bebird-Ear Care Specialist Hack 5.2.28 + Redeem Codes

I prefer to use this on iPad since it has a bigger screen and won’t complain about “no internet, switch to cellular data” like my iPhone does. The problem is this app does not seem to support landscape mode. I always have to rotate my iPad from landscape to vertical and then back to landscape to get the image to rotate and that can only be done from within the camera view, not the Home Screen. If they allowed the Home Screen to be landscape this would fix that issue. The other problem I have is the image is always mirrored/reversed. I have to tap the ear icon to flip it and then it’s correct but it never remembers this setting. Please allow this setting to be saved rather then being reverted to the backwards image each time. Finally in the latest few updates they keep popping up a message saying “matters need attending” telling me I need to check that the ear tip is firmly attached. There is no way to acknowledge the message to stop it from popping up everything single time I attempt to use the product. If these three things could be fixed the the app would be 5 stars. As for the product, it works well and I recommend it but I wish they made the tips smaller. Even the smallest blue rubber scoop is too big. A smaller one would make the job easier.

This ear probe device is a great little tool and worth every penny but it's a bit tricky. It charges up fast and even shows you on the app portion how much battery percentage you have so no guess work there. Since everyone's main complaint is how to connect, this is how I did that. I turned the ear probe on first. Then I went to my settings on my Ipad and be-bird showed up. I tapped be-bird which disconnected me from my network name on the list. I got a "no internet connection" which I then uninstalled and reinstalled the app. Again no internet connection. The instruction book says reboot my router but nope not doing that. Also it says contact my provider but again nope and in frustration I walked away and when I got back about five min later, lo and behold the app opened on my ipad, I gently inserted the probe and I was able to see inside my ear and get to the bottom of why my ear felt full and sore. Guess what---. Inflammation ; time to make a dr appt. This app could use some improvements on connectivity but I think it's an essential thing to have around the house together with a trusty thermometer, BP monitor and a good stethoscope all which are good to have if you want to know if its time to call the doc or go to the ER.

I have had my camera for about 9 months. Other than connecting to WiFi issues, which is no big deal if you just use data instead, I haven’t had too many issues. Occasionally it would freeze but again not too much of an issue as you just restart it and it’s all good. Well all of a sudden my camera screen in the app is green and pink. It’s almost like looking at a photograph negative I guess. I don’t know. I’ve tried cleaning my lens, deleting and reinstalling the app, letting the battery completely die and recharging it…nothing is working!!!! I’ve emailed the company and have gotten no response. Basically this camera is now useless. Sadly the company doesn’t seem to be helpful either.

First, the instructions (in the app or in the hard copy that comes with the device) clearly were not edited correctly, so some things make no sense. Next, be sure to use THIS app, not the “Bebird Pro” app which has much better reviews, but won’t work (not sure how that happens). When your device keeps dropping the wifi, turn off Bluetooth like many people recommends. It works great if you follow the instructions in the reviews.

As far as the “fit & finish” of the device, it is very well done. The pen feels sturdy and the charging holder that opens to yield tips inside is a great idea. I would give the device 5 stars but it seems like the company cheeped out on the app as it is more of a beta version vs production. That being said, the device is worth getting and I hope enough people complaining about the app will push the company to add some updates soon to fix stability and bugs.

While my device charged, I read some reviews and got scared and wondered if I shouldn’t waste my time and just return the device. I was able to get it to work in less than 3 mins. After switching your wifi to the bebird, you have to hit the button on the the device for it to turn on/off. I’m sure this is why so many people are having issues with connecting the device to their phone correctly.
It took less than an hour to charge and it says in the app how long you can use it before needing another charge (75mins) so charging it overnight like some people had issues of it not working properly.
If I can suggest, use the black accessory after becoming accustomed to the device. I scratched my inner ear thinking I needed that to “grab” the goo.

I just received my device today,and used it for the first time,everything went off without a hitch and I'm pleased with my purchase.
That said,I almost didn't buy this because of the app reviews and ratings,I'll go ahead and cover a couple things:
1)I didn't receive any ads,but I also declined the popup upon startup that was probably asking if I minded being sent ads (I do)
2)This is a WIFI DEVICE,which means you need to connect to it as you would a router,don't try to connect using Bluetooth because this is not a Bluetooth device
The first time I opened the app,I went to settings and disconnected from my router,and connected to the Bebird,it connected immediately and started working with no issues

Bought the “BeBird Note 5”. It just arrived. I was very excited to use it, however, I can’t.
1) The device doesn’t connect to the app. 2) The app directions say choose your model. The Note5 isn’t listed. 3). The directions also say connect to the WAN. Can’t do that. WAN is not an option on my iPhone. I do have local network on in my WIFI settings 4) Bebird eventually pops up as a WIFI option, HOWEVER, it is unsecured and I’m not going to reconfigure my WIFI. 3). When I tried to go to the website via the links provided to read up on their security permissions I got a warning that said their certification had expired 17 days ago and did I want to continue? I did not. Slick looking gadget but everything about it looks scammy. Why doesn’t it connect via Bluetooth? Why are the directions out of date? Etc, etc. It’s going back.

Quick tip: turn your Bluetooth off, as it appears to interfere with your pick connection

I followed the instructions, got all the way to the point where I connected to my Wi-Fi, went back into the app, hit start, it never found the camera and after about 10 seconds would flip back to the “Connect to Wi-Fi” screen in the app. Since people were saying Bluetooth had issues, I turned my Bluetooth off. Tried again and it worked like a charm. So if you were having the same issues where it keeps flipping your back to the Wi-Fi connection instructions, try turning off your Bluetooth and repeat the connection to Wi-Fi step.

Easily connected my iPhone 11 Pro to bebird WiFi on first try and was able to use scope and app within minutes. Video is clear. App is simple and straightforward. No complaints.

I see some reviewers could not connect probe to phone. I am wondering if they are trying to connect as if it were a Bluetooth device, which this is not, instead of joining the bebird WiFi network that appears after bebird probe is powered on??

Also if battery is low probe will connect to phone momentarily but will shutoff which will terminate the WiFi connection. All you have to do is charge the probe or use while it is plugged in.

I have the M9 pro... here’s what I did to make it work.

First, the device charges on a computer... but it can’t be plugged in when you use it. So step one is... unplug!

Second, it won’t connect unless you take the cap off the “pen”/ stylus/“ear looker”.... can be in or out of base. Step two: uncap.

Third: For iPhone: go to settings/WiFi/networks other. The phone may take a minute or two to “discover” other networks. You will now see bebird... select it! Watch for the check mark saying you are connected.

Fourth, go to the app on your phone. Hit the three lines at the top left: choose your device (hint: it’s on the back of the box it came in).

Last: hit start. Yes, there is a block saying connect to WiFi... it’s just to tell you to do step 3. It’s a direction for you... not an actual connection. Hitting the picture of the house “start” button will allow you to start “bebirding”!

The short version: unplug/uncap/connect/start

Hope this helps!!