient default to male and age default to 50 on 12-lead.
Only show the Additional Information button on the main menu when the user taps the info button.

Bug Fixes:
Lab items not editable
Slider track invisible in dark mode on Control
Missing white space after number on email scenario

New Devices:
Corpuls 3 Touch, Corpuls AED

Updates and Improvements:
Configurable AED shock levels
Configurable default shock energy
Electrode placement shortcuts
Corpuls3 improvements
IntelliVue improvements
LifePak 20 & LifePak 15 improvements

Bug Fixes:
Continuous tone in scenario pause screen
NIBP not displayed after LifePak 15 is turned off and on
Imported media not synced when syncing scenarios

Updates and improvements
• Energy Select, Lead and Size popups auto close on LifePak 20

Bug Fixes:
• An issue with Remote Control
• Corpuls1 crash on iOS 9
• NIBP measurement starting automatically on Philips MX800

Additional Features
• Toggle in monitor picker in Control to set default type for new scenario

Updates and improvements
• Numerous improvements to Zoll ventilator and LifePak 15
• COVID-19 pneumonia lung sounds and CXRs
• Ability to add new checklist or lab items when editing an event
• Pacing in/decrement changed to 5 mA in Control
• Screen sharing instructions displayed in monitor right edge drawer when screen sharing is active
• Local network access permission request
• iOS default font across all non-skin/device screens

Bug Fixes:
• Incorrect CO2 value in kPa in Control
• Camera microphone audio still being airplayed when scenario is stopped or paused
• Audio not being played through connected Bluetooth speaker
• Control preview parameters always starting at zero
• Schiller R-ECG text cut off
• Ventilation sound only played once on some devices
• Corpuls1 not playing prompts in AED mode when set to use official sounds
• Shrunken dial on HeartStart MRx
• ECG trace still visible in MRx AED mode when pads are off
• Beep sound still being played when ECG is hidden in MRx AED mode
• “Connect Pads Cable” message not removed after pads are connected on MRx
• Disappeared MRx ECG waveform when lead is changed after acquiring 12 lead on MRx

• Fixed a bug that ART line waveform is not shown in preview.
• Fixed a bug with the new ventilator skin.

Additional Features
• New Remote Control which allows the REALITi Monitor, Chart and Camera to be controlled remotely by the Control iPad over the internet.
• New Zoll EMV+ ventilator
• New slider control option to control vital sign parameters
• New ability to manually send a 12 lead print out from Control

Updates and improvements
• 9.7"+ iPad support for monitors, AEDs, and ventilators
• Preview toggle to the scenario story editor
• Portuguese, Russian, and limited Turkish language support to REALITi
• Alarm configuration for the Phillips MX800
• Ability to zoom in on the Lifepak 1000
• Limited checklist grade range from -20 to 20
• Lifepak 15 facelift

Bug Fixes
• Audio not being played through connected Bluetooth devices
• Removed .0 for some integer parameters on the generic screen.
• Waveform stalling when screen recording
• A rare bug that stops some devices from showing the photo library
• Ghosting of labels on Phillips MRx
• Scenarios sometimes failing to download from community
• Various other fixes and stability improvements.

- Add three device filters to the main menu: Monitors, Defibrillators, Ventilators
- Add several new scenarios
- Update translations
- Bug fix: Unable to scroll through the scenario history window with a long text
- Bug fix: Welch Allyn Connex can’t get temperature panel to show Fahrenheit
- Bug fix: Ventilator can't rotate to portrait mode
- Bug fix: Imported media is not bundled into the exported scenario file
- Various stability improvements