AsteraApp Hack 12.08 + Redeem Codes
Developer: Astera LED Technology GmbH
Category: Entertainment
Price: Free
Version: 12.08
ID: com.asteraled.app
Screenshots
Description
The AsteraApp™ offers intuitive and fast control of complex lighting setups with fully customizable programs and effects. The App is also used to prepare Astera lights for wireless DMX by sending addresses and profilesto them. In addition, lamps can be diagnosed, updated or reset from the AsteraApp™.
Here are some of the features:
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Targets
Quickly create groups of lights, assign positions and select which lights should receive commands.
Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Emergency Lights
Switches to white light when AC power is cut to keep your event save
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraApp™ is packed with many additional items and new features are frequently added via software update.
Here are some of the features:
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Targets
Quickly create groups of lights, assign positions and select which lights should receive commands.
Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Emergency Lights
Switches to white light when AC power is cut to keep your event save
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraApp™ is packed with many additional items and new features are frequently added via software update.
Version history
12.08
2023-04-03
Fixed: Arrangement ot target tiles.
Fixed: Brightness sliders responding behaviour.
Fixed: Brightness sliders responding behaviour.
12.07
2023-03-28
Fixed: Whole lines could be highlighted in the Connected Lights list.
Fixed: After changing the radio PIN, incorrect lamps could temporarily be displayed in the Connected Lights List.
Fixed: In the background update page, updates to versions that already have all connected lamps of a type can no longer be selected.
Modified: french support partner in About Page.
Added: Duplicate Radio PIN detection and treatment (requires fw v5.12.67 or higher for BTB).
Added: Magic Wand->Sequential Addressing: overflow check.
Added: CRMX Link by key option (requires fw v5.12.90 or higher).
Added: Connected lights can now be automatically reconfigured to the new PIN when the radio PIN is changed (requires fw v5.12.67 or higher).
Fixed: DMX-Configurator: overflow calculation intervened one address too early.
Added: 90 degree feature for layered effects (only has effect in HYDRAs with v5.12.96 or higher).
Modified: The color of the Label of a BT Bridge has changed from black to white.
Modified: Legacy Bluetooth mode has been removed in Background Update Page..
Added: Progress display in Firmwares download.
Added: Faster connected lights list (requires fw v5.12.88 or higher for BTB).
Added: Progress display in the magic wand.
Fixed: If a long Fixture Number (set via app) was edited on the lamp, it could be displayed incorrectly on the app.
Added: fully Support for the CRMX Module of the ART7.
Fixed: Standby times could be displayed one hour too early after they were read out from a newly connected ART7.
Added: Disable random flashing switch to DMX Configurator.
Added: Support for HyperionBTB.
Fixed: After changing the radio PIN, incorrect lamps could temporarily be displayed in the Connected Lights List.
Fixed: In the background update page, updates to versions that already have all connected lamps of a type can no longer be selected.
Modified: french support partner in About Page.
Added: Duplicate Radio PIN detection and treatment (requires fw v5.12.67 or higher for BTB).
Added: Magic Wand->Sequential Addressing: overflow check.
Added: CRMX Link by key option (requires fw v5.12.90 or higher).
Added: Connected lights can now be automatically reconfigured to the new PIN when the radio PIN is changed (requires fw v5.12.67 or higher).
Fixed: DMX-Configurator: overflow calculation intervened one address too early.
Added: 90 degree feature for layered effects (only has effect in HYDRAs with v5.12.96 or higher).
Modified: The color of the Label of a BT Bridge has changed from black to white.
Modified: Legacy Bluetooth mode has been removed in Background Update Page..
Added: Progress display in Firmwares download.
Added: Faster connected lights list (requires fw v5.12.88 or higher for BTB).
Added: Progress display in the magic wand.
Fixed: If a long Fixture Number (set via app) was edited on the lamp, it could be displayed incorrectly on the app.
Added: fully Support for the CRMX Module of the ART7.
Fixed: Standby times could be displayed one hour too early after they were read out from a newly connected ART7.
Added: Disable random flashing switch to DMX Configurator.
Added: Support for HyperionBTB.
11.58
2022-04-28
Added: Fast update of Bluetooth Bridges.
11.57
2022-02-07
Modified: DMX Configurator: "Profile by #" cannot be changed while sending is active.
