Epson Smart Panel Hack 4.6.2 + Redeem Codes

IF I COULD GIVE 10 STARS, I WOULD!
EPSON IS THE ABSOLUTE BEST. I plugged the printer in, hooked to wi-fi, downloaded the EPSON app and it immediately found the printer, connected, updated firmware. Worked. Everything worked in less than 10 min.
I had an hp printer, “had” being the key word here. I spent literally HOURS of my life going around and around and around, trying to get it to sync up on my phone with their app. which cannot automatically find the printer and once manually entered by IP address, won’t show up in the app. They have so much going on with their auto ink scam, that the functionality of their printers and their app are all compromised. Not to mention the 17 emails I got while trying to do a simple task of connecting my printer. Emails prompting me to complete the setup. …it was set up. Over and over again! Grrr! I even paid for a subscription and still spent more HOURS of my life, looking up troubleshooting, reading blogs, reading their website suggestions and even contacting them. All failed. Will never buy hp again.
Thank you soooooo much EPSON. I can’t tell you how happy I am!
Beautiful print quality on my ET-2803 btw.

When we first got this printer, we liked it; despite it having no touch screen, it seemed to work okay. And we were lured in by the economical ink use. However, it seems like every time we want to print, it has disconnected, and it cannot be found! 😡 Then we have to start setup all over again, and over again, and over again, and over again, ad infinitum! 😡. Do you know what it’s like to try entering a complex wifi password on their tiny “keyboard” with no touch screen? A very time consuming process that would be bad enough if we only had to do it once, but absolute torture to have to do it every other day! Grrrr! 😡Today I tried numerous times to re-connect this thing, but it failed every single time, both with wifi, and with the Ethernet connection, nothing worked! 😡. I’m getting pretty disgusted with this terrible printer, and pretty fed up! It’s still not connected, and it’s dead in the water, a pretty useless paperweight, as far as I can see right now! EPSON, why can’t you make a printer that actually consistently works, and stays connected to a network??? And don’t be blaming the network either, we have a very fast and very capable high speed network with a 1GB fiber connection, with most devices including this printer, connected through hard wired CAT8 Ethernet cables, except for our mobile devices. Epson, Let’s get your printer to consistently work for a change!

I bought this for me and my son’s school work since we are always needing to print documents all the time. Getting tired of running to the local fedex to print.
I bought additional ink didn't realize it already came with a set. I got this on sell for less than $70 and the ink cartridge is $50- a bit pricey.
The set up is pretty self explanatory just make sure you are following the instructions from the manual. I had synced this to my iphone and laptop with no issues. Test printed a photo as well and quality was perfect I will just need to purchase glossy photo paper and I am sure it will look great. The print didn't take long at all to process. I strongly recommend this product if you are looking for something reliable and affordable.

Epson seems to universally make their products difficult if not impossible to use with Apple products. While claiming that Epson printers are AirPrint compatible, I have yet to ever get an Epson printer to consistently work with AirPrint. I have returned 3 Epson printers and replaced them with Brother or Canon because those brands live up to their claims of being AirPrint compatible. The only reason I’m keeping the Epson printer I just bought is because it’s for my business which requires I use a PC for software reasons. But for my personal use I am exclusively Apple having am iPhone, 3 iPads, and a Mac, none of which can consistently connect to this printer via AirPrint. I managed somehow to get the stars to align and printed from one of my iPads twice but have not been able to get the iPad and printer connected since. However this stupid app, which I shouldn’t need since the printer is AirPrint compatible, can see the printer, no problem. That means that the printer is on the network and this iPad can see it but AirPrint isn’t working. There is little to no information about troubleshooting the AirPrint connection in the Epson documentation so I have to conclude that Epson is trying to force Apple users to use the Epson apps rather than AirPrint which is for the birds. I guess this printer will have to go back to the store too.

Just bought the 2400 eco tank model. Print speeds of black and white is great. Color is decent too. Photos are pretty slow. The app was pretty user friendly except when connecting to Wi-Fi. You just have to press the Wi-Fi button on the printer which I figured out on my own. Other than that setup was a breeze. I’m pretty happy over all. Prints over Wi-Fi easily from my phone if you select the documents from the app. The only part that is less than desirable is that it requires that you save the document then open the app and select that document to print it rather than it letting you print straight from an opened document. Overall would recommend this product.

I bought an Epson printer after years of HP - the salesperson convinced me it was superior to HP, mainly because of how the ink is refilled. However, I find it is FAR more difficult to use - it is not the least bit user friendly. I haven’t recently had to puzzle out how to refill the ink - I did it a while back and it seemed doable but I’m not confident about next time. HOWEVER, everything else about it needs to be puzzled out each time I want to print something out. Also, there is a ridiculously long wait period for it to be ready to print after I turn it on so when I try to print and get an error message of “printer not ready” or “not detected” I don’t know if it isn’t being detected for some reason - such as not being connected - or just hasn’t taken its 15-minute warm-up time. I feel buying it was a mistake but since it’s new I’m stuck with it - I won’t make this mistake next time.

I very tied of you guys blocking my printer with the notice to upgrade. Just so you can control me, after I paid you for the printer that should be MINE! You want to tell me who’s and what ink to buy. I hate control and not letting Am-r-Rican out of debt. Church for your printer and leave us alone. We’re not a communist country. In fact, we’re not a country at all it’s a business..
Shame.
Rise your price on the printer, leave choses what ever we want and if the heads get clogged with the cheeper ink then we’ll buy another printer.
Every time I want to air print I got to get up and dismiss your “request for an update “ i don’t want your update! I want to stay in my wheelchair and print without have to get up where the printer is mounted and worry about falling because of you control.
Ed Rodriguez

Usually my reviews are always positive, but it is not the case with this one!! I am really frustrated with the way they make it!! If there is a way the Epson people could change this, it would be easier… well, ok, this app looks so cool, and when I downloaded it I thought I would NEVER regret. But oh boy, how wrong was I!! It has all these cool features that you can never get if you do it on your own without using it. So yeah, that is cool, but I even didn’t get to USE IT. The thing is, is that it tells you to find your printer (of course) but when you try to put in your Epson printer, it cannot find it!! Though I have it on, and when I want to print directly from the web or from photos, it works perfectly!! But when I try it on THIS APP, it doesn’t work! All the things that we have tried to do, it doesn’t work! So if that can PLEASE be changed, this app would be PERFECT

I downloaded this app to install and configure my new ET-3850 and it worked … up to a point. The first attempt put at charging the ink went nowhere so I backed up a step and restarted it. Worked ok the 2nd time around. It didn’t do much else after that. I opted to go down the path in the “Start Here” instruction guide that DIDN’T use the app and everything appears to have installed fine. Of course it took me through the ink recharge again and I had to manually connect to my Wi-Fi because the auto setup didn’t work, but being an IT techie guy it wasn’t a big deal. I pity the folks who are not tech savvy in trying to do this. I see a few support calls in there future. So far the printer works great! I replaced an Epson Workforce printer that I’ve had for 15 years.

Ok, so I got this printer about a couple of months ago. I haven’t tried printing documents yet. I basically got it to print labels for my business, that part works well. I had a photo of my husband and my self I wanted to print out, just a 4x6. The printer kept telling me wrong paper size, I checked and rechecked and it was right for what I wanted. Printed photo and about 1/2 way through printing, the paper slides and I ended up with a “rainbow “ effect on the end of my photo. So I printed again and same thing happened. I gave a 2 star because money is money theses days and you should be able to print good quality photos but not with this. Would I buy again? Yes, only for printing labels . Buy anther printer for photos because this one isn’t worth the money.