FieldScaper Hack 2.2 + Redeem Codes
Sound warp field recorder
Developer: Igor Vasiliev
Category: Music
Price: $9.99 (Download for free)
Version: 2.2
ID: com.fieldscaper
Screenshots
Description
Advanced field recorder combined with a sound warp engine and a collection of ready to use dynamic presets for iPad and iPhone. Discover new ways to create and construct unusual and exciting sounds from any environmental audio recordings or samples recorded from other apps through Inter-App audio or Audiobus.
The main advantage is that you can record and modify samples along the way within the single app. You can record sounds and noises, delete unwanted parts and then use presets to give a whole new sounding or create spectacular soundscapes and textures to use them as loops in this app. And even use FieldScaper as effect in real time with other apps or external input.
The FieldScaper consists of two main parts. The first part is the field recorder with special options for different ways of record environmental sound from microphone or record other sound sources. With the sample editor you can cut or split the source sample for more convenient use. The second part is the scaper sound engine that with using dynamic presets can easily transform the most ordinary sounds into something absolutely different. These parts connect with each other into one whole but you can use recorder or scaper independently.
The FieldScaper supports complete MIDI control for all faders, knobs and many buttons. You can change the parameters of oscillators, filters, delays and mixer by using any external MIDI controller or MIDI apps like sequencers. With the MIDI controllers this app becomes very comfortable to use at live performance.
Field recorder:
- Auto start record when input signal appears.
- Auto stop record when signal below threshold or by time.
- Record series of samples by a signal presence.
- Recorder timer in seconds or measure (sync with BPM).
- Input signal monitor with different modes.
- Automatic gain control, cut off input filters and noise gate.
- Advanced sample editor (delete, trim, split, cut, copy, paste, undo).
- Filter and normalizer for recorded sample.
Scaper sound engine:
- Loop based mode for processing input in real time as effect.
- Three sample-based oscillators, each with set of effects.
- Low-pass, high-pass, band-pass, band-stop filters with resonance.
- Two range delay with smooth time change and additional modes.
- Advanced spatial mixer / reverb with changing of side and distance.
- Three-band parametric equalizer for each oscillator.
- Wide range changing of oscillator speed with option of reverse.
- Distortion effect based on breaking addressing of samples (like on circuit bending).
- Complex effect contains lofi, overload, noise, ringmod, flanger, phaser.
- Step sequencer can control selected parameter and envelope generator (ADSR).
- Individual or group of LFO for each effect with additional modes and BPM sync.
- The "Main effect" function for control several parameters simultaneously.
Additional features:
- More 50 predefined presets with wide range of effects.
- Scenes for storing and loading all operation parameters.
- Pack the scene and all its samples and presets to single file.
- Convenient file manager with groups of files by name or date.
- Access samples and records via standard iOS app "Files".
- Complete MIDI control for all faders, knobs and other modes.
- Adaptive UI for portrait and landscape orientation.
- Different color schemes available for UI.
- Detailed application description (built-in and PDF file).
- Inter-App audio compatible (with transport and BPM controls).
- Supports Audiobus 3 with "State Saving" and MIDI features.
- Supports Ableton Link with start / stop sync.
Requirements:
Third generation of iPad or fifth generation of iPhone and higher is required.
You can find more details about FieldScaper on the website:
https://motion-soundscape.blogspot.com
Overview and demo:
https://youtu.be/n9nQRN6xWGo
https://youtu.be/cCr5UPkdMY0
https://youtu.be/Kp88NkJpy2M
The main advantage is that you can record and modify samples along the way within the single app. You can record sounds and noises, delete unwanted parts and then use presets to give a whole new sounding or create spectacular soundscapes and textures to use them as loops in this app. And even use FieldScaper as effect in real time with other apps or external input.
The FieldScaper consists of two main parts. The first part is the field recorder with special options for different ways of record environmental sound from microphone or record other sound sources. With the sample editor you can cut or split the source sample for more convenient use. The second part is the scaper sound engine that with using dynamic presets can easily transform the most ordinary sounds into something absolutely different. These parts connect with each other into one whole but you can use recorder or scaper independently.
