1.5.38
2023-07-30
Fixed crash when deleting while satellite camera is connected
1.5.36
2023-07-27
- Fixed a crash that could occur when disconnecting the satellite camera
1.5.34
2023-07-24
- Fixed a rare crash during video compositing process
- Fixed crashes and improved stability
1.5.32
2023-07-16
- Fixed crashes and improved stability
1.5.30
2023-07-14
- Fixed an issue where some audio and camera settings were displayed incorrectly compared to actual values.
- Fixed an issue where audio would sometimes noise be added when changing delays using auto-delay.
- Fixed problem where audio device detection could fail at startup
- Fixed crashes and improved stability
1.5.28
2023-07-14
- Fixed an issue where some audio and camera settings were displayed incorrectly compared to actual values.
- Fixed an issue where audio would sometimes noise be added when changing delays using auto-delay.
- Fixed crashes and improved stability
1.5.26
2023-07-11
- Fixed an issue where some audio and camera settings were displayed incorrectly compared to actual values.
- Fixed an issue where audio would sometimes noise be added when changing delays using auto-delay.
- Fixed an issue where noise could be added to some formats when playing back video and audio files.
1.5.24
2023-07-10
- Fixed an issue where some audio settings were displayed incorrectly
- Fixed other minor issues and improved stability
1.5.22
2023-06-29
- Fixed an issue where noise could be captured from the VRC-01 on some models.
- Minor bug fixes and stability improvements
1.5.20
2023-06-26
- Fixed an issue that could not close the live streaming properly
- Fixed other minor issues and improved stability
1.5.18
2023-06-23
- Improved performance of SPLIT, QUAD scenes
- Fixed other minor issues
1.5.16
2023-06-20
- Fixed disabled changing camera settings for satellite cameras when reconnecting.
- Fixed crash when switching scenes frequently
1.5.14
2023-06-11
from v1.5.6 update infomation
- Added the feature to use HEVC (H.265) as the video codec when streaming on YouTube (YouTube beta feature)
- Added UI to change target bitrate by tapping on the bitrate display during streaming.
- Changed the maximum execution time of transitions to 3 seconds(High performance model only)
- Fixed a scaling error in some still images during transitions
- Fixed an issue where the bitrate of the satellite camera was lower than specified when using iOS 16.4
- Fixed an issue that could cause display corruption when viewed in full-screen mode
- Fixed a crash in reconnect RTMP
- Fixed a crash that could occur when displaying a popover view showing INPUT status
- Fixed drop frame in some situation
- When PGM Direct mode is OFF, PST and PGM can be switched by flicking the preview image.
- Support for keyboard shortcut operations (INPUT, SCENE, MEDIA selection, etc. can be performed with the keyboard; press and hold the cmd key to see the keyboard shortcut list view)
- Other fixes to improve stability and performance
1.5.12
2023-06-06
from v1.5.6 update infomation
- Added the feature to use HEVC (H.265) as the video codec when streaming on YouTube (YouTube beta feature)
- Added UI to change target bitrate by tapping on the bitrate display during streaming.
- Changed the maximum execution time of transitions to 3 seconds(High performance model only)
- Fixed a scaling error in some still images during transitions
- Fixed an issue where the bitrate of the satellite camera was lower than specified when using iOS 16.4.
- Fixed crash in reconnect RTMP
- Fixed drop frame in some situation
- When PGM Direct mode is OFF, PST and PGM can be switched by flicking the preview image.
- Support for keyboard shortcut operations (INPUT, SCENE, MEDIA selection, etc. can be performed with the keyboard; press and hold the cmd key to see the keyboard shortcut list view)
- Other fixes to improve stability and performance
1.5.10
2023-06-02
from v1.5.6 update infomation
- Fix crash in reconnect RTMP
- Added the feature to use HEVC (H.265) as the video codec when streaming on YouTube (YouTube beta feature)
- Added UI to change target bitrate by tapping on the bitrate display during streaming.
