AsteraNext Hack 12.15 + Redeem Codes
Developer: Astera LED Technology GmbH
Category: Entertainment
Price: Free
Version: 12.15
ID: com.asteraled.next
Screenshots
Description
The AsteraNext offers intuitive and fast control of complex lighting setups of current and upcoming Astera products. It provides fully customizable programs and effects and also it is designed to work seamlessly with other control methods. It can set up DMX addresses and footprints for CRMX control. In addition, lamps can be diagnosed, updated or reset from the AsteraNext.
Here are some of the features:
Layer Effects
It is now easier than ever to control pixels of your Astera lights and create complex effects.
CRMX Support
That would make it much easier for customers to understand how the DMX works, also easier to operate the CRMX module.
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Targets
Quickly create groups of lights, assign positions and select which lights should receive commands.
Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Emergency Lights
Switches to white light when AC power is cut to keep your event save
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraNext is packed with many additional items and new features are frequently added via software update.
Here are some of the features:
Layer Effects
It is now easier than ever to control pixels of your Astera lights and create complex effects.
CRMX Support
That would make it much easier for customers to understand how the DMX works, also easier to operate the CRMX module.
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Targets
Quickly create groups of lights, assign positions and select which lights should receive commands.
Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Emergency Lights
Switches to white light when AC power is cut to keep your event save
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraNext is packed with many additional items and new features are frequently added via software update.
Version history
12.15
2023-06-09
Support for Leo and Pluto.
12.11
2023-04-05
- Fixed: HYDRA lights firmware detection on download
12.10
2023-04-01
- Fixed: Various minor bugs
- Improved: Stability of the application
- Improved: Stability of the application
12.09
2023-03-30
- Fixed: DMX Configurator (german version only) wrong text in case disabled random flashing.
- Improved: Magic Wand: Auto-Adressing: If the firmware of a light is too old to set its fixture number, it will be displayed in red in the preview.
- Added: Third Button on "Add Bluetooth Bridge" page: "Add by WIFI Access Point"
- Fixed: App did not display all error messages from the BTB during background update.
- Improved: Establishment and Stability of the WIFI connection
- Improved: Magic Wand: Auto-Adressing: If the firmware of a light is too old to set its fixture number, it will be displayed in red in the preview.
- Added: Third Button on "Add Bluetooth Bridge" page: "Add by WIFI Access Point"
- Fixed: App did not display all error messages from the BTB during background update.
- Improved: Establishment and Stability of the WIFI connection
12.08
2023-03-06
We now offer support for the new AsteraBoxes called "ART7-WIFI". You can connect to them using an existing WLAN, and it is also possible to configure them to create an access point. The app can dynamically search for these access points using Art-Net, which is a UDP/IP protocol.
12.07
2023-02-20
Fixed: The Link by key feature in DMX Configurator did not work.
Fixed: The Auto Update switch was OFF after reinstallation.
Fixed: Updates of a lamp acting as a BT bridge to the already installed version were not prevented.
Fixed: The Auto Update switch was OFF after reinstallation.
Fixed: Updates of a lamp acting as a BT bridge to the already installed version were not prevented.
12.06
2023-02-08
Fixed: some popups did not scroll if large font was set in device settings.
Fixed: after changing the radio PIN, incorrect lamps could temporarily be displayed in the connected lights list.
Fixed: in the background update page, updates to versions that already have all connected lamps of a type can no longer be selected.
Fixed: after changing the radio PIN, incorrect lamps could temporarily be displayed in the connected lights list.
Fixed: in the background update page, updates to versions that already have all connected lamps of a type can no longer be selected.
12.05
2023-02-02
Fixed: App crashes sometimes after activating targets tab
12.04
2023-01-02
Fixed: app unable to connect to previously paired bridge.
Some UI improvements.
Some UI improvements.
12.03
2022-12-27
App crashes on opening lights manuals.
Better app stability.
Better app stability.
12.01
2022-10-28
Fixed: App crashes on selecting lights for set.
12.00
2022-10-05
Added: Duplicate Radio PIN detection and treatment (requires fw v5.12.67 or higher for BTB).
Added: CRMX Link by key option (requires fw v5.12.90 or higher).
Added: Connected lights can now be automatically reconfigured to the new PIN when the radio PIN is changed (requires fw v5.12.67 or higher).
Added: 90 degree feature for layered effects (only has effect in HYDRAs with v5.12.96 or higher).
Added: The color of the Label of a BT Bridge has changed from black to white.
Added: Progress display in Firmwares download.
Added: Faster connected lights list (requires fw v5.12.88 or higher for BTB).
Added: Progress display in the magic wand.
Added: If a long Fixture Number (set via app) was edited on the lamp, it could be displayed incorrectly on the app.
Added: Support for the CRMX Module of the ART7.
Fixed: Standby times could be displayed one hour too early after they were read out from a newly connected ART7.
Added: Disable random flashing switch to DMX Configurator.
Added: Support for HyperionBTB.
Added: CRMX Link by key option (requires fw v5.12.90 or higher).
Added: Connected lights can now be automatically reconfigured to the new PIN when the radio PIN is changed (requires fw v5.12.67 or higher).
Added: 90 degree feature for layered effects (only has effect in HYDRAs with v5.12.96 or higher).
Added: The color of the Label of a BT Bridge has changed from black to white.
Added: Progress display in Firmwares download.
Added: Faster connected lights list (requires fw v5.12.88 or higher for BTB).
Added: Progress display in the magic wand.
Added: If a long Fixture Number (set via app) was edited on the lamp, it could be displayed incorrectly on the app.
Added: Support for the CRMX Module of the ART7.
Fixed: Standby times could be displayed one hour too early after they were read out from a newly connected ART7.
Added: Disable random flashing switch to DMX Configurator.
Added: Support for HyperionBTB.
1.53
2022-07-15
Fixed: channel selection in CRMX coexistence.
Added: resume lights firmware update after connection lost.
Added: resume lights firmware update after connection lost.
1.52
2022-07-12
Added: Updated firmwares for TITAN BTB and HELIOS BTB tubes
1.51
2022-07-07
Added new firmwares.
Fixed CRMX issues.
Fixed CRMX issues.
1.5
2022-07-01
Added new lights firmwares.
1.1
2022-06-09
Fixed: app crashes on CRMX coexistence view
Fixed: better CRMX power override handling
Fixed: better CRMX power override handling
1.0
2022-06-08
Ways to hack AsteraNext
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download AsteraNext MOD APK
Request a Hack
Ratings
3 out of 5
2 Ratings
Reviews
nicklutsch,
New app doesn’t work most of the time
“Can’t connect to X amount of lights.”
Light shows “disconnected” but will highlight or function when call upon.
Doesn’t pair most of the lights when in blue mode.
This new version of the app doesn’t work on multiple devices (iOS or Android) and on different fixtures and Asteraboxes. We spent far too long getting these connected at a show.
Light shows “disconnected” but will highlight or function when call upon.
Doesn’t pair most of the lights when in blue mode.
This new version of the app doesn’t work on multiple devices (iOS or Android) and on different fixtures and Asteraboxes. We spent far too long getting these connected at a show.
