Remote Legacy Hack 3.7.11 + Redeem Codes
Filmic Remote Legacy
Developer: FiLMiC Inc
Category: Photo & Video
Price: Free
Version: 3.7.11
ID: com.cinegenix.filmicremote
Screenshots
Description
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers wireless control and monitoring of your Filmic Pro experience. Filmic Remote puts your spare iOS devices into the production process.
Remote v3 offers three modes of capability: Control, Monitor and Director.
Control mode provides the familiar Filmic Pro interface for complete remote camera control over hard to reach camera placements such as sliders, jib arms, car mounts, microphone stand or other compelling live event camera placements. Set up your Filmic Pro device and then control all settings and recordings from the Remote:
- Start/Stop record functions.
- Focus/exposure reticle placement and locking.
- Dual arc slider manual controls for focus and exposure.
- Pull-to-point focus and exposure pulls.
- Create and load Filmic Pro presets from Filmic Remote.
Monitor mode gives you cinema production capability for a fraction of the cost, offering a four-up display with the following powerful analytics:
- Video preview: Reference video for use with analytics screens.
- Waveform monitor: Visually identifies signal brightness segmented from left to right across a video feed. Used in conjunction with the video preview it can provide a quick snapshot of brightness in your video.
- Vectorscope: Displays color saturation, by channel, across the entire image.
- Histograms: RGB composite, Luminance, Zone and RGB channel.
Director mode provides a clean video preview. This is perfect for providing a director, producer or crew with a device to monitor the production remotely.
You can switch between modes on the fly to check analytics and composition. Remote can also be set up in ‘preview-only’ mode allowing a camera operator to perform all controls from the device running Filmic Pro and allowing the Remote to be used solely for monitoring.
Create your mobile studio today with Filmic Remote!
Notes:
- The use of Filmic Remote on one iOS device requires the simultaneous use of Filmic Pro on an additional device. Both devices must be running iOS 13 or later.
- Filmic Remote connects to Filmic Pro using Wi-Fi either on an established network or using a peer-to-peer network (for using in areas where a Wi-Fi network is not present).
- Filmic Remote can connect to any iPhone or iPad running Filmic Pro and is not cross platform.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers wireless control and monitoring of your Filmic Pro experience. Filmic Remote puts your spare iOS devices into the production process.
Remote v3 offers three modes of capability: Control, Monitor and Director.
Control mode provides the familiar Filmic Pro interface for complete remote camera control over hard to reach camera placements such as sliders, jib arms, car mounts, microphone stand or other compelling live event camera placements. Set up your Filmic Pro device and then control all settings and recordings from the Remote:
- Start/Stop record functions.
- Focus/exposure reticle placement and locking.
- Dual arc slider manual controls for focus and exposure.
- Pull-to-point focus and exposure pulls.
- Create and load Filmic Pro presets from Filmic Remote.
Monitor mode gives you cinema production capability for a fraction of the cost, offering a four-up display with the following powerful analytics:
- Video preview: Reference video for use with analytics screens.
- Waveform monitor: Visually identifies signal brightness segmented from left to right across a video feed. Used in conjunction with the video preview it can provide a quick snapshot of brightness in your video.
- Vectorscope: Displays color saturation, by channel, across the entire image.
- Histograms: RGB composite, Luminance, Zone and RGB channel.
Director mode provides a clean video preview. This is perfect for providing a director, producer or crew with a device to monitor the production remotely.
You can switch between modes on the fly to check analytics and composition. Remote can also be set up in ‘preview-only’ mode allowing a camera operator to perform all controls from the device running Filmic Pro and allowing the Remote to be used solely for monitoring.
Create your mobile studio today with Filmic Remote!
Notes:
- The use of Filmic Remote on one iOS device requires the simultaneous use of Filmic Pro on an additional device. Both devices must be running iOS 13 or later.
- Filmic Remote connects to Filmic Pro using Wi-Fi either on an established network or using a peer-to-peer network (for using in areas where a Wi-Fi network is not present).
- Filmic Remote can connect to any iPhone or iPad running Filmic Pro and is not cross platform.
Version history
3.7.11
2023-07-20
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
3.7.10
2023-07-18
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
3.7.9
2022-11-22
v3.7.9 includes minor improvements for a better remote control experience.