The FieldScaper supports complete MIDI control for all faders, knobs and many buttons. You can change the parameters of oscillators, filters, delays and mixer by using any external MIDI controller or MIDI apps like sequencers. With the MIDI controllers this app becomes very comfortable to use at live performance.
Field recorder:
- Auto start record when input signal appears.
- Auto stop record when signal below threshold or by time.
- Record series of samples by a signal presence.
- Recorder timer in seconds or measure (sync with BPM).
- Input signal monitor with different modes.
- Automatic gain control, cut off input filters and noise gate.
- Advanced sample editor (delete, trim, split, cut, copy, paste, undo).
- Filter and normalizer for recorded sample.
Scaper sound engine:
- Loop based mode for processing input in real time as effect.
- Three sample-based oscillators, each with set of effects.
- Low-pass, high-pass, band-pass, band-stop filters with resonance.
- Two range delay with smooth time change and additional modes.
- Advanced spatial mixer / reverb with changing of side and distance.
- Three-band parametric equalizer for each oscillator.
- Wide range changing of oscillator speed with option of reverse.
- Distortion effect based on breaking addressing of samples (like on circuit bending).
- Complex effect contains lofi, overload, noise, ringmod, flanger, phaser.
- Step sequencer can control selected parameter and envelope generator (ADSR).
- Individual or group of LFO for each effect with additional modes and BPM sync.
- The "Main effect" function for control several parameters simultaneously.
Additional features:
- More 50 predefined presets with wide range of effects.
- Scenes for storing and loading all operation parameters.
- Pack the scene and all its samples and presets to single file.
- Convenient file manager with groups of files by name or date.
- Access samples and records via standard iOS app "Files".
- Complete MIDI control for all faders, knobs and other modes.
- Adaptive UI for portrait and landscape orientation.
- Different color schemes available for UI.
- Detailed application description (built-in and PDF file).
- Inter-App audio compatible (with transport and BPM controls).
- Supports Audiobus 3 with "State Saving" and MIDI features.
- Supports Ableton Link with start / stop sync.
Requirements:
Third generation of iPad or fifth generation of iPhone and higher is required.
You can find more details about FieldScaper on the website:
https://motion-soundscape.blogspot.com
Overview and demo:
https://youtu.be/n9nQRN6xWGo
https://youtu.be/cCr5UPkdMY0
https://youtu.be/Kp88NkJpy2M
Version history
2.2
2021-10-26
This update improves compatibility with new devices with different aspect ratios and compatibility with new versions of iOS. Also added support for bluetooth midi controllers, the sound engine has been slightly optimized and the description of the app has been updated.
2.1.5
2020-05-13
Optimization for the new iOS requirements.
Some improvements of the user interface.
Several minor bugs were fixed.
Some improvements of the user interface.
Several minor bugs were fixed.
2.1.2
2019-08-17
- Fixed bug with IAA in iOS 12.4.
- Audiobus SDK 3.0.7 updated.
- Audiobus SDK 3.0.7 updated.
2.1
2019-03-28
● Added several new presets with use sequencer.
● Added controls for mic and external input.
● Added midi controls for sample edit.
● Optimization for iPhone Xr, Xs, Max.
● Several improvements of UI.
● Ableton Link SDK 3.0.5 updated.
● Audiobus SDK 3.0.6 updated.
● Built-in description updated.
● Several minor bugs were fixed.
● Added controls for mic and external input.
● Added midi controls for sample edit.
● Optimization for iPhone Xr, Xs, Max.
● Several improvements of UI.
● Ableton Link SDK 3.0.5 updated.
● Audiobus SDK 3.0.6 updated.
● Built-in description updated.
● Several minor bugs were fixed.
2.0.2
2018-07-17
Version 2.0.2 Bugfix: LFOs of Oscillator 3 doesn't work properly.
What's new in version 2.0:
With this update you can add rhythmic effects and distortions with using built-in step sequencer. The sequencer and LFOs can be synced with other apps and devices thru MIDI, Inter-App Audio or with Ableton Link. New parametric equalizer can isolate or suppress oscillators output in a certain frequency range so that they not interfere each other. Also you can pack scene and all its presets and samples to single file. This new feature is very useful for copying scene to another device or backup.
All changes:
● Added new presets.
● Ableton Link start / stop sync.
