RCPano Hack 1.9.1 + Redeem Codes
360º Panorama with DJI devices
Developer: Peter Menzel
Category: Photo & Video
Price: $1.99 (Download for free)
Version: 1.9.1
ID: de.petermenzel.rcpano
Screenshots
Description
RCPano takes images for a 360° aerial panorama using your Phantom, Mavic, Inspire or Spark drone. Navigate your aircraft to the location you want to take the images and let RCPano do the rest. For ground based panoramas RCPano supports the OSMO Standard and OSMO+.
IMPORTANT! PLEASE READ:
• RCPano only works with the newest firmware versions!
• RCPano does not stitch the images. This has to be done using an external software.
• Currently only the Phantom 3 (Professional / Advanced), Phantom 4 (Standard / Advanced / Professional / Pro 2.0), Mavic Pro, Mavic Air, Mavic 2 (Pro / Zoom), Inspire (1 / 2), Spark, OSMO Standard and OSMO+ are supported. Other OSMO models might work but have not been tested.
• When you use the app for the first time, you MUST have a connection to the internet to register with DJI's servers.
• Advanced Positioning
RCPano checks altitude, pitch, roll and yaw ten times per second to maintain the aircrafts position as accurate as possible to minimize drifting and stitching errors.
• Rotation around the nodal point
Instead of rotating the drone with yaw commands (as you would do with your left stick on the remote), RCPano also utilizes pitch and roll to rotate the aircraft around the nodal point of the camera.
• Only take pictures that are needed
With RCPano, you configure the number of rows and columns the software will shoot images at. The nadir image (camera facing straight down) is always taken. Optionally, you can reduce the picture count when the camera is facing towards the ground while maintaining the overlapping percentage defined by the column count. This decreases the number of images for post processing and the time needed to shoot a full panorama.
• Multiple camera modes
Using RCPano you can operate the camera of your Phantom in three modes: M (manual), P (program) and TV (shutter). Also, you can set the white balance and AEB picture count. In AEB mode EV values up to ±3.0 are possible! All other parameters like picture style can be configured in the DJI GO App and will not be changed by RCPano. During operation, RCPano will show you the current ISO, shutter speed and EV, which can be changed as you would do in the DJI GO App.
• Exposure control depending on the row and the position of the sun
In manual mode the exposure can be increased when the camera moves to the ground. It also can be decreased when the camera moves towards the sun (sun not available for OSMO).
• Zenith with the OSMO
RCPano can operate the DJI OSMO to create the images for the zenith. Together with the images of the copter a true 360 degree panorama can be created.
• Nadir support for the OSMO
For ground based panoramas shot with the OSMO or OSMO+ RCPano assists you in creating the ground images (nadir).
• Models supported
Currently, only the Phantom 3 (Professional / Advanced), Phantom 4 (Standard / Advanced / Professional / Pro 2.0), Mavic Pro, Mavic Air, Mavic 2 (Pro / Zoom), Inspire (1 / 2), Spark, OSMO Standard and OSMO+ are supported.
• Stitching
RCPano does not stitch the images. This has to be done using an external software. RCPano creates Papywizard XML files to support stitching.
IMPORTANT! PLEASE READ:
• RCPano only works with the newest firmware versions!
• RCPano does not stitch the images. This has to be done using an external software.
• Currently only the Phantom 3 (Professional / Advanced), Phantom 4 (Standard / Advanced / Professional / Pro 2.0), Mavic Pro, Mavic Air, Mavic 2 (Pro / Zoom), Inspire (1 / 2), Spark, OSMO Standard and OSMO+ are supported. Other OSMO models might work but have not been tested.
• When you use the app for the first time, you MUST have a connection to the internet to register with DJI's servers.
• Advanced Positioning
RCPano checks altitude, pitch, roll and yaw ten times per second to maintain the aircrafts position as accurate as possible to minimize drifting and stitching errors.
• Rotation around the nodal point
Instead of rotating the drone with yaw commands (as you would do with your left stick on the remote), RCPano also utilizes pitch and roll to rotate the aircraft around the nodal point of the camera.
• Only take pictures that are needed
With RCPano, you configure the number of rows and columns the software will shoot images at. The nadir image (camera facing straight down) is always taken. Optionally, you can reduce the picture count when the camera is facing towards the ground while maintaining the overlapping percentage defined by the column count. This decreases the number of images for post processing and the time needed to shoot a full panorama.
• Multiple camera modes
Using RCPano you can operate the camera of your Phantom in three modes: M (manual), P (program) and TV (shutter). Also, you can set the white balance and AEB picture count. In AEB mode EV values up to ±3.0 are possible! All other parameters like picture style can be configured in the DJI GO App and will not be changed by RCPano. During operation, RCPano will show you the current ISO, shutter speed and EV, which can be changed as you would do in the DJI GO App.
