Spektrum AS3X Programmer Hack 1.1.7 + Redeem Codes
Developer: Horizon Hobby, Inc.
Category: Productivity
Price: Free
Version: 1.1.7
ID: com.horizonhobby.as3x
Screenshots
Description
This free AS3X® programming app is for use with next generation Spektrum™ AS3X receivers. Using its intuitive graphical interface you can:
- Create different AS3X flight modes
- Activate different wing and tail mixes
- Make servo adjustments: reverse, subtrim, travel and balance
- Adjust dual rate and expo
- Map output for each channel
- Make gain adjustments
And more!
It is compatible with the following Spektrum AS3X receivers:
· AR6335 6-Channel Nanolite (SPMAR6335)
· AR636 6-Channel Sport (SPMAR636)
· AR7350 7-Channel (SPMAR7350)
· AR9350 9-Channel (SPMAR9350)
A Spektrum AS3X Programming Cable with Audio Connector (SPMA3080) is required.
What is AS3X Technology?
AS3X (Artificial Stabilization – 3-aXis) technology is a combination of 3-axis sensors and exclusive software that works behind the scenes to smooth out the effects of disruptive forces like turbulence and torque. It doesn’t limit your control or fly the plane for you. You simply feel like you’re flying an expertly tuned model that does exactly what you want.
To learn more about AS3X technology, visit spektrumrc.com/AS3X.
- Create different AS3X flight modes
- Activate different wing and tail mixes
- Make servo adjustments: reverse, subtrim, travel and balance
- Adjust dual rate and expo
- Map output for each channel
- Make gain adjustments
And more!
It is compatible with the following Spektrum AS3X receivers:
· AR6335 6-Channel Nanolite (SPMAR6335)
· AR636 6-Channel Sport (SPMAR636)
· AR7350 7-Channel (SPMAR7350)
· AR9350 9-Channel (SPMAR9350)
A Spektrum AS3X Programming Cable with Audio Connector (SPMA3080) is required.
What is AS3X Technology?
AS3X (Artificial Stabilization – 3-aXis) technology is a combination of 3-axis sensors and exclusive software that works behind the scenes to smooth out the effects of disruptive forces like turbulence and torque. It doesn’t limit your control or fly the plane for you. You simply feel like you’re flying an expertly tuned model that does exactly what you want.
To learn more about AS3X technology, visit spektrumrc.com/AS3X.
Version history
1.1.7
2018-05-22
This app has been updated by Apple to display the Apple Watch app icon.
BLE Connectivity improved.
Additional Flight mode switch for AR7350 & Ar9350.
BLE Connectivity improved.
Additional Flight mode switch for AR7350 & Ar9350.
1.0.8
2016-11-07
Supports Bluetooth Programing Module
1.0.7
2015-11-15
Model Cache
Supports 9350,7350
Supports 9350,7350
1.0.6
2015-10-16
IOS 9 Fix
64bit support
64bit support
1.0.3
2015-04-24
French and Italian translations.
Night Visionaire Support
Night Visionaire Support
1.0.2
2014-06-12
Easily adjust the flight characteristics of your AS3X equipped aircraft using the Spektrum AS3X Programming Application, all from your mobile device.
New Features with this update include:
· German language support
New Features with this update include:
· German language support
1.0.1
2014-05-28
AS3X Receiver Programmer
1.0
2014-04-15
Ways to hack Spektrum AS3X Programmer
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Spektrum AS3X Programmer MOD APK
Request a Hack
Ratings
2.2 out of 5
58 Ratings
Reviews
Thor Reactor,
This app is horrible.
Typical Spektrum. You have to be a rocket scientist to understand the poorly written instructions for this app. Programming the receiver using my iPhone is extremely frustrating. Will never buy another receiver that needs a phone app to program. Great idea, poor software.
C182-Pilot,
Some missing, critical functions?
I’ve now played w this phone app & the PC app for most of the day. One thing I never know is if either of these apps has actually written anything to the receiver; I see NO indicator that reading or writing is taking place from either app nor a way to force either. I haven’t found an instruction manual for the apps yet either.
After using the PC app and setting up all my preferences; I wasn’t sure if they were ever written to the receiver; as far as I can see, there’s no function to cause a write or read to occur.
Following that, I connected my phone to the receiver, it didn’t seem to discover/read anything from the receiver and when my transmitter was ON, there weren’t 3 flight modes as I had set up w the PC app. Looks like the PC app saved the info on the PC but never wrote it to the receiver.
Seems like there’s some simple, essential things missing in the apps or I haven’t a clue what I’m doing!
After using the PC app and setting up all my preferences; I wasn’t sure if they were ever written to the receiver; as far as I can see, there’s no function to cause a write or read to occur.
Following that, I connected my phone to the receiver, it didn’t seem to discover/read anything from the receiver and when my transmitter was ON, there weren’t 3 flight modes as I had set up w the PC app. Looks like the PC app saved the info on the PC but never wrote it to the receiver.