● Step sequencer for each oscillator.
● Parametric equalizer for each oscillator.
● Signal amplification before filters and EQ.
● Automatic gain control of output for each oscillator.
● Synced Sequencer / LFOs with Ableton Link, IAA, MIDI.
● Pack scene and all its samples / presets to single file.
● Ableton Link SDK 3.0.2 updated.
● Audiobus SDK 3.0.5 updated.
● Built-in description updated.
● Several minor bugs were fixed.
What's new in version 2.0:
With this update you can add rhythmic effects and distortions with using built-in step sequencer. The sequencer and LFOs can be synced with other apps and devices thru MIDI, Inter-App Audio or with Ableton Link. New parametric equalizer can isolate or suppress oscillators output in a certain frequency range so that they not interfere each other. Also you can pack scene and all its presets and samples to single file. This new feature is very useful for copying scene to another device or backup.
All changes:
● Added new presets.
● Ableton Link start / stop sync.
● Step sequencer for each oscillator.
● Parametric equalizer for each oscillator.
● Signal amplification before filters and EQ.
● Automatic gain control of output for each oscillator.
● Synced Sequencer / LFOs with Ableton Link, IAA, MIDI.
● Pack scene and all its samples / presets to single file.
● Ableton Link SDK 3.0.2 updated.
● Audiobus SDK 3.0.5 updated.
● Built-in description updated.
● Several minor bugs were fixed.
2.0
2018-07-13
With this update you can add rhythmic effects and distortions with using built-in step sequencer. The sequencer and LFOs can be synced with other apps and devices thru MIDI, Inter-App Audio or with Ableton Link. New parametric equalizer can isolate or suppress oscillators output in a certain frequency range so that they not interfere each other. Also you can pack scene and all its presets and samples to single file. This new feature is very useful for copying scene to another device or backup.
All changes:
● Added new presets.
● Ableton Link start / stop sync.
● Step sequencer for each oscillator.
● Parametric equalizer for each oscillator.
● Signal amplification before filters and EQ.
● Automatic gain control of output for each oscillator.
● Synced Sequencer / LFOs with Ableton Link, IAA, MIDI.
● Pack scene and all its samples / presets to single file.
● Ableton Link SDK 3.0.2 updated.
● Audiobus SDK 3.0.5 updated.
● Built-in description updated.
● Several minor bugs were fixed.
All changes:
● Added new presets.
● Ableton Link start / stop sync.
● Step sequencer for each oscillator.
● Parametric equalizer for each oscillator.
● Signal amplification before filters and EQ.
● Automatic gain control of output for each oscillator.
● Synced Sequencer / LFOs with Ableton Link, IAA, MIDI.
● Pack scene and all its samples / presets to single file.
● Ableton Link SDK 3.0.2 updated.
● Audiobus SDK 3.0.5 updated.
● Built-in description updated.
● Several minor bugs were fixed.
1.9.12
2018-04-30
Bugfix: Color schemes not changing. Input boost and a few presets added.
Version 1.9:
With this update you can access FieldScaper records and samples by using iOS 11 Files app. Just open app "Files" - "On My iPad (iPhone)" - "FieldScaper" to copy, move, delete or rename any file which contains in FieldScaper. Also with Files app you can easily copy samples to FieldScaper from any other apps or storage cloud services.
All changes:
Added several new presets.
Added new effects in oscillator controls.
Optimization for use on iPhone X.
Access files thru iOS 11 Files app.
Audiobus SDK updated.
Built-in description updated.
Several minor bugs were fixed.
Version 1.9:
With this update you can access FieldScaper records and samples by using iOS 11 Files app. Just open app "Files" - "On My iPad (iPhone)" - "FieldScaper" to copy, move, delete or rename any file which contains in FieldScaper. Also with Files app you can easily copy samples to FieldScaper from any other apps or storage cloud services.
All changes:
Added several new presets.
Added new effects in oscillator controls.
Optimization for use on iPhone X.
Access files thru iOS 11 Files app.
Audiobus SDK updated.
Built-in description updated.
Several minor bugs were fixed.