• Exposure control depending on the row and the position of the sun
In manual mode the exposure can be increased when the camera moves to the ground. It also can be decreased when the camera moves towards the sun (sun not available for OSMO).
• Zenith with the OSMO
RCPano can operate the DJI OSMO to create the images for the zenith. Together with the images of the copter a true 360 degree panorama can be created.
• Nadir support for the OSMO
For ground based panoramas shot with the OSMO or OSMO+ RCPano assists you in creating the ground images (nadir).
• Models supported
Currently, only the Phantom 3 (Professional / Advanced), Phantom 4 (Standard / Advanced / Professional / Pro 2.0), Mavic Pro, Mavic Air, Mavic 2 (Pro / Zoom), Inspire (1 / 2), Spark, OSMO Standard and OSMO+ are supported.
• Stitching
RCPano does not stitch the images. This has to be done using an external software. RCPano creates Papywizard XML files to support stitching.
Version history
1.9.1
2020-05-06
- Fixed a bug in the column mode for drones
- Possibility to lock ISO in enhanced AEB mode
- Fixed an error in the recognition of the current position for devices without GPS
- Adjustments for iOS 13
- Minimum requirement iOS 11.4
- DJI SDK 4.11.2
- Possibility to lock ISO in enhanced AEB mode
- Fixed an error in the recognition of the current position for devices without GPS
- Adjustments for iOS 13
- Minimum requirement iOS 11.4
- DJI SDK 4.11.2
1.9
2019-08-20
- OSMO: Nadir pictures aligned the same way as the zenith images
- OSMO: Fixed a bug that could cause the nadir pictures to fail if the OSMO was rotated by the roll axis
- Up to 36 columns possible
- Display of the drone heading can be switched from -180º - 0º - 180º to 0º - 360º
- Fixed translations
- DJI SDK 4.10
- OSMO: Fixed a bug that could cause the nadir pictures to fail if the OSMO was rotated by the roll axis
- Up to 36 columns possible
- Display of the drone heading can be switched from -180º - 0º - 180º to 0º - 360º
- Fixed translations
- DJI SDK 4.10
1.8.1
2019-02-27
• The German language was used in all regions, even if English should be used.
Changes in version 1.8
• Pressing the stop button opens a window where you can either pause or abort shooting.
• To start shooting, the drone now has to be at least one meter above or BELOW the starting position.
• DJI SDK 4.9.1
Changes in version 1.8
• Pressing the stop button opens a window where you can either pause or abort shooting.
• To start shooting, the drone now has to be at least one meter above or BELOW the starting position.
• DJI SDK 4.9.1
1.8
2019-02-23
• Pressing the stop button opens a window where you can either pause or abort shooting.
• To start shooting, the drone now has to be at least one meter above or BELOW the starting position.
• DJI SDK 4.9.1
• To start shooting, the drone now has to be at least one meter above or BELOW the starting position.
• DJI SDK 4.9.1
1.7
2018-10-31
- Support for the Phantom 4 Pro 2.0, Mavic 2 Pro and Mavic 2 Zoom
- Creation of Papywizard XML files for PTGui or Autopano
- Inspire 2: Only the video feed of the main camera is shown
- Inspire: Before every shot the gimbals horizontal position is adjusted
- Updated Video-Framework, less energy consumption
- Fixed a crash after finishing the panorama in Enhanced AEB mode
- Fixed an error when using enhanced AEB with P or TV mode
- Drone position is more stable in enhanced AEB mode
- Aspect ratio is set depending on the sensor size of the device
- An Error is raised if the drone has reached the maximum allowed height or distance
- Maximum columns increased to 70% overlapping
- Improved connection establishment to the device
- App requires at least iOS 9
- Enhanced logging
- DJI SDK 4.7.1
- Creation of Papywizard XML files for PTGui or Autopano
- Inspire 2: Only the video feed of the main camera is shown
- Inspire: Before every shot the gimbals horizontal position is adjusted
- Updated Video-Framework, less energy consumption
- Fixed a crash after finishing the panorama in Enhanced AEB mode
- Fixed an error when using enhanced AEB with P or TV mode
- Drone position is more stable in enhanced AEB mode
- Aspect ratio is set depending on the sensor size of the device
- An Error is raised if the drone has reached the maximum allowed height or distance
- Maximum columns increased to 70% overlapping
- Improved connection establishment to the device
- App requires at least iOS 9
- Enhanced logging
- DJI SDK 4.7.1
1.6
2018-06-18
• Support for the Inspire 1
• Solved a problem detecting Mavic Air remote control.
• Solved a problem detecting correct position of flight mode switch on Mavic Air.