3.7.8
2022-08-25
V3.7.8 of FiLMiC Remote improves the quality of live preview when paired with FiLMiC Pro on devices running iOS 15.4 and newer, and also adds support for ProRes LogV3+ selection under the Imaging > Tone Panel.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to [email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to [email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
3.7.7
2022-08-15
V3.7.7 of FiLMiC Remote improves the quality of live preview when paired with FiLMiC Pro on devices running iOS 15.4 and newer, and also adds support for ProRes LogV3+ selection under the Imaging > Tone Panel.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to [email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to [email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
3.7.6
2022-04-22
V3.7.6 of FiLMiC Remote improves the quality of live preview when paired with FiLMiC Pro on devices running iOS 15.4 and newer, and also adds support for ProRes LogV3+ selection under the Imaging > Tone Panel.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to [email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to [email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
3.7.5
2021-12-22
v3.7.5 is a small maintenance release including bug fixes and performance improvements.
If you have any questions, suggestions, or findings please contact us at [email protected]
If you have any questions, suggestions, or findings please contact us at [email protected]
3.7.4
2021-12-18
v3.7.4 is a small maintenance release including bug fixes and performance improvements.
If you have any questions, suggestions, or findings please contact us at [email protected]
If you have any questions, suggestions, or findings please contact us at [email protected]
3.7.3
2021-12-02
v3.7.3 of FiLMiC Remote resolves the most frequent crasher and is recommended for all filmmakers.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.7.2
2021-11-30
v3.7.2 of FiLMiC Remote removes our Thanksgiving splash screen and includes assorted minor fixes for a better filming experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.7.1
2021-11-25
v3.7.1 of FiLMiC Remote includes new functionality for an even better remote capture experience:
— New Functionality
• Added support for our brand new Infrared Film Look pack (optional in-app purchase)
• Added support for ProRes formats under the Settings > Resolution menu (requires iPhone 13 as FiLMiC Pro device).
• Added support for Auto/50Hz/60Hz shutter under the Frame Rate menu.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
— New Functionality
• Added support for our brand new Infrared Film Look pack (optional in-app purchase)
• Added support for ProRes formats under the Settings > Resolution menu (requires iPhone 13 as FiLMiC Pro device).
• Added support for Auto/50Hz/60Hz shutter under the Frame Rate menu.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.7.0
2021-09-02
v3.7 of FiLMiC Remote adds full support for film looks which were made available in FiLMiC Pro 6.16.0.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.6.0
2021-06-29
v3.6.0 of FiLMiC Remote includes new functionality and bug fixes for an even better remote capture experience:
— New Functionality
• Added support for the new ultra-wide selfie camera available on the M1 iPad Pro!
• Added support to select Stereo mics under the Settings > Audio menu.
— Bug Fixes and Performance Improvements
• Fixed a bug in which using the manual arc pull points could cause manual controls to become unresponsive.
• Fixed a bug which could cause the reticle to appear locked when it was unlocked.
• Plenty more under the hood improvements for a better capture experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
— New Functionality
• Added support for the new ultra-wide selfie camera available on the M1 iPad Pro!
• Added support to select Stereo mics under the Settings > Audio menu.
— Bug Fixes and Performance Improvements
• Fixed a bug in which using the manual arc pull points could cause manual controls to become unresponsive.
• Fixed a bug which could cause the reticle to appear locked when it was unlocked.
• Plenty more under the hood improvements for a better capture experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.5.1
2021-05-29
v3.5.1 of FiLMiC Remote includes the following feature and performance improvements:
— Ultra-wide selfie lens support for M1 iPad Pros!
— Support for 1.55x anamorphic lenses.
— Reticle interaction has been greatly improved, especially when reticles overlap with each other, or with the manual arcs. You should find these much easier to interact with.
— Horizontal image flip and vertical image flip (35mm lens adapter) can now be enabled concurrently.
— Live analytics no longer available on iPhone 6s/6s+/SEgen1 when in 4K to improve capture reliability. Max frame rate for Flat/Log capture has been reduced to 25fps to improve frame rate adherence.
— Support for iOS 12 has been removed. iOS 13 or newer is now required for FiLMiC Remote.
— Preset settings have been updated to match the new design recently introduced in FiLMIC Pro.
— Lots of minor bug fixes for a smoother shooting experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
— Ultra-wide selfie lens support for M1 iPad Pros!
— Support for 1.55x anamorphic lenses.
