Booth.Events - pro photo booth Hack 1.21.0 + Redeem Codes

- NEW: support for Danish, Dutch, French, German, Indonesian, Norwegian, Portuguese (Brazil), Spanish, and Swedish languages. Want your language added, or found a mistake? Please use the Languages page to tell us

- NEW: support for USB camera videos, slowmos & boomerangs in portrait orientation (not all cameras are supported)

- NEW: if you've set the app to take slowmos & boomerangs with your USB camera & your camera supports switching to high framerate video while tethered, you'll see a big increase in the quality of slowmos & boomerangs. This is currently limited to Canon EOS cameras and the Canon M50 mk II, when the camera is set to English language; we hope to support more cameras in the future

- IMPROVED: the Languages page is now accessible from iPhone as well as iPad, and only shows you text to customize that your guests will see

- FIXED: an issue that could cause a change you made on the Languages page to not be saved

- FIXED: a rare issue that could cause the app to get stuck showing a spinner on the guest's template selection card

- FIXED: an issue that could cause taking photos with a USB camera to fail if you canceled a video then asked to take photos

- [1.20.1] FIXED: An issue that could cause USB cameras, especially Sony models, not to download photos
- NEW: SceneSelect now works for every camera (including USB cameras). Requires iOS 15 or newer.
- FIXED: an issue that could cause a USB camera's live-view to get stuck on low quality
- FIXED: when a USB camera was in portrait orientation, the template previews were incorrectly rotated
- FIXED: an issue that could cause very large photos from a USB camera in portrait orientation to have a black bar on the side of the photo

- NEW: SceneSelect now works for every camera (including USB cameras). Requires iOS 15 or newer.
- FIXED: an issue that could cause a USB camera's live-view to get stuck on low quality
- FIXED: when a USB camera was in portrait orientation, the template previews were incorrectly rotated
- FIXED: an issue that could cause very large photos from a USB camera in portrait orientation to have a black bar on the side of the photo

- FIXED: auto-print would fail if you turned off all other sharing actions

- FIXED: an issue that could cause the app to get stuck when recording a video with sound

- FIXED: some iPads in portrait orientation did not show the Send button when sending a text

- IMPROVED: tweaks to the guest experience including making the "Done" button easier to find
- IMPROVED: the "Reshoot" experience is better for slow-mos/boomerangs/videos
- FIXED: the timer showing how much time is left during video+sound recording was not showing in some cases

- FIXED: an issue that could cause the event to show no assigned templates
- FIXED: choosing templates from the app could cause templates to be erroneously unselected
- IMPROVED: when you mistype your exit event password you don't have to re-summon the menu, it'll stay up

- IMPROVED: if you spend a lot of time in Preview mode we'll make it more obvious that you're in Preview mode, in case you didn't realize
- FIXED: changing between photos / slow-mo was very slow on iOS 12
- FIXED: template previews could flicker when a USB camera was connected

- IMPROVED: we simplified how printers are set up. If you already had a printer added before this update you will need to add it again, unless you want the popup to show each time (in which case you don't need to do anything)
- FIXED: an issue that caused a printer to be removed because it was busy printing when its connectivity was checked
- FIXED: a rare crash that could occur when recording video or switching cameras
- FIXED: an rare issue that could cause the wrong number of photos/videos or guests to show on the home screen

- NEW: GIF capture mode. You can control how many frames are taken and the playback delay between each. By default GIF will be enabled for new events that you create, and not enabled for existing events.
- IMPROVED: you can now use connected USB cameras for slow-mos and boomerangs so that the device camera is not needed for any capture type. This is off by default, opt-in under Advanced Capture Settings and check that your USB camera's framerate is high enough for slow-mos to look good.
- IMPROVED: instead of downloading all events immediately, the app will only sync downloads for the last 5 events you've opened or launched. This makes startup faster & conserves your bandwidth, and allowed us to get rid of the "download past events" setting.
- [1.19.1] Several small fixes & improved the template selection card's update speed

