Buff Flash Control Hack 1.1.0 + Redeem Codes
Developer: Paul C. Buff, Inc.
Category: Photo & Video
Price: Free
Version: 1.1.0
ID: com.paulcbuff.PaulCBuff
Screenshots
Description
The Buff Flash Control app was created to help photographers take control of their lighting setups directly from their phone.
- KEY FEATURES -
SMART REMOTE CONTROL
Use the HUB remote to find Paul C. Buff, Inc. flash units in your setup. Once added to your setup, you can control the power outputs of both the flash and modeling lamp, turn them on/off directly from your phone, and save your setups for future use.
LINK800WS FIRMWARE UPDATES
Update the firmware of the LINK800WS Flash Unit directly from the app using the HUB remote.
*Note: The Buff Flash Control app is only compatible with the Paul C. Buff, Inc. HUB remote and Paul C. Buff, Inc. flash units (AlienBees and newer). At this time this app is only capable of controlling the flash and model light outputs and saving lighting setups. Additional features are in development and will be released periodically.
- KEY FEATURES -
SMART REMOTE CONTROL
Use the HUB remote to find Paul C. Buff, Inc. flash units in your setup. Once added to your setup, you can control the power outputs of both the flash and modeling lamp, turn them on/off directly from your phone, and save your setups for future use.
LINK800WS FIRMWARE UPDATES
Update the firmware of the LINK800WS Flash Unit directly from the app using the HUB remote.
*Note: The Buff Flash Control app is only compatible with the Paul C. Buff, Inc. HUB remote and Paul C. Buff, Inc. flash units (AlienBees and newer). At this time this app is only capable of controlling the flash and model light outputs and saving lighting setups. Additional features are in development and will be released periodically.
Version history
1.1.0
2023-01-18
Over the past year we’ve been listening to all your feedback, and have made many improvements to the Buff Flash app. We’ve improved flash connectivity, flash scanning, and added several flash management features. We’re also happy to introduce a new feature: Test Flash!
1.0.7
2021-11-18
Bug fixes and performance improvements.
1.0.5
2021-10-31
Bug fixes and performance improvements.
1.0.4
2021-06-01
Bug fixes and improvements.
1.0.3
2021-04-08
Adjusted the way modeling lights are controlled while in tracking mode to make it easier to find your perfect offset.
1.0.2
2021-03-06
Bug fixes and improvements.
1.0.1
2021-02-12
Adds support for flash units connected via the CyberSync™ AC Powered Plus Receiver and the CyberSync™ Battery Powered Plus Receiver.
1.0
2021-02-11
Ways to hack Buff Flash Control
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Buff Flash Control MOD APK
Request a Hack
Ratings
2.5 out of 5
4 Ratings
Reviews
John Dikmen,
Great when it works!
As others have said, great concept. Unfortunately, I have this running on my iPad Pro at my fixed tethering station. I usually power on one light at a time and every time I power an additional light, I have to quit this app and relaunch it for it to find the new added light (s). Works about half the time. I work tethered in an indoor 15’x15’ space. I spend more time restarting this app and reconnecting to Capture One than I do taking photos! There is a button to discover additional Hubs, but not additional lights?
Nike Mutante,
Flaky
I set this up with a Buff Hub and 1 einstein strobe with no problem. Shot it a few times with that setupand it worked fine, the hub and strobe came up quickly and smoothly.
Then i tried to connect the second strobe and everything stopped working, even after rebooting everything all i got was spinny wheel in the app and couldn’t trigger either strobe any more.
That’s when i uninstalled this app and the $200 buff hub went back for a refund.
The quest for semi-reliable wireless flash trigger continues
Then i tried to connect the second strobe and everything stopped working, even after rebooting everything all i got was spinny wheel in the app and couldn’t trigger either strobe any more.
That’s when i uninstalled this app and the $200 buff hub went back for a refund.
The quest for semi-reliable wireless flash trigger continues
jmiron1,
Zero stars if possible.
Every time Paul Buff updates the app, it’s nothing but firmware errors when trying to update your Hub and your Link. Every. Singe. Time. Unacceptable.
michaelbakes,
Awful
I love the concept but this app and/or the HUB often disconnect from a light or two…or more…without alerting you. On the app, the light still appears to be connected so you’ll adjust your light output a tiny bit, take a shot, no change. Adjust it a little more, take a shot, no change. Then the frustrating realization that the changes indicated in the app didn’t effect light output at all. And don’t even think about using your phone for Bluetooth ANYTHING and expect it to stay connected to the HUB. I’ve spent far too much time eliminating interference and trouble shooting. I’m done with Buff Inc. This flaky system ( the app and the fairly expensive HUB unit that is useless without the app ) destroys the flow of a shoot.
ReallyIrritatedAudibleAppUser,
Absolutely Awful
This app is totally worthless, it doesn’t detect all of he strobes and loses connection with the strobes. And you have to re-detect the strobes when the phone comes out of Lock Screen. And the Hub trigger is equally useless, it misfires and battery life is terrible. I purchased a Raven TLC trigger which works beautifully. Come on Paul Buff you owe it to your customers to fix this disaster.
NWP,
Unusable
App is practically useless. Communication drops far too often to reliably utilize the hub system. Fantastic concept, but dreadful execution so far. If this cannot be corrected then I will move on to a different lighting system. Very disappointed.
Former PCB fan,
Not ready for consumer use
At best 5 minutes before it stops communicating with lights. Pretty useless system at the moment