— Reticle interaction has been greatly improved, especially when reticles overlap with each other, or with the manual arcs. You should find these much easier to interact with.
— Horizontal image flip and vertical image flip (35mm lens adapter) can now be enabled concurrently.
— Live analytics no longer available on iPhone 6s/6s+/SEgen1 when in 4K to improve capture reliability. Max frame rate for Flat/Log capture has been reduced to 25fps to improve frame rate adherence.
— Support for iOS 12 has been removed. iOS 13 or newer is now required for FiLMiC Remote.
— Preset settings have been updated to match the new design recently introduced in FiLMIC Pro.
— Lots of minor bug fixes for a smoother shooting experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.5.0
2021-04-30
v3.5.0 of FiLMiC Remote adds full support for the exciting new features introduced in FiLMiC Pro v6.14.0:
— Quick lens picker: You can now switch lenses directly from the main camera UI. No more diving into settings to switch between lenses! We’ve also revamped the camera menu under settings to include more information about each lens including the aperture and 35mm equivalent focal length.
— Advanced CMS support. Under Settings > CMS > you now can access ‘Advanced’ CMS which allows you to adopt a file naming scheme found on traditional cinema cameras. This will help integrate FiLMiC Pro into more traditional workflows. Our previous CMS option is still there, and has just been rebranded as ‘Slate’.
— Plenty of minor bug fixes and performance improvements.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
— Quick lens picker: You can now switch lenses directly from the main camera UI. No more diving into settings to switch between lenses! We’ve also revamped the camera menu under settings to include more information about each lens including the aperture and 35mm equivalent focal length.
— Advanced CMS support. Under Settings > CMS > you now can access ‘Advanced’ CMS which allows you to adopt a file naming scheme found on traditional cinema cameras. This will help integrate FiLMiC Pro into more traditional workflows. Our previous CMS option is still there, and has just been rebranded as ‘Slate’.
— Plenty of minor bug fixes and performance improvements.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.4.1
2021-04-07
v3.4.1 of FiLMiC Remote includes numerous bug fixes, performance enhancements, and new functionality, including:
— You can now mirror your Remote preview only, under ‘Settings’ > ‘Device’ > ‘Mirror Preview Image’. This will not impact the recorded file and is for preview framing purposes only.
— Full frame reticles now auto unlock after engaging them via a double-tap for a snappier auto shooting experience.
— Improvements to the notification HUD in FiLMiC Remote.
— Plenty of minor bugs have been squashed for a smoother remote shooting experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
— You can now mirror your Remote preview only, under ‘Settings’ > ‘Device’ > ‘Mirror Preview Image’. This will not impact the recorded file and is for preview framing purposes only.
— Full frame reticles now auto unlock after engaging them via a double-tap for a snappier auto shooting experience.
— Improvements to the notification HUD in FiLMiC Remote.
— Plenty of minor bugs have been squashed for a smoother remote shooting experience.
If you have any questions, suggestions or findings please contact us at [email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
3.4.0
2020-12-23
v.3.4.0 of Remote adds full support for 10-bit capture and LogV3 which was introduced in v6.13.0 of FiLMiC Pro.
If you have any questions, suggestions or findings please contact us at [email protected] - and if you enjoy shooting with FiLMiC Pro, please consider leaving us a review. Happy filming!
If you have any questions, suggestions or findings please contact us at [email protected] - and if you enjoy shooting with FiLMiC Pro, please consider leaving us a review. Happy filming!
3.3.2
2020-11-18
v3.2.2 of FiLMiC Remote includes better support for iPhone 12 series devices, and adds Russian and Korean localizations.
If you have any questions, suggestions or findings, please contact us at [email protected]
If you have any questions, suggestions or findings, please contact us at [email protected]
3.3.1
2020-10-20
v3.3.1 of FiLMiC Remote includes multiple bug fixes and performance enhancements for a smoother remote control shooting experience, and is recommended for all filmmakers.
If you have any questions, suggestions or findings, please contact us at [email protected]
If you have any questions, suggestions or findings, please contact us at [email protected]
3.3.0
2020-09-21
FiLMiC Remote v3.3.0 adds support for iOS 14.
If you have any questions, suggestions, or findings please contact us at [email protected]
If you have any questions, suggestions, or findings please contact us at [email protected]
3.2.2
2020-09-09
v3.2.2 of Remote includes bug fixes and performance improvements and is recommended for all filmmakers.