- NEW: GIF capture mode. You can control how many frames are taken and the playback delay between each. By default GIF will be enabled for new events that you create, and not enabled for existing events.
- IMPROVED: you can now use connected USB cameras for slow-mos and boomerangs so that the device camera is not needed for any capture type. This is off by default, opt-in under Advanced Capture Settings and check that your USB camera's framerate is high enough for slow-mos to look good.
- IMPROVED: instead of downloading all events immediately, the app will only sync downloads for the last 5 events you've opened or launched. This makes startup faster & conserves your bandwidth, and allowed us to get rid of the "download past events" setting.
- FIXED: issues with the portrait video effect that could cause it not to work
- FIXED: the app could upload an MP4 when taking photos in preview mode
- FIXED: the app could get stuck in Share Station Camera mode when trying to use preview afterward

- NEW: the consent screen was moved earlier in the flow, and new consent options are now possible: optional consent, mandatory consent with guest email address, and mandatory consent with password. You can configure these on your event on the website.
- NEW: when you take more than one photo and hit "Reshoot", you can choose which photo you want to reshoot
- NEW: Mobibooth LED support
- CHANGED: the "AirPrint: manual printing" setting is now per-device instead of per-event, and now defaults to on (manual printing by default)
- IMPROVED: the live-view guides are shown on the home screen if your event has only 1 capture type and only 1 template
- IMPROVED: when you connect a Canon printer, we'll ask you if you want to automatically set Selphy printer insets
- IMPROVED: you can cancel taking photos during the countdown of any photo (not just the first one)
- FIXED: a rare crash that could happen if the first photo in a series failed to be taken by the device camera
- FIXED: the guest idle timer was not working on the home screen if the countdown was not started

1.17.1:
- NEW: if you have uploads pending and you leave the app, we'll alert you that your pending uploads will only process while the app is open
- CHANGED: we heard your feedback about how the last update made it harder for your guests to see your customizations in some cases, such as when you only have 1 capture type enabled. We've changed the flow to address this: the home screen is now always shown with the capture button, and if there's only 1 capture type and 1 template we'll skip the shutter button screen & go straight to countdown.
- IMPROVED: it's now much faster to get the QR code, and you can see the upload progress while you're waiting
- FIXED: template live previews used the wrong order of the template's photo areas
- FIXED: a crash when attract screen was shown in certain cases
- FIXED: issues that could cause your attract screen not to show
- FIXED: if you turned on live-view aspect fit and used an older USB camera, the live-view was too small

1.17.0:
- IMPROVED: by moving the template selection up front, guests only have to take the number of photos they need & the live-view can show aspect-ratio guides to help guests to understand where to stand
- IMPROVED: guests can now choose the template for slow-mos, videos, and boomerangs (instead of the app choosing the first available 1-photo template)
- IMPROVED: template can now be selected when app is in Share Station camera mode
- IMPROVED: new LED states for app goes to background & comes to foreground
- CHANGED: instead of "get ready timer" and "countdown timer", there's now "countdown timer" and a timer that controls the delay between photo taken and the next countdown. Please check your existing event's settings: use the Preview function to make sure your countdown works how you want.
- CHANGED: added a new LED state for the moment right before + after a photo is taken
- FIXED: an issue that could cause past events not to be downloaded even when they were set to be downloaded
- FIXED: when using an attract screen as the background on the homescreen, if the attract screen doesn't have liveview it will now show correctly
- FIXED: several issues that slowed down launching an event
- FIXED: an issue on devices without Face ID that caused a delay when switching from slow-mo to photo mode or vice-versa
- FIXED: if you changed the text for "Get Ready!" it was cut off if you entered long text

In this update we did a lot of work on the photo/video-taking experience of the app.