Fixed: DMX Configurator: Fixture Number now increments by 1 (and not by current DMX footprint).
Fixed: DMX Configurator: After editing Fixture Number while Sending is active, the new one is sent out.
Fixed: DMX Configurator: Fixture Number now increments by 1 (and not by current DMX footprint).
Fixed: DMX Configurator: After editing Fixture Number while Sending is active, the new one is sent out.
11.56
2022-02-02
Modified: Any string can now be entered as the fixture number in the light's details.
Modified: Lower limit for entering fixture numbers is 1 now.
Fixed: Master PINs can be entered with 8 digits anywhere in the app.
Fixed: The entry of the strobe mode was possibly hidden in the DMX configurator for tubes.
Modified: Lower limit for entering fixture numbers is 1 now.
Fixed: Master PINs can be entered with 8 digits anywhere in the app.
Fixed: The entry of the strobe mode was possibly hidden in the DMX configurator for tubes.
11.55
2021-12-17
Fixed: Bluetooth connection does not work sometimes.
Added: Lights onboarding.
Added: Lights onboarding.
11.54
2021-11-28
Downgrade to version 11.50 (only version number is changed to 11.54)
11.53
2021-11-25
Fixed: Bluetooth connection does not work sometimes
11.52
2021-11-24
Fixed: Bluetooth connection does not work sometimes.
11.51
2021-11-19
Added: Management of multiple Bluetooth Bridges at same time
Modified: temporary light names feature
Added: Assignment of temporary lamp names in the DMX configurator
Fixed: turn by 180 feature removed for spots
Modified: temporary light names feature
Added: Assignment of temporary lamp names in the DMX configurator
Fixed: turn by 180 feature removed for spots
11.50
2021-09-21
Added: support for turn by 180 feature (requires firmware V5.10.22)
.
Added: support for temporary light names (requires firmware V5.10.22).
Added: Macro rename of light.
Added: downloading lights log files (requires firmware V5.11.0).
.
Added: support for temporary light names (requires firmware V5.10.22).
Added: Macro rename of light.
Added: downloading lights log files (requires firmware V5.11.0).
11.49
2021-09-01
Fixed: app crashed after connecting to AsteraBox or NYX Bulb
11.48
2021-08-25
Fixed: app does not save last connected AsteraBox
11.47
2021-08-25
- Fixed: Backups that were created with an app version V11.44 or earlier could not be loaded with V11.45 and V11.46.
- Fixed: lights details/magic wand: Values selected from the pickers were not always adopted.
- Fixed: lights details/magic wand: Values selected from the pickers were not always adopted.
11.46
2021-07-25
Fixed: In the DMX Configurator the DMX Address jumped to a different value after the end of the transmission process.
11.45
2021-07-12
Added: Names for Launcher Pages
Fixed: tapping Tap Sync Tile did release a latched Flash Tile
Fixed: tapping Tap Sync Tile did release a latched Flash Tile
11.44
2021-06-16
Added: support for new PB15
11.43
2021-06-11
Added: Display of the RGB values after tapping between "Black" button and the color wheel.
11.42
2021-05-18
Added: bluetooth support for NYX bulb.
Added: Small tiles mode for program launcher.
Added: Small tiles mode for program launcher.
11.41
2021-05-07
Added: When starting an "Update to latest", the app offers to exclude lamps with higher version.
Added: Confirmation window before starting a possible downgrade to a lower firmware version.
Fixed: rosco E703 was not Cold Lavender.
Added: "DMX Values for common Colors V3" with more Whites and Hue/Sat values for all gels.
Added: Confirmation window before starting a possible downgrade to a lower firmware version.
Fixed: rosco E703 was not Cold Lavender.
Added: "DMX Values for common Colors V3" with more Whites and Hue/Sat values for all gels.
11.40
2021-04-06
Fixed: app crashes sometimes when establishing a bluetooth connection.
11.39
2021-03-12
Changed: App does not try to update nyx that are connected via bluetooth.
11.38
2021-02-07
Added: Connection to the Internet is no longer required to start controlling Nyx Bulbs without an AsteraBox.
Fixed: When restoring a Backup, the arrangement on the target's page was lost and all tiles were bunched together.