1.9
2018-04-25
With this update you can access FieldScaper records and samples by using iOS 11 Files app. Just open app "Files" - "On My iPad (iPhone)" - "FieldScaper" to copy, move, delete or rename any file which contains in FieldScaper. Also with Files app you can easily copy samples to FieldScaper from any other apps or storage cloud services.
All changes:
● Added several new presets.
● Added new effects in oscillator controls.
● Optimization for use on iPhone X.
● Access files thru iOS 11 Files app.
● Audiobus SDK updated.
● Built-in description updated.
● Several minor bugs were fixed.
All changes:
● Added several new presets.
● Added new effects in oscillator controls.
● Optimization for use on iPhone X.
● Access files thru iOS 11 Files app.
● Audiobus SDK updated.
● Built-in description updated.
● Several minor bugs were fixed.
1.8.5
2018-02-21
Version 1.8.5:
● Bugfix: App crash in iOS 11.2.5
What's new in version 1.8:
● Added support of Ableton Link.
● Added support of Audiobus 3.
● Added support of Audiobus MIDI.
● New mode "Manual" in the looper.
● Additional LFO ranges.
● Sync start with Ableton Link.
● Several new presets added.
● Updated Dropbox support.
● Improvements of user interface.
● Built-in description updated.
● Minor bug fixes.
● Bugfix: App crash in iOS 11.2.5
What's new in version 1.8:
● Added support of Ableton Link.
● Added support of Audiobus 3.
● Added support of Audiobus MIDI.
● New mode "Manual" in the looper.
● Additional LFO ranges.
● Sync start with Ableton Link.
● Several new presets added.
● Updated Dropbox support.
● Improvements of user interface.
● Built-in description updated.
● Minor bug fixes.
1.8.2
2017-11-01
Version 1.8.2:
● Bugfix: App crash in some cases when use sample editor.
What's new in version 1.8:
● Added support of Ableton Link.
● Added support of Audiobus 3.
● Added support of Audiobus MIDI.
● New mode "Manual" in the looper.
● Additional LFO ranges.
● Sync start with Ableton Link.
● Several new presets added.
● Updated Dropbox support.
● Improvements of user interface.
● Built-in description updated.
● Minor bug fixes.
● Bugfix: App crash in some cases when use sample editor.
What's new in version 1.8:
● Added support of Ableton Link.
● Added support of Audiobus 3.
● Added support of Audiobus MIDI.
● New mode "Manual" in the looper.
● Additional LFO ranges.
● Sync start with Ableton Link.
● Several new presets added.
● Updated Dropbox support.
● Improvements of user interface.
● Built-in description updated.
● Minor bug fixes.
1.8
2017-10-23
● Added support of Ableton Link.
● Added support of Audiobus 3.
● Added support of Audiobus MIDI.
● New mode "Manual" in the looper.
● Additional LFO ranges.
● Sync start with Ableton Link.
● Several new presets added.
● Updated Dropbox support.
● Improvements of user interface.
● Built-in description updated.
● Minor bug fixes.
● Added support of Audiobus 3.
● Added support of Audiobus MIDI.
● New mode "Manual" in the looper.
● Additional LFO ranges.
● Sync start with Ableton Link.
● Several new presets added.
● Updated Dropbox support.
● Improvements of user interface.
● Built-in description updated.
● Minor bug fixes.
1.7
2016-11-11
This update adds new options to the field recorder which is the one of main parts of FieldScaper specially designed for recording and editing samples, noises and environmental sounds. Also in this update:
● Improved automatic gain control for recorder.
● Marking sample on minimum points of level for cutting.
● Additional editor option - Filter and Normalizer.
● Additional editor option - Undo operation.
● Selecting part of sample during playback as effect.
● MIDI controls for selecting part of sample.
● Individual or group LFO for each effect parameter.
● Inverting LFO value for each parameter.
● LFO rate defined in seconds or beats with BPM sync.
● Sync BPM with main or alter MIDI device or thru IAA.
● Several new presets added.
● Built-in description updated.
● Minor bug fixes.
● Improved automatic gain control for recorder.
● Marking sample on minimum points of level for cutting.
● Additional editor option - Filter and Normalizer.
● Additional editor option - Undo operation.
● Selecting part of sample during playback as effect.
● MIDI controls for selecting part of sample.
