SkyLoggerXXL Hack 6.6.1 + Redeem Codes
Developer: Hartwig Wiesmann
Category: Navigation
Price: $23.99 (Download for free)
Version: 6.6.1
ID: eu.skywind.skyloggerxxl
Screenshots
Description
SkyLoggerXXL sets standards for the professional or fun orientated glider, hangglider or paraglider pilot.
Based on the success of SkyLogger for the iPhone SkyLoggerXXL is a universal app that has been rewritten and optimized for the iPad and iPhone. It offers the same functionality for tracking flights as SkyLogger but goes with respect to its analysis capabilities and improved user interface far further:
- Apple Watch support;
- 2D & 3D flight data visualization;
- downloadable map data;
- large and individually adaptable instruments on a moving map allow best viewing comfort;
- north or in flight direction orientation of moving map;
- built-in live tracking support for Leonardo or Vgps servers
- visualization of previously flown flights as track traces on moving map;
- visualization of airspaces with user defined colors;
- instrument showing the distance and direction to the closest airspace;
- 3 axis acceleration measurements;
- tracked flights are stored in highly efficient internal database;
- default flight parameters can be stored and retrieved to make flight information entering for competitions easier;
- SkyLoggerXXL supports common file formats like IGC, CSV, GPX and KML;
- IGC files created by SkyLoggerXXL are OLC conform and can directly be sent to Leonardo, XCCup, XContest and XC globe based OLC servers;
- calculation of XC points for FAI triangle, triangle and free distance over 5 points;
- XC analysis (determination of FAI triangle areas);
- printing of flightbooks, flight information and statistics
- all diagrams, maps or charts can either be e-mailed or copied for incorporation into other apps;
- integration of SkyView database for exchanging waypoints;
- support of external accessories, like FlyNet, SensBox, SkyDrop, Skywatch BL and XC Tracer;
- weather data history of selected weather stations for the last 48 hours;
- online wind speed and direction visualization on maps for selected weather stations;
- visualization of hotspots;
- visualization of regions with thermals;
- and much much more!
Experience the new world of flight tracking and analysis. NOW!
Disclaimer: Continued use of GPS running in the background can dramatically decrease battery life.
Based on the success of SkyLogger for the iPhone SkyLoggerXXL is a universal app that has been rewritten and optimized for the iPad and iPhone. It offers the same functionality for tracking flights as SkyLogger but goes with respect to its analysis capabilities and improved user interface far further:
- Apple Watch support;
- 2D & 3D flight data visualization;
- downloadable map data;
- large and individually adaptable instruments on a moving map allow best viewing comfort;
- north or in flight direction orientation of moving map;
- built-in live tracking support for Leonardo or Vgps servers
- visualization of previously flown flights as track traces on moving map;
- visualization of airspaces with user defined colors;
- instrument showing the distance and direction to the closest airspace;
- 3 axis acceleration measurements;
- tracked flights are stored in highly efficient internal database;
- default flight parameters can be stored and retrieved to make flight information entering for competitions easier;
- SkyLoggerXXL supports common file formats like IGC, CSV, GPX and KML;
- IGC files created by SkyLoggerXXL are OLC conform and can directly be sent to Leonardo, XCCup, XContest and XC globe based OLC servers;
- calculation of XC points for FAI triangle, triangle and free distance over 5 points;
- XC analysis (determination of FAI triangle areas);
- printing of flightbooks, flight information and statistics
- all diagrams, maps or charts can either be e-mailed or copied for incorporation into other apps;
- integration of SkyView database for exchanging waypoints;
- support of external accessories, like FlyNet, SensBox, SkyDrop, Skywatch BL and XC Tracer;
- weather data history of selected weather stations for the last 48 hours;
- online wind speed and direction visualization on maps for selected weather stations;
- visualization of hotspots;
- visualization of regions with thermals;
- and much much more!
Experience the new world of flight tracking and analysis. NOW!
Disclaimer: Continued use of GPS running in the background can dramatically decrease battery life.
Version history
6.6.1
2022-06-11
Corrected UI layout for Apple Watches with screen sizes of 41 mm and 45 mm.
6.6.0
2022-05-26
This update supports the DHV-XC server's new upload protocol.
6.5.0
2022-03-13
Modified visualisation of flights in flight overview. Besides the key data of the flight the flight track is shown.
Additionally, some glitches related to iOS 15 have been removed.
Additionally, some glitches related to iOS 15 have been removed.
6.4.1
2020-10-05
- Adaptations for iOS 14
- Improved communication with Apple Watch
- Newly implemented help functionality
- Improved communication with Apple Watch
- Newly implemented help functionality
6.4.0
2020-04-30
Bug fixes
6.3.2
2020-01-24
Bug fixes
6.3.1
2019-07-05
Bug fixes
6.3.0
2019-06-21
Now, you can change the units of the flown distance, climb rate etc. to your own selected unit! The most common SI and imperial units are supported.
Furthermore, a couple of code and UI improvements have been made.
Furthermore, a couple of code and UI improvements have been made.
6.2.5
2019-04-15
Bug fixes
6.2.4
2019-02-05
Bug fixes
6.2.2
2019-01-17
Besides bug fixes this version implements an improved airspace indicator and uses as a default altitude instrument the built-in pressure sensor.
Improved airspace indicator: When being close to an airspace the airspace indicator visualises already the vertical height with respect to the airspace in flying direction. In the past the vertical height was only shown when being below, in or above an airspace.
Pressure sensor used by altimeter: the built-in pressure sensor (if available) is much more reliable in determining the altitude than a GPS sensor. Therefore, the pressure sensor becomes the default setting. This default setting can of course changed in the instrument’s settings.