If you have any questions, suggestions or findings please contact us at [email protected]
If you have any questions, suggestions or findings please contact us at [email protected]
3.2.1
2020-01-03
v3.2.1 of FiLMiC Remote includes further stability improvements and performance optimizations and is recommend for all filmmakers.
If you have any questions, suggestions or findings please contact us at [email protected]
If you have any questions, suggestions or findings please contact us at [email protected]
3.2
2019-12-19
v3.2 of FiLMiC Remote includes numerous performance and stability improvements and is recommended for all filmmakers:
- Connection reliability has been improved.
- All known crashes have been resolved.
- White balance controls restored during recording in Remote.
- Support for manual exposure control of ultra wide lens on iPhone 11/11 Pro devices.
If you have any questions, suggestions or findings please contact us at [email protected]
- Connection reliability has been improved.
- All known crashes have been resolved.
- White balance controls restored during recording in Remote.
- Support for manual exposure control of ultra wide lens on iPhone 11/11 Pro devices.
If you have any questions, suggestions or findings please contact us at [email protected]
3.1
2019-03-29
v3.1 includes performance optimizations and bug fixes for FiLMiC Remote. It resolves an issue that prevented the zebra live analytic from displaying.
3.0.1
2017-12-21
Bug fixes and performance improvements
Ways to hack Remote Legacy
- Redeem codes (Get the Redeem codes)
Download hacked APK
Download Remote Legacy MOD APK
Request a Hack
Ratings
2 out of 5
108 Ratings
Reviews
Mithrandier was taken,
Lag in control ruins the app.
I certainly appreciate being able to frame a shot on the bigger screen of my iPad, but I downloaded this so I could adjust focus while recording without having to tap the screen and create that little shake in my video. For this, it’s useless. Here’s why.
I want to gently and smoothly go from focused on a character in the foreground to the one in the background. Filmic pro has this feature. You can set two focal lengths and set a speed to go from one to the other. It can go fast or very slow or everything in between. It’s buttery smooth.
BUT!!! When you use the remote to do this, the lag makes it so that when you start the buttery smooth process of changing from one focus to the next, the signal from the remote doesn’t change the focus smoothly. The phone gets no signal to change for a moment, so nothing does, then, when the remote device is done with the smooth change it focus, that signal gets sent to the recording phone. So when you play back the video, what you have is the opposite of buttery smooth. It is a jagged snapping from one focal length to another. It makes the best feature of the remote literally unusable.
It’s not a remote, it’s a laggy monitor. Not useless, but a million miles from what it purports to be.
I want to gently and smoothly go from focused on a character in the foreground to the one in the background. Filmic pro has this feature. You can set two focal lengths and set a speed to go from one to the other. It can go fast or very slow or everything in between. It’s buttery smooth.
BUT!!! When you use the remote to do this, the lag makes it so that when you start the buttery smooth process of changing from one focus to the next, the signal from the remote doesn’t change the focus smoothly. The phone gets no signal to change for a moment, so nothing does, then, when the remote device is done with the smooth change it focus, that signal gets sent to the recording phone. So when you play back the video, what you have is the opposite of buttery smooth. It is a jagged snapping from one focal length to another. It makes the best feature of the remote literally unusable.
It’s not a remote, it’s a laggy monitor. Not useless, but a million miles from what it purports to be.
InnerAlchemyCenter,
Filmic Support is Great!
I’m changing my review after getting really great tech support from the Filmic crew. I had an issue of the remote not being able to control both the iPhone 12 and 13 Max Pro as camera A and B because it was calling them the same name, and still doing so after I changed the names of both phones to be different. Turns out the app was using the old names from cache inside the Filmic Pro app - so reinstalling the remote app was not getting it to see the new names! I reinstalled Filmic Pro on both phones and it now sees the new phone names and allows me to control both phones. Thank God they explained it to me and that resolved the issue, now I can control both phones and all is well with the remote app again.
Being a one man film crew, I use this app on my iPad to lock the exposure and focus with me as the subject from both camera angles, and for this the app is great!
Being a one man film crew, I use this app on my iPad to lock the exposure and focus with me as the subject from both camera angles, and for this the app is great!
Frankdrizzo,
It works
There is lag as others have mentioned but it’s transmitting and controlling over WiFi so it’s to be expected. It’s NOT supposed to be a Teradek system.