- IMPROVED: by moving the template selection up front, guests only have to take the number of photos they need & the live-view can show aspect-ratio guides to help guests to understand where to stand
- IMPROVED: guests can now choose the template for slow-mos, videos, and boomerangs (instead of the app choosing the first available 1-photo template)
- IMPROVED: template can now be selected when app is in Share Station camera mode
- IMPROVED: new LED states for app goes to background & comes to foreground
- CHANGED: instead of "get ready timer" and "countdown timer", there's now "countdown timer" and a timer that controls the delay between photo taken and the next countdown. Please check your existing event's settings: use the Preview function to make sure your countdown works how you want.
- CHANGED: added a new LED state for the moment right before + after a photo is taken
- FIXED: an issue that could cause past events not to be downloaded even when they were set to be downloaded
- FIXED: when using an attract screen as the background on the homescreen, if the attract screen doesn't have liveview it will now show correctly
- FIXED: several issues that slowed down launching an event
- FIXED: an issue on devices without Face ID that caused a delay when switching from slow-mo to photo mode or vice-versa
- FIXED: if you changed the text for "Get Ready!" it was cut off if you entered long text

- FIXED: a rare but pesky crash when the app had been in the background for a while right after you made a slow-mo/video
- FIXED: device names showing as "iPad" instead of "Tim's iPad" when using iOS 16
- NEW: support for LEDs connected via Bluetooth; initial support is limited to the SP110E Led Hue controller

- NEW: added the pending upload count to in-event menu and when you start the app directly into an event
- IMPROVED: the look of customized after-capture screen background images
- CHANGED: default attract screen delay is now 2 minutes instead of 20 seconds
- FIXED: if you forced scene selection on with only 1 scene, the preview screen in some cases could be a hot mess
- FIXED: for very short countdowns the "Get Ready" text could flicker on the screen
- FIXED: an issue that could cause live view to not start again after it'd been stopped on some Canon cameras

- FIXED: Slow-mo thumbnails appear the wrong size on Shared.Gallery
- FIXED: a rare crash on slow-mo creation

- FIXED: an issue that caused Canon/Nikon cameras with dual card slots saving the same photos on each to get stuck during photo capture
- FIXED: an issue that could occur when signing out of an account and signing into a different account
- IMPROVED: when the app starts directly into an event, make it easier to exit the event and catch the case where some of the event's assets haven't been downloaded yet
- FIXED: an issue on iPhone introduced by the last update

- FIXED: an issue that caused Canon/Nikon cameras with dual card slots saving the same photos on each to get stuck during photo capture
- FIXED: an issue that could occur when signing out of an account and signing into a different account
- IMPROVED: when the app starts directly into an event, make it easier to exit the event and catch the case where some of the event's assets haven't been downloaded yet

- FIXED: in-app signup flow

- IMPROVED: tweaks to the sharing screen so guests don't hit "I'm Done" before they get a chance to enter their details
- IMPROVED: the event name is shown after launch so you can make sure you launched the right one
- IMPROVED: added an advanced setting to turn off the screen flash on shutter release when using a USB camera, for the case where your camera has significant shutter delay
- IMPROVED: entering a phone number is more likely to show the correct country flag

Please note that if you've changed the Language settings you should review these after updating, as some text has changed.

- NEW: need to share or print something from before? We've added this functionality to the in-event menu (hold two fingers down to open the menu). Requires internet access.
- IMPROVED: we tweaked the countdown screen to make it clearer to guests what's happening
- FIXED: a rare issue that could cause a template to not get used
- FIXED: capture button customizations were not working
- FIXED: when the app continues an event on startup, USB cameras were not being detected (you had to exit the event to connect it)

- NEW: record videos with sound using iOS camera or supported USB-connected cameras, use portrait mode video effect (supported iOS 15 devices using iOS camera only)
- IMPROVED: better video stabilization for slow-mos
- IMPROVED: reduced thermal load & lower battery usage by lowering the iOS camera's framerate after a few minutes of inactivity
- (1.14.1) IMPROVED: see what event the device has launched from the website account page

- NEW: record videos with sound using iOS camera or supported USB-connected cameras, use portrait mode video effect (supported iOS 15 devices using iOS camera only)
- IMPROVED: better video stabilization for slow-mos
- IMPROVED: reduced thermal load & lower battery usage by lowering the iOS camera's framerate after a few minutes of inactivity