PS: Uploading files via FTP will not be supported anymore in the next release!
Improved airspace indicator: When being close to an airspace the airspace indicator visualises already the vertical height with respect to the airspace in flying direction. In the past the vertical height was only shown when being below, in or above an airspace.
Pressure sensor used by altimeter: the built-in pressure sensor (if available) is much more reliable in determining the altitude than a GPS sensor. Therefore, the pressure sensor becomes the default setting. This default setting can of course changed in the instrument’s settings.
PS: Uploading files via FTP will not be supported anymore in the next release!
6.2.1
2018-10-23
The entry of individual variometer sounds has been improved.
6.2.0
2018-08-10
This version extends the (optional) airspaces module. Besides the visual airspace distance indicator instrument acoustic signal can now be activated to warn when entering areas around airspaces. Also when entering an airspace an acoustic signal can be activated. The closer the pilot is to an airspace the higher the signal's frequency is. If the pilot is above or under an airspace also the number of signals increase. When entering an airspace the frequency as well as the number of signals further increase.
In the default configuration acoustic signals besides when entering an airspace are deactivated!
In the default configuration acoustic signals besides when entering an airspace are deactivated!
6.1.7
2018-06-18
Airspace indicator improvements
Now, the (optional) airspace indicator shows a negative height when being below an airspace and a positive height when being above an airspace.
Now, the (optional) airspace indicator shows a negative height when being below an airspace and a positive height when being above an airspace.
6.1.6
2018-06-08
Bug fixes
6.1.5
2018-06-04
Bug fixes
6.1.4
2018-05-14
This update fixes issues when importing airspaces and handling routes.
6.1.3
2018-04-24
Bug fixes
6.1.2
2018-04-02
Bug fixes for iOS 9
6.1.1
2018-03-14
This update fixes an issue when uploading multiple files to the XContest server.
6.1.0
2017-06-13
The new version can import waypoints from CUP files that are stored in the app's document folder.
6.0.0
2017-03-13
SkyLoggerXXL becomes a universal app and can now be used on the iPhone and iPad!
When using SkyLoggerXXL on an iPhone full interaction with the Apple Watch is supported! In this case logging can be started and stopped from the Apple Watch. All major flight information are visualised on the display of the Apple Watch, like the current climb rate, ground speed, flying direction and the distance as well as the direction to next airspaces.
Furthermore, the new version supports two new external accessories:
- SkyDrop from skybean (optional) and
- Skywatch BL from JDC.
Both accessories can be connected using the Bluetooth LTE interface. Their sensors can be used for logging and data display instead of the built-in sensors.
When using SkyLoggerXXL on an iPhone full interaction with the Apple Watch is supported! In this case logging can be started and stopped from the Apple Watch. All major flight information are visualised on the display of the Apple Watch, like the current climb rate, ground speed, flying direction and the distance as well as the direction to next airspaces.
Furthermore, the new version supports two new external accessories:
- SkyDrop from skybean (optional) and
- Skywatch BL from JDC.
Both accessories can be connected using the Bluetooth LTE interface. Their sensors can be used for logging and data display instead of the built-in sensors.
5.5.1
2016-09-02
Bug fixes
5.5.0
2016-08-23
Support of new map tile source and removal of no longer available third party tile sources. Furthermore, the display of 2D or 3D maps based on third party tile sources has been significantly improved.
5.4.5
2016-08-12
Bug fixes
Cheat Codes for In-App Purchases
| Item | Price | iPhone/iPad | Android |
|---|---|---|---|
| Maps from 3rd parties (This module allows the visualization of maps from 3rd parties in 2D & 3D. 2D & 3D modules can also be bought separately but the combination of the two modules is cheaper than the sum of the two separate modules.) |
Free |
FH253434873✱✱✱✱✱ | 6AD87E2✱✱✱✱✱ |
| SkyDrop accessory (This option supports the SkyDrop Bluetooth LTE device. Using this device converts SkyLoggerXXL into a fully functional variometer!) |
Free |
FH399214475✱✱✱✱✱ | 2335589✱✱✱✱✱ |
| XC Tracer accessory (This option supports the XC Tracer Bluetooth LTE device. Using this device converts SkyLoggerXXL into a fully functional variometer!) |
Free |
FH531055657✱✱✱✱✱ | B479037✱✱✱✱✱ |
| SensBox accessory (This module supports the SensBox accessory. Files on the SensBox can be downloaded to the iPad. Furthermore, the user can choose whether SkyLoggerXXL uses location information from the SensBox for logging and to display flying information.) |
Free |
FH347653927✱✱✱✱✱ | 8E7CB9C✱✱✱✱✱ |
| 3D maps (This module allows the visualization of maps from 3rd parties in 3D, on a globe.) |
Free |
FH315493036✱✱✱✱✱ | 1A44186✱✱✱✱✱ |
| 2D maps from 3rd parties (This module adds maps whose data is based on 3rd party information. Currently maps from Thunderforest are supported.) |
Free |
FH579101735✱✱✱✱✱ | 27A2877✱✱✱✱✱ |
| FlyNet accessory (This module supports the FlyNet accessory from ASI. Using this accessory converts SkyLoggerXXL into a fully functional variometer!) |
Free |
FH191365334✱✱✱✱✱ | D2AACA3✱✱✱✱✱ |
| Accelerometer (This module allows the user to monitor the accelerations (3D) during a flight on an acceleration meter.) |
Free |
FH304801772✱✱✱✱✱ | 5ECCC18✱✱✱✱✱ |
Ways to hack SkyLoggerXXL
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download SkyLoggerXXL MOD APK
Request a Hack