My issue is switching between 2 iPhones, doesn’t work. Tested with an iPhone 5s and 8 Plus. The Remote app needed to be restarted to display the feed that was not the first one viewed. Even though the other appears in the list of devices, the app had to be quit and restarted to switch to the other device and see video. Both phones are running different version of iOS (12.4.5 and 13.3.1) so possible API differences could be a factor. Dunno.
My issue is switching between 2 iPhones, doesn’t work. Tested with an iPhone 5s and 8 Plus. The Remote app needed to be restarted to display the feed that was not the first one viewed. Even though the other appears in the list of devices, the app had to be quit and restarted to switch to the other device and see video. Both phones are running different version of iOS (12.4.5 and 13.3.1) so possible API differences could be a factor. Dunno.
JohnSlaughterJr,
DO NOT BUY THIS APP!!
The reviews from 2 years ago are *still* valid. This app *cannot* do any manual control. Set two focus points and it *cannot smoothly move between them*. Same with exposure. It seems easy enough to sync the two start/stop settings targets and just remotely tell the cam to now move between them as if you had just tapped it, but for some reason this is beyond this app’s capability.
You *can* press record. I’ll make myself feel better by saying the 1-star I have to give it is for being able to do that. Kudos. You earned that 1 star!
Now fix everything else please.
You *can* press record. I’ll make myself feel better by saying the 1-star I have to give it is for being able to do that. Kudos. You earned that 1 star!
Now fix everything else please.
ICU 2,
Not usable for serious people
This app is buggy. It never connects since last update. I must go into FiLMiC turn OFF remote control then turn it back on for FiLMiC realizes there is a device available to connect. Every single time very annoying but doable. What makes this app not useful is how badly pixelated the view is from the remote. I tried everything for get rid of the pixelation and nothing works. Deleting and reinstalling the app does not fix the problem. Last update made this useless.
Forsoothful,
Great for controlling hard to reach B camera
Used this for controlling an iPhone 14 placed on a mic stand above a piano keyboard. Able to start and end record function and monitor operation for over an hour. App was running on an iPad Pro 12 inch (2019). Sure beats climbing up on a ladder.
Yes there is a lag on the iPad monitor but the iPhone video is pristine. Even with lag I can see pianist’s hands and confirm a good result. Very pleased.
Yes there is a lag on the iPad monitor but the iPhone video is pristine. Even with lag I can see pianist’s hands and confirm a good result. Very pleased.
No More Amazon Books,
Please address video lag
The app is a good idea in principle but the implementation needs work.
The video on my 2020 iPad Pro lags behind the video on my iPhone 11 by 2-3 seconds, which makes the app pretty useless as a viewfinder for blocking motion.
I think it would be far more useful if the developers would compress the video by a factor of 5-10 to reduce the lag to a couple hundred milliseconds. I’d much rather sacrifice preview quality to reduce lag.
The video on my 2020 iPad Pro lags behind the video on my iPhone 11 by 2-3 seconds, which makes the app pretty useless as a viewfinder for blocking motion.
I think it would be far more useful if the developers would compress the video by a factor of 5-10 to reduce the lag to a couple hundred milliseconds. I’d much rather sacrifice preview quality to reduce lag.
CTTalking,
Remote and Pro app will not pair
I have an iPhone 12 Pro and iPad Air 4 and the Filmic Remote app on my iPad will not connect with the Filmic Pro app on my iPhone. It reads it and starts to connect then disconnects. I am on a strong WiFi system but that doesn’t seem to matter. Have tried everything, including reinstalling but get the same result. Very disappointed with this product and expected much better after watching several videos about it.
No Joke!,
**v3.4.1 - CAUTION** Horrible Latency
I love this APP. I personally use it for my iPhone 12 Pro Max. Unfortunately, this update has left me unable to effectively use its remote capabilities. The latency gets worse and worse the longer you have the APP open. It was consistently greater than 30 seconds till I finally gave up.
If you decide to try it anyway, please take the time to back up your device before updating.
I hope a fix is coming soon!
If you decide to try it anyway, please take the time to back up your device before updating.
I hope a fix is coming soon!
SageMaster493,
Firstlight support
I love the capability of this app, though it would be much better if the Filmic Firstlight photo app was also able to be remote controlled by this. That way you could compose the shot, figure out focus, lighting, and colors, all while being in the shot yourself.