- Changed the maximum execution time of transitions to 3 seconds.
- Fixed a scaling error in some still images during transitions
- Fixed an issue where the bitrate of the satellite camera was lower than specified when using iOS 16.4.
- When PGM Direct mode is OFF, PST and PGM can be switched by flicking the preview image.
- Support for keyboard shortcut operations (INPUT, SCENE, MEDIA selection, etc. can be performed with the keyboard; press and hold the cmd key to see the keyboard shortcut list view)
- Other fixes to improve stability and performance
1.5.8
2023-05-30
- Added the feature to use HEVC (H.265) as the video codec when streaming on YouTube (YouTube beta feature)
- Added UI to change target bitrate by tapping on the bitrate display during streaming.
- Changed the maximum execution time of transitions to 3 seconds.
- Fixed a scaling error in some still images during transitions
- Fixed an issue where the bitrate of the satellite camera was lower than specified when using iOS 16.4.
- When PGM Direct mode is OFF, PST and PGM can be switched by flicking the preview image.
- Support for keyboard shortcut operations (INPUT, SCENE, MEDIA selection, etc. can be performed with the keyboard; press and hold the cmd key to see the keyboard shortcut list view)
- Other fixes to improve stability and performance
1.5.6
2022-10-03
- Added a setting to enable reverb only on MIC1/2 (VRC-01 firmware must be set to 1.04 or later to use this setting)
- Added the ability to select and live programs that have already been created when streaming to YouTube Live
- Fixed the ability to select delay settings when streaming to YouTube Live
- Fixed an issue in camera settings where popovers would flicker when changing settings
1.5.4
2022-07-19
- Fixed crash when opening pad settings
- Fixed video overlay would not play in some case
- Fixed an issue where the streaming resolution would not change
1.5.2
2022-07-12
- Added SNS commenct view
- Support local recording remote control with AeroCaster Camera
- Support border position change on split scene
- Support crop on PinP/Overlay scene
1.3.4
2022-06-27
- Fixed an issue with some models where opening Outputs in Settings during live streaming would stop the streaming
- Changed to save media volume settings
- Changed to save lens selection and zoom settings for the built-in camera
- Fixed an issue where the camera settings popover would remain open after switching cameras
- Reduced noise during delivery on some models through performance tuning
- Fixed other minor issues
1.3.2
2022-06-14
- Enabled to run recording only without livestreaming
- Support for changing the target bitrate during livestreaming by tapping on the bitrate display
- Maintain resolution as much as possible when satellite camera is in static condition (supported since AeroCasterCamera v1.3.1)
- Default volume for playback of audio and video files has been lowered
- Added support for sorting Media and Scenes
- Added support still image and video media can be imported from "File"
- Support for displaying filename when importing audio and video files
- Fixed an issue where the text overlay would collapse if the length of the text was too large
- Fixed an issue where still image are displayed smaller in center in some case
- Fixed an issue where access timeout occurs and cannot be started on Youtube and Facebook livestreaming under high load on some older iPad models
- Fixed an issue that caused extremely slow operation when selecting an unassigned INPUT
- Fixed an issue where HDMI output would revert to mirror display even when program and preview display was selected
1.2.5
2022-04-20
- Fixed privacy settings were not applied when broadcasting on Facebook LIVE.
- Fixed switching lenses from the remote would take a long time and sometimes stop the video (AeroCaster Camera app upgrade is also required).
- Fixed noise in the audio stream when streaming or recording with older generation models.
- Fixed overlapping UI on some models.
- Fixed recording may fail if the RTMP connection is closed at the end of the streaming session.
- Other performance tuning and minor bug fixes.
1.2.4
2022-03-27
Improve streaming audio quality under heavy load
1.2.3
2022-03-23
- Fixed problem with title and description not being applied in Facebook Live
- Fixed minor issues
1.2.2
2022-03-11
Fixed a bug that could cause feedback in some environments during startup