● Individual or group LFO for each effect parameter.
● Inverting LFO value for each parameter.
● LFO rate defined in seconds or beats with BPM sync.
● Sync BPM with main or alter MIDI device or thru IAA.
● Several new presets added.
● Built-in description updated.
● Minor bug fixes.
1.6
2016-05-20
● Added several new presets.
● Added band stop filter option in filter section.
● Anti-aliasing filter in clock control section.
● Turning off ring modulator in distortion section.
● Small improvements of audio engine.
● New color schemes for user interface.
● Built-in description updated.
● Minor bug fixes.
● Added band stop filter option in filter section.
● Anti-aliasing filter in clock control section.
● Turning off ring modulator in distortion section.
● Small improvements of audio engine.
● New color schemes for user interface.
● Built-in description updated.
● Minor bug fixes.
1.5
2016-04-27
● Full screen recorder / sample editor for iPhone landscape.
● Supported Dropbox service for download and upload files.
● Improved Inter-App Audio support as Musical Instrument and Effect.
● Supported Inter-App Audio MIDI connection, BPM and transport controls.
● List of assignable MIDI controls divided by categories.
● Direct, Pick-up and Scaling modes for faders with MIDI controller.
● Sending states of buttons and faders for display state on MIDI controller.
● Improved automatic start for mode "Loop A" in the looper.
● Improved user interface for built-in description.
● Updated description of the application.
● Several minor bugs have been fixed.
● Supported Dropbox service for download and upload files.
● Improved Inter-App Audio support as Musical Instrument and Effect.
● Supported Inter-App Audio MIDI connection, BPM and transport controls.
● List of assignable MIDI controls divided by categories.
● Direct, Pick-up and Scaling modes for faders with MIDI controller.
● Sending states of buttons and faders for display state on MIDI controller.
● Improved automatic start for mode "Loop A" in the looper.
● Improved user interface for built-in description.
● Updated description of the application.
● Several minor bugs have been fixed.
1.4
2016-03-21
● New user interface of the Looper mode specially designed for real-time controls.
● Four different modes of processing audio from external sources (include IAA and AB).
● Assignable buttons for quick select presets in the Looper mode.
● Assignable buttons for quick select samples for oscillators.
● New square waveform added for LFOs.
● Option for random modulation of all waveforms in LFO.
● The main effect value can be inverted for different parameters.
● New controls for High and Low cutoff filters on the input.
● Stop recording time when input signal below threshold.
● Several new sound mangling presets.
● Updated description of the application.
● Description in single PDF available on application site.
● Fixed bug in editing MP3 files.
● Several minor bugs have been fixed.
● Four different modes of processing audio from external sources (include IAA and AB).
● Assignable buttons for quick select presets in the Looper mode.
● Assignable buttons for quick select samples for oscillators.
● New square waveform added for LFOs.
● Option for random modulation of all waveforms in LFO.
● The main effect value can be inverted for different parameters.
● New controls for High and Low cutoff filters on the input.
● Stop recording time when input signal below threshold.
● Several new sound mangling presets.
● Updated description of the application.
● Description in single PDF available on application site.
● Fixed bug in editing MP3 files.
● Several minor bugs have been fixed.
1.3
2016-02-18
● New improved waveform controls.
● Added feature of edit the sample.
● Zoom and scroll waveform.
● View of one or both channels.
● Split and trim sample.
● Cut, copy and paste part of sample.
● Align selected part on measures.
● Editor supports audio clipboard.
● Fade In / Out applied when editing.
● Built-in description updated.
● Minor bug fixes.
● Added feature of edit the sample.
● Zoom and scroll waveform.
● View of one or both channels.
● Split and trim sample.
● Cut, copy and paste part of sample.
● Align selected part on measures.
● Editor supports audio clipboard.
● Fade In / Out applied when editing.
● Built-in description updated.
● Minor bug fixes.
1.2
2016-01-20
● Added scenes for saving all operation parameters.
● Added "Internal recorder" for recording the main output.
● Presets and scenes can copy / paste thru the text clipboard.
● Additional button for start / stop all oscillators.
● Audio input parameters on the main screen (for iPad).
● Some improvements of user interface.
● Fixed bug in processing midi commands.
● Built-in description updated.