Seems like there’s some simple, essential things missing in the apps or I haven’t a clue what I’m doing!
Gahspidy,
Good layout, easy to use.
I bought an 7350 AS3X rx to replace an ar8010t.
I also bought the Bluetooth dongle to connect to my iPhone 6plus.
Following the procedures described in the videos I plug the dongle in to rx, connect the rx battery/flight pack and then open the app. While the Bluetooth dongle is still blinking, tap the Bluetooth icon in the top left corner of app and select the rx. Connects in seconds.
Layout of the app is nice and easy to navigate. The only issue is the control surface graphics do not line up properly with the image of the plane on my iPhone but it’s easy to understand which are the ailerons, flaps, elevator etc.
Setting the rx up was fairly quick. I reversed elevator servo in the app, and the flap servo in the transmitter. Also set flap/elevator mix in transmitter as well as dual rates and expo.
This is applicable for the 7350 and 9350 as3x. I have heard that if using the 636 rx the dr and expo should be done in app/rx.
So far I’m very pleased with how easy the app let me adjust the 7350.
I also bought the Bluetooth dongle to connect to my iPhone 6plus.
Following the procedures described in the videos I plug the dongle in to rx, connect the rx battery/flight pack and then open the app. While the Bluetooth dongle is still blinking, tap the Bluetooth icon in the top left corner of app and select the rx. Connects in seconds.
Layout of the app is nice and easy to navigate. The only issue is the control surface graphics do not line up properly with the image of the plane on my iPhone but it’s easy to understand which are the ailerons, flaps, elevator etc.
Setting the rx up was fairly quick. I reversed elevator servo in the app, and the flap servo in the transmitter. Also set flap/elevator mix in transmitter as well as dual rates and expo.
This is applicable for the 7350 and 9350 as3x. I have heard that if using the 636 rx the dr and expo should be done in app/rx.
So far I’m very pleased with how easy the app let me adjust the 7350.
Cables55,
Not enough info from tech support and needs model import added in my opinion
So i have a turbo timber bnf from a friend that modified the gains . I want to set them back to stock gain settings. This app has about 5 models in it under add new model . It does not have import model so i can get factory model settings from spektrum into this app . I also wanted to know which flight mode was safe mode and tech did not know . Everything im reading suggests i get a windows computer that I don’t have to install factory programming that came in my turbo timber . So what is this app really for other than changing gains ? It needs all the factory setups for all horizon bnf planes in my opinion instead of the 5 that comes in this app . Just my opinion though
Woolyhair,
Nice App
This app is well laid out and does the job.
I am flying two planes using this on a iPhone 6S running iOS 10.3.3 an AR636 receiver and a DX6i transmitter. I especially like the "heading hold" feature for hand launching, but was disappointed there is no "safe" switch option available. The only annoyance is that the trim buttons on the radio do nothing. Maybe this is unique to the 6i. Thus trim is made through the surface set up or mechanically.
I am flying two planes using this on a iPhone 6S running iOS 10.3.3 an AR636 receiver and a DX6i transmitter. I especially like the "heading hold" feature for hand launching, but was disappointed there is no "safe" switch option available. The only annoyance is that the trim buttons on the radio do nothing. Maybe this is unique to the 6i. Thus trim is made through the surface set up or mechanically.
rcheli108,
Works great
I have two AR636 and two AR6335 AS3X receivers. Have been using this app to program/set up/tweak these four receivers without any problems well I should never say never but you get the point. This app had worked /is working on my iphone 4, 5, 6 and 6 plus. You must set the volume to max in order for the app to work properly.
FCVDM,
What a joke!
I can’t believe there is not an update yet. Last update over a year ago. Bought the AR636 AS3X technology a year ago or
more. Constantly drops connection during programming with Bluetooth IOS among many other bugs. Decided to use wired connection but also dropped. I will not carry my computer with me to the park. What’s the point?
I have two of these receivers in a box waiting for the app to improve.
In the meantime, there are more affordable gyro stabilizers with safe. For example, Hobby eagle A3. Works flawlessly and easy to program.
more. Constantly drops connection during programming with Bluetooth IOS among many other bugs. Decided to use wired connection but also dropped. I will not carry my computer with me to the park. What’s the point?
I have two of these receivers in a box waiting for the app to improve.
In the meantime, there are more affordable gyro stabilizers with safe. For example, Hobby eagle A3. Works flawlessly and easy to program.
txkflier,
Graphics misalignment..
When are they going to fix the graphics issues with this app? The control surfaces don’t line up with the image of the plane and it doesn’t show the values as you type them in.
AaronBmore,
Buggy and mostly unusable
I am so completely frustrated with the lack of any functionality. Every time i need to set up a plane, this program fails me. This program does not work properly. Too many problems to describe.
Mac Gramps,
Junk
I just received my replacement Bluetooth adapter and it is worse than the first one. At least the first one worked a couple of times. Too bad nobody cares enough to make it work properly.