Fixed: English version of Standby Time editor could not handle values in range 12:00 AM to 12:59 AM.
Fixed: When the app is connected to a NYX Bulb via Bluetooth, "Disable AUTO BPM" was not forcibly On.
Fixed: "AC Fail" modes were selectable for NYx Bulbs in light's details.
Changed: In the Magic Wand, the "Unpair CRMX" is already there when one of the selected lamps is paired.
Changed: In the Magic Wand, the power on button is only there when all the selected lamps are "POWERED OFF".
Fixed: When restoring a Backup, the arrangement on the target's page was lost and all tiles were bunched together.
Fixed: English version of Standby Time editor could not handle values in range 12:00 AM to 12:59 AM.
Fixed: When the app is connected to a NYX Bulb via Bluetooth, "Disable AUTO BPM" was not forcibly On.
Fixed: "AC Fail" modes were selectable for NYx Bulbs in light's details.
Changed: In the Magic Wand, the "Unpair CRMX" is already there when one of the selected lamps is paired.
Changed: In the Magic Wand, the power on button is only there when all the selected lamps are "POWERED OFF".
11.37
2020-12-18
- fixed: If an effect was opened in the Targets tab, the commands could be sent to the wrong lamps.
- fixed: minor issue with Enter / Leave Standby time editor.
- fixed: minor issue with Enter / Leave Standby time editor.
11.35
2020-11-20
Fixed: app crashed on tapping RF Region
.
Improved: pairing lights is more stable.
.
Improved: pairing lights is more stable.
Ways to hack AsteraApp
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download AsteraApp MOD APK
Request a Hack
Ratings
2.7 out of 5
32 Ratings
Reviews
gamer_96,
Oof. No.
App is quite buggy.
JoeJerkins,
Nope
This app is horrendous. I’m currently sitting on the concrete on the ground floor of a parking garage on a holiday weekend trying to update all of these Titan tubes and the app just won’t cooperate. I’ve been in the lighting world for 20 years and I’ve never met a more frustrating system. I have 72 titans running. 48 were running fine all day then all of a sudden the Art7 transmitter decided to update in the middle of the day. After the update, 43 of my tubes are not showing up in the app now. They are rigged in housings that are mounting the concrete ceiling. They can only be reached with a lift. All of the other technicians have gone home and here I am dealing with this garbage software. Fix what is broken before you add more junk. You’re wasting my weekend. Thanks for nothing.
MasterKey06,
Works Great
Takes a little time and practice to understand how everything works. Once you have some experience under your belt the possibilities are endless. The app is definitely easier than controlling them over dmx. It gets better and better with every update!
Who carezzzzzzzzzzzzz,
Constant Bluetooth notifications
Why does this app constantly notify me to turn on Bluetooth to connect to devices? Like every couple minutes when my screen is on and the app is not even running. Very annoying. Not all of us want our Bluetooth on constantly. Will uninstall because of this annoyance.
Peter the Gaffer,
Love V11
Very useful new features in V11. Layer effects offer so many possibilities.
nikhitz,
Frustrating App
Not intuitive at all or user friendly would not be happy if these end up on set and had to figure them out there.
Gene Sung,
Poor pairing protocol
The pairing process is too convoluted and quite often the lights become un-paired for no logical reason. Good functionality and features, but poor pairing resulting in too much wasting of valuable set time.
Ajdevo97,
Great fixtures….Craptastic app
The app is garbage and none of my bridges will bond….
the Bumpkin from Beyond,
So close . . .
The app makes complex programming easily accessible and fast. There are still glitches when instruments belong to multiple targets and the user switches quickly between them - changes are frequently applied to the wrong target possibly due to extremely laggy performance on some Android devices. Overall extremely useful and though It’s not necessarily intuitive, the learning curve isn’t very steep. If you’re mobile or run-n-gun, it’s definitely the way to go for deep control over Astera fixtures.
Sparkylocal52,
Not Pleased 😖
From the perspective of a Board Operator these fixtures are useful however the app isn’t. Other than an initial update to the art7/fixtures and pair to box and crmx link start a show the dates android tablet and app are long forgotten about until tube run into problems. Personally I try only use them through a console. Don’t get me started on the power boxes though🤦🏿♂️ can we get a display screen please?