● Minor bug fixes.
● Added "Internal recorder" for recording the main output.
● Presets and scenes can copy / paste thru the text clipboard.
● Additional button for start / stop all oscillators.
● Audio input parameters on the main screen (for iPad).
● Some improvements of user interface.
● Fixed bug in processing midi commands.
● Built-in description updated.
● Minor bug fixes.
1.1
2015-10-21
● Fixed sample rate issue on iPhone 6s.
● Improved user interface and sound engine.
● Each oscillator start separately.
● One oscillator can be started in loop mode, others playback samples.
● File markers In and Out stored for each file.
● Improved performance.
● Built-in description updated.
● Minor bug fixes.
● Improved user interface and sound engine.
● Each oscillator start separately.
● One oscillator can be started in loop mode, others playback samples.
● File markers In and Out stored for each file.
● Improved performance.
● Built-in description updated.
● Minor bug fixes.
1.0
2015-10-20
Ways to hack FieldScaper
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download FieldScaper MOD APK
Request a Hack
Ratings
4.9 out of 5
62 Ratings
Reviews
BozoToo,
No longer broken
I had previously written a 4-star review of this ap because it is a very creative and innovative approach to sound design. I really LIKED it (just as I have really liked all of the aps by this developer).
HOWEVER ...suddenly my FieldScaper on both my iPads was broken.
I have FieldScaper on two iPads: an iPad 4 running iOS 10 and an iPad Pro 12.9 “ running iOS 11.2.1. On BOTH iPads for reasons unexplainable by modern science, FieldScaper would not load any stored “Scenes” (the combination of audio files and preset effects). When I tried, nothing would change - all of the files and presets remain unchanged regardless of which Scene I tried to load. No one else seems to have had this problem.
The developer tried to solve the problem, but apparently could not duplicate it. Kudos for the effort...
That was THEN this is NOW ...
All that has changed with the latest version. With the 2.0+ releases, this problem has been fixed. I have still lost all my previous presets and all audio files (both factory and my own). But now I can confidently create new materials and actually save them.
The additions in this version are also a great advance and push my opinion of FieldScaper solidly into the five star range. The parametric EQ sequencers (three - one for each “oscilator”) and new synchronizing abilities have elevate FieldScaper beyond its previous status as one of the most innovative music aps available.
HOWEVER ...suddenly my FieldScaper on both my iPads was broken.
I have FieldScaper on two iPads: an iPad 4 running iOS 10 and an iPad Pro 12.9 “ running iOS 11.2.1. On BOTH iPads for reasons unexplainable by modern science, FieldScaper would not load any stored “Scenes” (the combination of audio files and preset effects). When I tried, nothing would change - all of the files and presets remain unchanged regardless of which Scene I tried to load. No one else seems to have had this problem.
The developer tried to solve the problem, but apparently could not duplicate it. Kudos for the effort...
That was THEN this is NOW ...
All that has changed with the latest version. With the 2.0+ releases, this problem has been fixed. I have still lost all my previous presets and all audio files (both factory and my own). But now I can confidently create new materials and actually save them.
The additions in this version are also a great advance and push my opinion of FieldScaper solidly into the five star range. The parametric EQ sequencers (three - one for each “oscilator”) and new synchronizing abilities have elevate FieldScaper beyond its previous status as one of the most innovative music aps available.
Shizin,
I was wrong with my last review
I guess the software was acting weird for a bit when I was trying to make a new track after a long period of artist block, but after a few relaunches of the app everything worked as expected. This is an extremely intuitive app which allows me to create rich and full tones of other worldly origins. Almost every parameter can be modulated with lfo's allowing a generative movement of drones fading in and out, morphing, and decaying. I love this app to death. I am completely satisfied with this purchase after so many year (it's only really been like 2, but still). I hope this app is supported for the years to come.
woodywall,
Versatile sound processing
The abundance of controls can be intimidating at first, but once you start using the app you’ll find it’s easy to use. The ways in which it can alter the original sound are amazing. A simple spoken phrase can turn into all sorts of ambient textures.
gravytop,
Hours of fun
This is easily one of the most well-thought out, intuitive, and capable noise/music apps I’ve seen. Requests to developer for help have been quickly answered. I, too, hope it is supported in perpetuity.
skiphunt,
This is an incredible app that keeps getting better!
