Falco Flash BLE 4.0 Hack 4.1 + Redeem Codes
Developer: Falco eMotors Inc
Category: Health & Fitness
Price: Free
Version: 4.1
ID: com.falcoemotors.FalcoFlashBLE1
Screenshots
Description
The app has the following functions:
Scanner Screen
Show list of all available Falco eDrives. after click on any one of them from list, we are connect to same falco eDrive.
Main Screen
Display speed in MPH or KPH, Battery Charge level (Minimum battery voltage should be 30V).
Total Duration of time for which Falco Flash has been connected to eDrive.
Display level of assistance
Assistance level can be increased by swapping the finger in the upward direction on the main screen (swap length should be more than 1 inch) once Hx motor is connected.
Do the same by swapping the finger downwards (swap length should be more than 1 inch) to decrease assistance level.
Connect and disconnect Falco Flash by using the single button on the main screen (White/blue round color button on the main screen-White for Start, Blue for Stop).
Emergency Stop can be activated by activating the Emergency Stop (Red Color) button on the main screen. Emergency Stop button will set the motor power level to -3.
Setting Screen
Motor ID Setting(You can see connected device id,also can set on the Falco eDrive through App)
Device Information (Displays Firmware Number and Turn On Voltage)
CRM Setting(Circumference setting )
Battery Selection
eDrive Data Screen
Displays following parameters
Voltage (V)
Current (A)
iWatts (Instantaneous Power )
Battery Capacity(Wh)
WH Consumed
WH Remaining
Watt Hour/KM
KM/Miles Range remaining
Temperature /Level (Power Level)
H Sensor Error
Torque Sensor Setting
App has the same motor control capability as the PC and MAC version. Torque sensor and individual power level adjustments are added.
Power Configurator
Screen allows Current clamp setting on different power level through Assist/Regen Mode.
Scanner Screen
Show list of all available Falco eDrives. after click on any one of them from list, we are connect to same falco eDrive.
Main Screen
Display speed in MPH or KPH, Battery Charge level (Minimum battery voltage should be 30V).
Total Duration of time for which Falco Flash has been connected to eDrive.
Display level of assistance
Assistance level can be increased by swapping the finger in the upward direction on the main screen (swap length should be more than 1 inch) once Hx motor is connected.
Do the same by swapping the finger downwards (swap length should be more than 1 inch) to decrease assistance level.
Connect and disconnect Falco Flash by using the single button on the main screen (White/blue round color button on the main screen-White for Start, Blue for Stop).
Emergency Stop can be activated by activating the Emergency Stop (Red Color) button on the main screen. Emergency Stop button will set the motor power level to -3.
Setting Screen
Motor ID Setting(You can see connected device id,also can set on the Falco eDrive through App)
Device Information (Displays Firmware Number and Turn On Voltage)
CRM Setting(Circumference setting )
Battery Selection
eDrive Data Screen
Displays following parameters
Voltage (V)
Current (A)
iWatts (Instantaneous Power )
Battery Capacity(Wh)
WH Consumed
WH Remaining
Watt Hour/KM
KM/Miles Range remaining
Temperature /Level (Power Level)
H Sensor Error
Torque Sensor Setting
App has the same motor control capability as the PC and MAC version. Torque sensor and individual power level adjustments are added.
Power Configurator
Screen allows Current clamp setting on different power level through Assist/Regen Mode.
Version history
4.1
2019-10-02
We have been working hard to bring in new updates and features regularly.
In this version some notable features include:
1. Added to read as per previous selected battery.
2. Added to read CRM setting message as per previous selected.
3. Replace Vertical as Add offset and Horizontal as Subtract offset in UI Design.
4.Some updates in UI Design.
In this version some notable features include:
1. Added to read as per previous selected battery.
2. Added to read CRM setting message as per previous selected.
3. Replace Vertical as Add offset and Horizontal as Subtract offset in UI Design.
4.Some updates in UI Design.
4.0
2019-09-26
We have been working hard to bring in new updates and features regularly.
In this version some notable features include:
1. Added to read as per previous selected battery.
2. Added to read CRM setting message as per previous selected.
3. Replace Vertical as Add offset and Horizontal as Subtract offset in UI Design.
4. This is same app format as iPhone app Falco Flash BLE 2.0
In this version some notable features include:
1. Added to read as per previous selected battery.
2. Added to read CRM setting message as per previous selected.
3. Replace Vertical as Add offset and Horizontal as Subtract offset in UI Design.
4. This is same app format as iPhone app Falco Flash BLE 2.0
2.6.3
2018-12-01
We have been working hard to bring in new updates and features regularly.
In this version some notable features include:
1.Added Auto read features to read battery, sensor and firmware at start.
2.This app is supportable All iPhone models including iPhone X/ Xs /Xr/ Xs max.
3.This is same app format as iPhone app Falco Flash BLE 1.9
In this version some notable features include:
1.Added Auto read features to read battery, sensor and firmware at start.
2.This app is supportable All iPhone models including iPhone X/ Xs /Xr/ Xs max.
3.This is same app format as iPhone app Falco Flash BLE 1.9
2.6.2
2018-11-30
We have been working hard to bring in new updates and features regularly.
In this version some notable features include:
1.Added Auto read features to read battery, sensor and firmware at start.
2.This app layout is supportable All iPhone models including iPhone X/ Xs /Xr/ Xs max.
3.This is same app format as iPhone app Falco Flash BLE 1.9
In this version some notable features include:
1.Added Auto read features to read battery, sensor and firmware at start.
2.This app layout is supportable All iPhone models including iPhone X/ Xs /Xr/ Xs max.
3.This is same app format as iPhone app Falco Flash BLE 1.9
2.6.1
2018-11-20
We have been working hard to bring in new updates and features regularly.
In this version some notable features include:
1.Added Auto read features to read battery, sensor and firmware at start.
2.This app layout is supportable All iPhone models including iPhone X/ Xs /Xr/ Xs max.
3.This is same app format as iPhone app Falco Flash BLE 1.9
In this version some notable features include:
1.Added Auto read features to read battery, sensor and firmware at start.
2.This app layout is supportable All iPhone models including iPhone X/ Xs /Xr/ Xs max.
3.This is same app format as iPhone app Falco Flash BLE 1.9
2.6
2018-11-17
1. This App support all available iPhones including iPhone X/ Xs /Xr/ Xs max.
2. Added Auto read features to read battery, sensor and firmware at start.
2. Added Auto read features to read battery, sensor and firmware at start.
1.9
2018-03-16
Ways to hack Falco Flash BLE 4.0
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Falco Flash BLE 4.0 MOD APK
Request a Hack
Ratings
4 out of 5
7 Ratings
Reviews
vandemaat,
Iphone 7
Only some functions. Work. The assist panel will not show on my iphone 7 and unable to change any settings like wheel size. The factory corrected the problem. All functions now work. Would like to see turbo button on app and reverse. They said that feature would be added in the future.
Rakesh k Dhawan,
What an extraordinary app
Amazingly versatile and flexible. Great level of customization for any eBike rider. Extremely impressive.
55Marie,
NOT WORKING FOR IPHONE X
Not working for iPhone X. Been waiting over a month. Very disappointed. Cannot properly operate motor.