• Recognition of RTH status improved.
• The minimum flight altitude has been reduced to one meter.
• If the gimbal of the Inspire is operating in free mode, an error message is displayed.
• Solved a problem detecting Mavic Air remote control.
• Solved a problem detecting correct position of flight mode switch on Mavic Air.
• Recognition of RTH status improved.
• The minimum flight altitude has been reduced to one meter.
• If the gimbal of the Inspire is operating in free mode, an error message is displayed.
1.5
2018-05-26
• Support for the Inspire 2 and Mavic Air.
• Support for the portrait mode of the Mavic Pro.
• Support for row- or column based shooting (not Osmo).
• Support for cameras with zoom lenses.
• In AEB mode 7 images are enabled for all devices.
• Added possibility to take a single image with current settings.
• OSMO: No zenith image was taken.
• OSMO: The algorithm for zenith and first row has improved, there will be no more gaps in the zenith.
• OSMO: In manual exposure mode, an EV value can be set by which exposure is increased per row of the panorama starting with the first row below horizon.
• OSMO: The required battery charge was reduced to 5%.
• OSMO: Assistance for shooting the nadir.
• OSMO: If the OSMO is not correctly mounted on a tripod and the camera cannot be tilted enough, shooting is not aborted if the gimbals position differs less than 5° from the target position.
• Performance optimizations when rotating the drone.
• No rotation any more before shooting the nadir image.
• Additional information in the log file, which can be accessed using iTunes.
• Camera settings changed by the app will be restored after shooting. These include aspect ratio, ISO, exposure time und EV.
• After the panorama has been completed, the pilot regains control of the drone more quickly.
• Ability to turn off video output to save energy.
• Simplification of the process of registration and activation of the app.
• DJI SDK 4.5, resolves crashes on 32 bit devices.
• Support for the portrait mode of the Mavic Pro.
• Support for row- or column based shooting (not Osmo).
• Support for cameras with zoom lenses.
• In AEB mode 7 images are enabled for all devices.
• Added possibility to take a single image with current settings.
• OSMO: No zenith image was taken.
• OSMO: The algorithm for zenith and first row has improved, there will be no more gaps in the zenith.
• OSMO: In manual exposure mode, an EV value can be set by which exposure is increased per row of the panorama starting with the first row below horizon.
• OSMO: The required battery charge was reduced to 5%.
• OSMO: Assistance for shooting the nadir.
• OSMO: If the OSMO is not correctly mounted on a tripod and the camera cannot be tilted enough, shooting is not aborted if the gimbals position differs less than 5° from the target position.
• Performance optimizations when rotating the drone.
• No rotation any more before shooting the nadir image.
• Additional information in the log file, which can be accessed using iTunes.
• Camera settings changed by the app will be restored after shooting. These include aspect ratio, ISO, exposure time und EV.
• After the panorama has been completed, the pilot regains control of the drone more quickly.
• Ability to turn off video output to save energy.
• Simplification of the process of registration and activation of the app.
• DJI SDK 4.5, resolves crashes on 32 bit devices.
1.4
2017-11-02
• In AEB mode EV values other than 0.7 can be used.
• In manual exposure mode, an EV value can be set by which exposure is increased per row of the panorama.
• In manual exposure mode EV can be reduced for pictures that are heading towards the sun (not OSMO).
• Tapping on the compass symbol in the upper info bar switches between the display of the direction relative to north or relative to the sun.
• Enhancements for models with adjustable aperture.
• The maximum allowed distance from iOS device to the home point has been increased to 100 meters. This still does not mean you can only fly 100 meters away. Just the home point of the aircraft has to be in a 100 meter range from the pilot.
• Tap to focus did not work with the P4P.
• Tap to focus now with acoustic feedback.
• New autofocus handling: If autofocus is turned off in the DJI GO app, RCPano won't focus. You can focus with autofocus turned on by tapping on the screen. In the program settings an option is added to turn focussing for every image on or off.
• Acoustic feedback can be turned off. If acoustic feedback is turned off or the mute switch is turned on, optical feedback is provided.
• Shooting is cancelled if an error in the IMU is encountered.
• Fixed possible display problems in iOS 11
• For better analysis of errors a log file is written which can be accessed using iTunes.
• DJI SDK 4.3.2, only works with the latest firmware releases.
As always, you will find an overview of the new features on our website. If you like RCPano, we would be very happy if you could leave a positive review of the app. It really helps us!
• In manual exposure mode, an EV value can be set by which exposure is increased per row of the panorama.
• In manual exposure mode EV can be reduced for pictures that are heading towards the sun (not OSMO).
• Tapping on the compass symbol in the upper info bar switches between the display of the direction relative to north or relative to the sun.