I can’t believe I’m just now reviewing this app. It was one of my first audio apps for iOS that completely opened up my imagination to what’s possible with surreal sound sculpting.
This developer is one of my longtime favorites and all of his apps are stellar. I own all of them!
FieldScaper was superb when I first bought it years ago, and it just keeps getting better and more refined.
Highly recommended!!!
This developer is one of my longtime favorites and all of his apps are stellar. I own all of them!
FieldScaper was superb when I first bought it years ago, and it just keeps getting better and more refined.
Highly recommended!!!
Lightnin Rick,
Great sound mangling app!
Love this app. Recently added an iPad to my arsenal of guitar effects. This is one I am getting a lot of use out of. Plus, it has sparked my interest in collecting recordings of ambient and environmental sounds.
Madrayken,
Ambient Field Kit and Swiss Army Knife
I'm not going to write a long review. If you're interested in sound, field recording, ambient music, or any kind of sonic experimentation, you really should buy this.
It's as indispensable as Paulstretch or granular processing.
It's as indispensable as Paulstretch or granular processing.
Ben Efitofadoubt,
Wonderful mangler and massager
Deep, but accessible; I find myself using this far more often than Fieldscaper. It has an organic weirdness to it...and that's good.
Zjenji,
Update addresses sampler crash.
Really hoping for an iPhone X update. Love this app more than any other vocal samplers though. Must But!
Dessication,
The Only App I Have Ever Reviewed
I have never written a review of an app as I have never been impressed enough to act as a salesperson on behalf of a company that sold me a product. If it works perfectly as described, good, that is what it is supposed to do. Anyone can read the description and expect a fair transaction, professional reviewers exist to tell you more details.
In this sole instance, I simply can no longer ignore my moral compulsion to act as an emissary to the world of artists on behalf of this app and developer.
Igor Vasiliev is a literal genius. This is the next level, it’s god-tier, we’re flying in the 5th-dimensional app dreamscape here.
For a field recorder to collect environmental samples alone (my original goal with this) it is brilliant, I would have been thrilled...but...then there is the warping, the looping, the midi control, the insane amount of detail and information and freedom of control...I honestly do not get how one app at this price can simply ruin all others available from the big names at much higher prices. It seems like it works with everything, hardware and software. It is a muse, a creative world unto itself.
Is Mr. Vasiliev a wizard? An alien visitor? A saint? Try the app and come to your own conclusions, the truth is out there.
I won’t claim to be any sort of authority on sound or a brilliant artist myself, but I have worked in several DAWS and used a wide variety of gear and instruments over the years. I know when something is quality. You can trust me when I tell you that after five minutes in this app you will whisper under your breath “...sick..just sick..this beautiful sonuva...”
If you have the slightest interest in sampling, looping, or experimenting with sound in general, buy this.
May fortune forever bless you, Mr. Vasiliev. I am going to go buy Synthscaper right now.
In this sole instance, I simply can no longer ignore my moral compulsion to act as an emissary to the world of artists on behalf of this app and developer.
Igor Vasiliev is a literal genius. This is the next level, it’s god-tier, we’re flying in the 5th-dimensional app dreamscape here.
For a field recorder to collect environmental samples alone (my original goal with this) it is brilliant, I would have been thrilled...but...then there is the warping, the looping, the midi control, the insane amount of detail and information and freedom of control...I honestly do not get how one app at this price can simply ruin all others available from the big names at much higher prices. It seems like it works with everything, hardware and software. It is a muse, a creative world unto itself.
Is Mr. Vasiliev a wizard? An alien visitor? A saint? Try the app and come to your own conclusions, the truth is out there.
I won’t claim to be any sort of authority on sound or a brilliant artist myself, but I have worked in several DAWS and used a wide variety of gear and instruments over the years. I know when something is quality. You can trust me when I tell you that after five minutes in this app you will whisper under your breath “...sick..just sick..this beautiful sonuva...”
If you have the slightest interest in sampling, looping, or experimenting with sound in general, buy this.
May fortune forever bless you, Mr. Vasiliev. I am going to go buy Synthscaper right now.