• Enhancements for models with adjustable aperture.
• The maximum allowed distance from iOS device to the home point has been increased to 100 meters. This still does not mean you can only fly 100 meters away. Just the home point of the aircraft has to be in a 100 meter range from the pilot.
• Tap to focus did not work with the P4P.
• Tap to focus now with acoustic feedback.
• New autofocus handling: If autofocus is turned off in the DJI GO app, RCPano won't focus. You can focus with autofocus turned on by tapping on the screen. In the program settings an option is added to turn focussing for every image on or off.
• Acoustic feedback can be turned off. If acoustic feedback is turned off or the mute switch is turned on, optical feedback is provided.
• Shooting is cancelled if an error in the IMU is encountered.
• Fixed possible display problems in iOS 11
• For better analysis of errors a log file is written which can be accessed using iTunes.
• DJI SDK 4.3.2, only works with the latest firmware releases.
As always, you will find an overview of the new features on our website. If you like RCPano, we would be very happy if you could leave a positive review of the app. It really helps us!
1.3
2017-09-12
• Support for the Spark
• Support for the Phantom 4 Advanced and Phantom 4 Pro
• Switch to the new process of activating an app with DJI
• In the main window display of activation status of the app
• Switch to the new method of detection of no fly zones
• Devices without GPS get a warning to carefully check the homepoint instead on rejecting the shooting
• Possibility to shoot a one row panorama
• The OSMO starts and ends the panorama at the current gimbal position, not at 0 degrees
• Sadly no possibility any more to use EV values other than ±0.7 with AEB shots
• A warning is shown when the IMU must be calibrated
• If an error or timeout occurs during writing to the SD card the last shot is repeated
• Enhanced the algorithm to calculate the number of pictures in optimization mode
• DJI SDK 4.2.2
• Only works with the newest firmware versions!
• Support for the Phantom 4 Advanced and Phantom 4 Pro
• Switch to the new process of activating an app with DJI
• In the main window display of activation status of the app
• Switch to the new method of detection of no fly zones
• Devices without GPS get a warning to carefully check the homepoint instead on rejecting the shooting
• Possibility to shoot a one row panorama
• The OSMO starts and ends the panorama at the current gimbal position, not at 0 degrees
• Sadly no possibility any more to use EV values other than ±0.7 with AEB shots
• A warning is shown when the IMU must be calibrated
• If an error or timeout occurs during writing to the SD card the last shot is repeated
• Enhanced the algorithm to calculate the number of pictures in optimization mode
• DJI SDK 4.2.2
• Only works with the newest firmware versions!
1.2
2017-03-28
• Support for the Mavic Pro
• GEO: Warning zones were sometimes interpreted as No-Fly zones
• Enhanced positioning with the Phantom 4
• Preserve a bigger overlapping region when optimizing picture count
• DJI SDK 3.5
• GEO: Warning zones were sometimes interpreted as No-Fly zones
• Enhanced positioning with the Phantom 4
• Preserve a bigger overlapping region when optimizing picture count
• DJI SDK 3.5
1.1
2016-11-11
• Support for the Phantom 4
• Support for the OSMO Standard
• Easy changing of exposure parameters during the shot: Tap on the statusbar on the lower part of the screen
• Implementation NoFLy Status / GEO System
• Enhanced error messages
• When entering the settings screen, the gimbal is moved to the requested start position, if possible. When leaving the settings screen, the original position is restored
• DJI SDK 3.4
• iOS 10
• Support for the OSMO Standard
• Easy changing of exposure parameters during the shot: Tap on the statusbar on the lower part of the screen
• Implementation NoFLy Status / GEO System
• Enhanced error messages
• When entering the settings screen, the gimbal is moved to the requested start position, if possible. When leaving the settings screen, the original position is restored
• DJI SDK 3.4
• iOS 10
1.0.1
2016-07-21
Fixed an issue with long time exposures.
1.0
2016-07-05
Ways to hack RCPano
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download RCPano MOD APK
Request a Hack
Ratings
2 out of 5
2 Ratings
Reviews
mel in az,
Connecting confusing at first but works fine
Isn’t clear when you are registered but after a quick response from developer I’m up and running. It really gives the user a lot more options than the stock DJI app provides.
kn77356,
Unstable and caused my drone to crash
First use, had the drone at 400 feet and attempted to take a panoramic photo. Without warning, drone started tumbling from the sky. It appears that somethings shut down one or more of the prop motors. This was a DJI Mavic pro, less than a month old. I am an experienced drone pilot with over 100 hours flight time.
I do not recommend this app to anyone! Extensive damage to my drone. Not a happy camper.
I do not recommend this app to anyone! Extensive damage to my drone. Not a happy camper.
